C-Line in oscam

[marmuel2009]

Hallo zusammen,

ich habe eine neue Vu+ Solo 4k mit dem aktuellen VTI-Image und einer aktuellen Oscam.
Bislang hatte ich eine Dreambox und dort testweise 5 funktionierende C-Lines von einem entfernten Server drin.

Diese 5 C-Lines habe ich nun versucht in die Oscam zu integrieren. Leider ohne Erfolg. Für Tipps bin ich sehr dankbar! Liebe Grüße Martin

Spoiler: oscam Logfile

-------------------------------------------------------------------------------

>> OSCam << cardserver log switched at Thu Jan 1 01:00:10 1970

-------------------------------------------------------------------------------

1970/01/01 01:00:10 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11233 (arm-oe-linux-gnueabi)

1970/01/01 01:00:10 00000000 s (main) System name = Linux

1970/01/01 01:00:10 00000000 s (main) Host name = vusolo4k

1970/01/01 01:00:10 00000000 s (main) Release = 3.14.28-1.8

1970/01/01 01:00:10 00000000 s (main) Version = #1 SMP Mon May 16 09:21:25 CEST 2016

1970/01/01 01:00:10 00000000 s (main) Machine = armv7l

1970/01/01 01:00:10 00000000 s (main) Stb model = dm8000

1970/01/01 01:00:10 00000000 s (main) Stb vumodel = vusolo4k

1970/01/01 01:00:10 00000000 s (main) Stb boxtype = vusolo4k

1970/01/01 01:00:10 00000000 s (main) The current system time is smaller than the build date (May 13 2016). Waiting up to 60 seconds for time to correct

2016/09/26 07:52:17 00000000 s (config) services reloaded: 0 services freed, 69 services loaded, rejected 4

2016/09/26 07:52:17 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled

2016/09/26 07:52:17 00000000 s (main) signal handling initialized

2016/09/26 07:52:17 00000000 s (config) 966 provid's loaded

2016/09/26 07:52:17 00000000 s (net) monitor: initialized (fd=4, port=988, prio=1)

2016/09/26 07:52:17 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)

2016/09/26 07:52:17 00000000 s (emmcache) loading emmcache disabled since no reader is using it!

2016/09/26 07:52:17 00000000 s (emmcache) loading emmstats disabled since no reader is using it!

2016/09/26 07:52:17 00000000 s (anticasc) anti cascading disabled

2016/09/26 07:52:17 58D17337 h (webif) webif: decompressed 169172 bytes back into 409808 bytes

2016/09/26 07:52:17 58D17337 h (webif) HTTP Server couldn't bind on port 23750 (errno=98 Address already in use). Not starting HTTP!

2016/09/26 07:52:17 6878B792 c (client) plain dvbapi-client granted (dvbapi, au=auto (1 reader))

2016/09/26 07:52:17 6878B792 c (dvbapi) Error in oscam.dvbapi: ret=-1 | a: 0000 000000 0000 10000

2016/09/26 07:52:17 6878B792 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache

2016/09/26 07:52:17 6878B792 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0 maximum amount of possible filters is 32 (oscam limit is 32)

2016/09/26 07:52:18 6878B792 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 09C4 ECM_PID: 1B0E PROVID: 000000

2016/09/26 07:52:18 6878B792 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 09AF ECM_PID: 1F0E PROVID: 000000

2016/09/26 07:52:18 6878B792 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 098C ECM_PID: 1A0E PROVID: 000000

2016/09/26 07:52:18 6878B792 c (dvbapi) Demuxer 0 found 3 ECMpids and 4 STREAMpids in caPMT

2016/09/26 07:52:18 6878B792 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!

2016/09/26 07:52:18 6878B792 c (dvbapi) Demuxer 0 found 3 ECMpids and 4 STREAMpids in PMT

2016/09/26 07:52:19 6878B792 c (dvbapi) Demuxer 1 ecmpid 0 CAID: 09C4 ECM_PID: 1B6C PROVID: 000000

2016/09/26 07:52:19 6878B792 c (dvbapi) Demuxer 1 ecmpid 1 CAID: 098C ECM_PID: 1A6C PROVID: 000000

2016/09/26 07:52:19 6878B792 c (dvbapi) Demuxer 1 ecmpid 2 CAID: 09AF ECM_PID: 1F6C PROVID: 000000

2016/09/26 07:52:19 6878B792 c (dvbapi) Demuxer 1 found 3 ECMpids and 5 STREAMpids in caPMT

2016/09/26 07:52:19 6878B792 c (dvbapi) Demuxer 1 no suitable readers found that can be used for decoding!

2016/09/26 07:52:22 6878B792 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:52:23 6878B792 c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:52:27 6878B792 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:52:28 6878B792 c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:52:32 6878B792 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:52:33 6878B792 c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:52:37 6878B792 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:52:38 6878B792 c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:52:42 6878B792 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:52:43 6878B792 c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:52:47 6878B792 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:52:48 6878B792 c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:52:51 6878B792 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:52:53 6878B792 c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:52:56 6878B792 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:52:58 6878B792 c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:53:01 6878B792 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:53:03 6878B792 c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:53:06 6878B792 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:53:08 6878B792 c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:53:11 6878B792 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:53:13 6878B792 c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:53:16 6878B792 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:53:18 6878B792 c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:53:21 6878B792 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:53:23 6878B792 c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:53:26 6878B792 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:53:28 6878B792 c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:53:31 6878B792 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:53:33 6878B792 c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:53:36 6878B792 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:53:38 6878B792 c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/09/26 07:53:41 6878B792 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

Spoiler: oscam.server

#[reader]

label = cccam

protocol = cccam

device = XXXX,XXXX

user = XXXXr

password = XXXX

caid = 09C4,1702

cccversion = 2.0.11

cccmaxhops = 2

ccckeepalive = 1

Group = 1



#[reader]

label = cccam

protocol = cccam

device = XXXX,XXXX

user = XXXXr

password = XXXX

caid = 09C4,1702

cccversion = 2.0.11

cccmaxhops = 2

ccckeepalive = 1

Group = 2



#[reader]

label = cccam

protocol = cccam

device = XXXX,XXXX

user = XXXXr

password = XXXX

caid = 09C4,1702

emmcache = 1,1,2

Group = 3

cccversion = 2.0.11

cccmaxhops = 2

ccckeepalive = 1



#[reader]

label = cccam

protocol = cccam

device = XXXX,XXXX

user = XXXXr

password = XXXX

caid = 09C4,1702

Group = 4

cccversion = 2.0.11

cccmaxhops = 2

ccckeepalive = 1



#[reader]

label = cccam

protocol = cccam

device = XXXX,XXXX

user = XXXXr

password = XXXX

caid = 09C4,1702

Group = 5

cccversion = 2.0.11

cccmaxhops = 2

ccckeepalive = 1

 

[Phantom]

Gebe mal jeden Reader ein einzigartigen Namen unter Label. Dann kann auch der Log besser ausgewertet werden.

 

[axel]

Hi,

des Weiteren die "#" vor "[READER] entfernen, cccversion = 2.3.0 anpassen.

Gruß

 

[pehedima]

Nimm bitte die vorgeschlagenen Änderungen vor, starte oscam neu und psote erneut die oscam.log vom oscam start an.

 

[marmuel2009]

Vielen Dank Euch für den super Support. Ich bin aktuell nicht an der Box. Ich werde es heute Abend testen und berichten.
Ein paar Fragen habe ich noch:

Muss ich außer der .server noch weitere Dateien anpassen?
Muss ich die CAID angeben, oder nimmt die Oscam automatisch die für den jeweiligen Sender passende CAID?

Danke Euch

Ach ja, muss die Group dann immer 1 sein oder bei 5 Clines 1,2,3,4,5?

 

[czutok]

den caid 1702 kanst du auch löschen , der existiert nicht mehr seit über 1 jahr

caid = 09C4,1702

und die linies kanst du als group 12345 machen , dann jedem klienten must du auch die group 12345 freischalten

oder alle 5 linien mit group 1 , dann bei klienten auch nur group 1 freigeben

 

[marmuel2009]

So, leider erfolglos getestet....Sky & alle anderen Caids bleiben dunkel.

Meine oscam.server untenstehend. dvbapi ist leer.

Spoiler: Oscam.server

[reader]

label = cccam c1

protocol = cccam

device = XXXXXXXXXX,12001

user = XXXXXXXXXX

password = XXXXXXXXXX

caid = 09C4,098C,1830,1833,0D05,0D95,0648,0100,0500

cccversion = 2.3.0

ccckeepalive = 1

cccwantemu = 1

group = 1



[reader]

label = cccam c2

protocol = cccam

device = XXXXXXXXXX,12000

user = XXXXXXXXXX

password = XXXXXXXXXX

caid = 09C4,098C,1830,1833,0D05,0D95,0648,0100,0500

cccversion = 2.3.0

ccckeepalive = 1

cccwantemu = 1

group = 1



[reader]

label = cccam c3

protocol = cccam

device = XXXXXXXXXX,12001

user = XXXXXXXXXX

password = XXXXXXXXXX

caid = 09C4,098C,1830,1833,0D05,0D95,0648,0100,0500

emmcache = 1,1,2

group = 1

cccversion = 2.3.0

ccckeepalive = 1

cccwantemu = 1



[reader]

label = cccam c4

protocol = cccam

device = XXXXXXXXXX,12001

user = XXXXXXXXXX

password = XXXXXXXXXX

caid = 09C4,098C,1830,1833,0D05,0D95,0648,0100,0500

group = 1

cccversion = 2.3.0

ccckeepalive = 1

cccwantemu = 1



[reader]

label = cccam c5

protocol = cccam

device = XXXXXXXXXX,12000

user = XXXXXXXXXX

password = XXXXXXXXXX

caid = 09C4,098C,1830,1833,0D05,0D95,0648,0100,0500

group = 1

cccversion = 2.3.0

ccckeepalive = 1

cccwantemu = 1

Das zugehörige Log aus dem WebIf:

Spoiler: Oscam.log

• 2016/09/26 21:10:28 00000000 s (main) System name = Linux
• 2016/09/26 21:10:28 00000000 s (main) Host name = vusolo4k
• 2016/09/26 21:10:28 00000000 s (main) Release = 3.14.28-1.8
• 2016/09/26 21:10:28 00000000 s (main) Version = #1 SMP Mon May 16 09:21:25 CEST 2016
• 2016/09/26 21:10:28 00000000 s (main) Machine = armv7l
• 2016/09/26 21:10:28 00000000 s (main) Stb model = dm8000
• 2016/09/26 21:10:28 00000000 s (main) Stb vumodel = vusolo4k
• 2016/09/26 21:10:28 00000000 s (main) Stb boxtype = vusolo4k
• 2016/09/26 21:10:28 00000000 s (main) creating pidfile /tmp with pid 2051
• 2016/09/26 21:10:28 00000000 s (config) services reloaded: 0 services freed, 69 services loaded, rejected 4
• 2016/09/26 21:10:28 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2016/09/26 21:10:28 00000000 s (main) signal handling initialized
• 2016/09/26 21:10:28 00000000 s (config) 966 provid's loaded
• 2016/09/26 21:10:28 00000000 s (main) Cannot open /tmp/.oscam/oscam.version (errno=20 Not a directory)
• 2016/09/26 21:10:28 00000000 s (reader) cccam_c1 [cccam] creating thread for device XXXCline-IPXXX
• 2016/09/26 21:10:28 00000000 s (reader) cccam_c2 [cccam] creating thread for device XXXCline-IPXXX
• 2016/09/26 21:10:28 00000000 s (reader) cccam_c3 [cccam] creating thread for device XXXCline-IPXXX
• 2016/09/26 21:10:28 00000000 s (reader) cccam_c4 [cccam] creating thread for device XXXCline-IPXXX
• 2016/09/26 21:10:28 00000000 s (reader) cccam_c5 [cccam] creating thread for device XXXCline-IPXXX
• 2016/09/26 21:10:28 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=20 Not a directory)
• 2016/09/26 21:10:28 00000000 s (anticasc) anti cascading disabled
• 2016/09/26 21:10:28 477B4C95 p (reader) XXXCline-IPXXX: resolved ip=XXXCline-IPXXX
• 2016/09/26 21:10:28 477B4C95 p (reader) cccam_c1 [cccam] connecting to XXXCline-IPXXX:12001
• 2016/09/26 21:10:28 5D418ABB p (reader) XXXCline-IPXXX: resolved ip=XXXCline-IPXXX
• 2016/09/26 21:10:28 5D418ABB p (reader) cccam_c2 [cccam] connecting to XXXCline-IPXXX:12000
• 2016/09/26 21:10:28 787EAE3E h (webif) webif: decompressed 169172 bytes back into 409808 bytes
• 2016/09/26 21:10:28 787EAE3E h (webif) HTTP Server running. ip=0.0.0.0 port=8888
• 2016/09/26 21:10:28 28491427 p (reader) XXXCline-IPXXX: resolved ip=XXXCline-IPXXX
• 2016/09/26 21:10:28 28491427 p (reader) cccam_c5 [cccam] connecting to XXXCline-IPXXXm:12000
• 2016/09/26 21:10:28 1692282A p (reader) XXXCline-IPXXX: resolved ip=XXXCline-IPXXX
• 2016/09/26 21:10:28 1692282A p (reader) cccam_c3 [cccam] connecting to XXXCline-IPXXXm:12001
• 2016/09/26 21:10:28 7D377CF5 p (reader) XXXCline-IPXXX: resolved ip=XXXCline-IPXXX
• 2016/09/26 21:10:28 7D377CF5 p (reader) cccam_c4 [cccam] connecting to XXXCline-IPXXX:12001
• 2016/09/26 21:10:28 5D418ABB p (reader) cccam_c2 [cccam] connect failed: Connection refused
• 2016/09/26 21:10:28 5D418ABB p (reader) cccam_c2 [cccam] proxy initialized, server XXXCline-IPXXX:12000
• 2016/09/26 21:10:29 1692282A p (reader) cccam_c3 [cccam] proxy initialized, server XXXCline-IPXXX:12001
• 2016/09/26 21:10:29 7D377CF5 p (reader) cccam_c4 [cccam] proxy initialized, server XXXCline-IPXXX:12001
• 2016/09/26 21:10:29 28491427 p (reader) cccam_c5 [cccam] proxy initialized, server XXXCline-IPXXX:12000
• 2016/09/26 21:10:29 477B4C95 p (reader) cccam_c1 [cccam] proxy initialized, server XXXCline-IPXXX:12001
• 2016/09/26 21:10:41 5D418ABB p (reader) cccam_c2 [cccam] connecting to XXXCline-IPXXX:12000
• 2016/09/26 21:10:41 5D418ABB p (reader) cccam_c2 [cccam] connect failed: Connection refused
• 2016/09/26 21:10:54 5D418ABB p (reader) cccam_c2 [cccam] connecting to XXXCline-IPXXX:12000
• 2016/09/26 21:10:54 5D418ABB p (reader) cccam_c2 [cccam] connect failed: Connection refused
• 2016/09/26 21:11:07 5D418ABB p (reader) cccam_c2 [cccam] connecting to XXXCline-IPXXX:12000
• 2016/09/26 21:11:07 5D418ABB p (reader) cccam_c2 [cccam] connect failed: Connection refused
• 2016/09/26 21:11:20 5D418ABB p (reader) cccam_c2 [cccam] connecting to XXXCline-IPXXX:12000
• 2016/09/26 21:11:20 5D418ABB p (reader) cccam_c2 [cccam] connect failed: Connection refused
• 2016/09/26 21:11:46 5D418ABB p (reader) cccam_c2 [cccam] connecting to XXXCline-IPXXX:12000
• 2016/09/26 21:11:46 5D418ABB p (reader) cccam_c2 [cccam] connect failed: Connection refused
• 2016/09/26 21:12:51 5D418ABB p (reader) cccam_c2 [cccam] connecting to XXXCline-IPXXX:12000
• 2016/09/26 21:12:52 5D418ABB p (reader) cccam_c2 [cccam] connect failed: Connection refused
• 2016/09/26 21:13:56 5D418ABB p (reader) cccam_c2 [cccam] connecting to XXXCline-IPXXX:12000
• 2016/09/26 21:13:57 5D418ABB p (reader) cccam_c2 [cccam] connect failed: Connection refused

Spoiler: oscam.user

# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11233

# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]

user = dvbapi

au = 1

group = 1

Spoiler: oscam.conf

[global]

logfile = /tmp/oscam.log

pidfile = /tmp

netprio = 1

nice = -1

maxlogsize = 20

waitforcards = 0

waitforcards_extra_delay = 700

preferlocalcards = 1



[webif]

httpport = 8888

httphelplang = de

httprefresh = 10

httppollrefresh = 10

httpshowpicons = 1

httppiconsize = 55

httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

http_status_log = 0

 

[axel]

Hi,

"Connection Refused" erzählt das Log bei einem Prixy...

Da nochmal Dyndns + Port abgleichen/checken.

Des Weiteren findet keinerlei Abfrage Deinerseits statt...

Gruß

Gesendet von meinem SM-G920F mit Tapatalk

 

[tulpenknicker]

Woher kommen denn die c-lines? Evtl. liegt der fehler ja auch am server?

 

[marmuel2009]

Die C-Lines gingen in der CCCAM auf meiner Dreambox immer, natürlich fällt mal eine aus, dafür habe ich die 5

 

[axel]

Zahlst Du für die Lines?

Gruß

Gesendet von meinem SM-G920F mit Tapatalk

 

[tulpenknicker]

das war nicht die antwort auf meine frage. Poste mal die configs des servers

 

[Derek Buegel]

Haben Deine Lines alle 12000 bzw 12001?
In der oscan.conf fehlt der Abschnitt [dvbapi]

Spoiler

[dvbapi]
au = 1
user = dvbapi
boxtype = dreambox

MfG

 

[marmuel2009]

die config des servers müsste ich erst besorgen, da diese von einem bekannten stammen. das ganze ist bis dato testweise

 

[tulpenknicker]

Dan warten wir darauf