Bitte um Fehlerbeschreibung aus Syslog

Dieses Thema im Forum "Fritzbox Archiv" wurde erstellt von tooone, 19. Dezember 2011.

  1. tooone
    Offline

    tooone Ist oft hier

    Registriert:
    29. März 2009
    Beiträge:
    139
    Zustimmungen:
    30
    Punkte für Erfolge:
    28
    Hallo,
    habe heute folgende Fehler aus dem syslog erhalten.
    FB 7170 Firmware: 29.04.87freetz-devel-8185.
    Kann mir vielleicht einer einmal sagen was dort passiert ist,habe leider keine Ahnung.

    Danke.

    Dec 19 06:00:01 fritz cron.info crond[1425]: crond: USER root pid 2399 cmd /etc/init.d/rc.watchdog c_cr Dec 19 06:00:02 fritz daemon.info init: starting pid 2416, tty '': '/bin/sh -c /etc/inittab.shutdown' Dec 19 06:00:02 fritz user.notice SHUTDOWN: initiated Dec 19 06:00:02 fritz user.notice SHUTDOWN: executing /etc/init.d/rc.mod stop Dec 19 06:00:04 fritz user.notice FREETZMOD: Stopping all packages: Dec 19 06:00:05 fritz user.notice FREETZMOD: inetd: Stopping inetd ... done. Dec 19 06:00:06 fritz user.notice FREETZMOD: authorized-keys: Dec 19 06:00:06 fritz authpriv.info dropbear[1300]: Premature exit: Terminated by signal Dec 19 06:00:06 fritz user.notice FREETZMOD: dropbear: Stopping dropbear SSH server ... done. Dec 19 06:00:06 fritz user.notice FREETZMOD: avm-firewall: Dec 19 06:00:07 fritz user.notice FREETZMOD: watchdog: Stopping ZebraDem.com Watchdog ... done. Dec 19 06:00:08 fritz user.notice FREETZMOD: oscam: Stoppe oscam... oscam gestoppt Dec 19 06:00:08 fritz user.notice FREETZMOD: toolbox: Dec 19 06:00:08 fritz user.notice FREETZMOD: crond: Stopping crond ... not running. Dec 19 06:00:09 fritz user.notice FREETZMOD: telnetd: Stopping AVM telnetd ... done. Dec 19 06:00:10 fritz user.notice FREETZMOD: webcfg: Stopping Freetz webinterface ... done. Dec 19 06:00:11 fritz user.notice FREETZMOD: dsld: Stopping AVM dsld ... done. Dec 19 06:00:11 fritz user.notice FREETZMOD: ftpd: Stopping AVM ftpd ... inetd instances killed, done. Dec 19 06:00:11 fritz user.notice ONLINECHANGED[2630]: [offline] disabled Dec 19 06:00:13 fritz user.notice FREETZMOD: multid: Stopping AVM multid ... done. Dec 19 06:00:13 fritz user.notice FREETZMOD: Stopping all packages finished. Dec 19 06:00:13 fritz user.notice SHUTDOWN: executing /var/post_install Dec 19 06:00:18 fritz user.notice FREETZMOUNT: /var/media/ftp/uStor01 (/dev/sda1) - mounting read-only Dec 19 06:00:18 fritz user.notice FREETZMOUNT: /var/media/ftp/uStor01 (/dev/sda1) - forcing unmount Dec 19 06:00:21 fritz user.err FREETZMOUNT: /var/media/ftp/uStor01 (/dev/sda1) - still used by /bin/busybox: /var/media/ftp/uStor01/logs/syslogd.log Dec 19 06:00:22 fritz user.err FREETZMOUNT: /var/media/ftp/uStor01 (/dev/sda1) - could not be unmounted Dec 19 06:00:37 fritz user.notice FREETZMOUNT: /var/media/ftp/uStor01 (/dev/sda1) - mounting read-only Dec 19 06:00:37 fritz user.notice FREETZMOUNT: /var/media/ftp/uStor01 (/dev/sda1) - forcing unmount Dec 19 06:00:40 fritz user.err FREETZMOUNT: /var/media/ftp/uStor01 (/dev/sda1) - still used by /bin/busybox: /var/media/ftp/uStor01/logs/syslogd.log Dec 19 06:00:41 fritz user.err FREETZMOUNT: /var/media/ftp/uStor01 (/dev/sda1) - could not be unmounted Dec 19 06:00:43 fritz user.notice FREETZMOUNT: /var/media/ftp/uStor01 (/dev/sda1) - mounting read-only Dec 19 06:00:43 fritz user.notice FREETZMOUNT: /var/media/ftp/uStor01 (/dev/sda1) - forcing unmount Dec 19 06:00:45 fritz user.err FREETZMOUNT: /var/media/ftp/uStor01 (/dev/sda1) - still used by /bin/busybox: /var/media/ftp/uStor01/logs/syslogd.log Dec 19 06:00:46 fritz user.err FREETZMOUNT: /var/media/ftp/uStor01 (/dev/sda1) - could not be unmounted Dec 19 06:02:28 fritz syslog.info syslogd started: BusyBox v1.19.3 Dec 19 06:02:28 fritz user.notice kernel: klogd started: BusyBox v1.19.3 (2011-12-05 21:05:45 CET) Dec 19 06:02:28 fritz user.notice kernel: Linux version 2.6.13.1-ohio (3964) (gcc-Version 3.4.6) #1 Thu May 5 16:23:59 CEST 2011 Dec 19 06:02:28 fritz user.warn kernel: memsize=32 MByte Dec 19 06:02:28 fritz user.warn kernel: flashsize=8 MByte Dec 19 06:02:28 fritz user.warn kernel: &_end=0x942317e4 PFN_ALIGN(&_end)=0x94232000 CPHYSADDR(PFN_ALIGN(&_end))=0x14232000 memsize=0x2000000 Dec 19 06:02:28 fritz user.warn kernel: CPU revision is: 00018448 Dec 19 06:02:28 fritz user.warn kernel: [ohio_gpio_init] Dec 19 06:02:28 fritz user.warn kernel: Determined physical RAM map: Dec 19 06:02:28 fritz user.warn kernel: memory: 00232000 @ 14000000 (reserved) Dec 19 06:02:28 fritz user.warn kernel: memory: 01dce000 @ 14232000 (usable) Dec 19 06:02:28 fritz user.warn kernel: On node 0 totalpages: 8192 Dec 19 06:02:28 fritz user.warn kernel: [alloc_node_mem_map] reduce size from 2883616 Bytes to 262176 Bytes Dec 19 06:02:28 fritz user.notice FREETZMOD: Starting syslogd ... done. Dec 19 06:02:28 fritz user.warn kernel: [alloc_node_mem_map]: (org) sizeof(mem_map) = 262176 mem_map=0x94235000-0x94275020 Dec 19 06:02:28 fritz user.warn kernel: [alloc_node_mem_map]: sizeof(mem_map) = 2883616 mem_map=0x93fb5000-0x94275020 Dec 19 06:02:28 fritz user.warn kernel: zone=0 zone_size[j]=0x90112 Dec 19 06:02:28 fritz user.warn kernel: realsize=8192 Dec 19 06:02:28 fritz user.warn kernel: DMA zone: 8192 pages, LIFO batch:3 Dec 19 06:02:28 fritz user.warn kernel: zone=1 zone_size[j]=0x0 Dec 19 06:02:28 fritz user.warn kernel: realsize=0 Dec 19 06:02:28 fritz user.warn kernel: Normal zone: 0 pages, LIFO batch:1 Dec 19 06:02:28 fritz user.warn kernel: zone=2 zone_size[j]=0x0 Dec 19 06:02:28 fritz user.warn kernel: realsize=0 Dec 19 06:02:28 fritz user.warn kernel: HighMem zone: 0 pages, LIFO batch:1 Dec 19 06:02:28 fritz user.warn kernel: Built 1 zonelists Dec 19 06:02:28 fritz user.notice kernel: Kernel command line: console=ttyS0,38400n8r Dec 19 06:02:28 fritz user.warn kernel: [ld_mmu_r4xx0] memcpy((void *)(CAC_BASE + 0x100), &except_vec2_generic, 0x30) Dec 19 06:02:28 fritz user.warn kernel: Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes. Dec 19 06:02:28 fritz user.warn kernel: Primary data cache 8kB, 4-way, linesize 16 bytes. Dec 19 06:02:28 fritz user.warn kernel: Synthesized TLB refill handler (20 instructions). Base=0x941f4a0c Dec 19 06:02:28 fritz user.warn kernel: TLB synthesizer field overflow (simm) Dec 19 06:02:28 fritz user.warn kernel: Synthesized TLB load handler fastpath (34 instructions) Base=0x941f8620. Dec 19 06:02:28 fritz user.warn kernel: TLB synthesizer field overflow (simm) Dec 19 06:02:28 fritz user.warn kernel: Synthesized TLB store handler fastpath (34 instructions) Base=0x941f8820. Dec 19 06:02:28 fritz user.warn kernel: TLB synthesizer field overflow (simm) Dec 19 06:02:28 fritz user.warn kernel: Synthesized TLB modify handler fastpath (33 instructions) Base=0x941f8a20. Dec 19 06:02:28 fritz user.warn kernel: PID hash table entries: 256 (order: 8, 4096 bytes) Dec 19 06:02:28 fritz user.warn kernel: CPU frequency 211.97 MHz Dec 19 06:02:28 fritz user.warn kernel: Using 105.984 MHz high precision timer. Dec 19 06:02:28 fritz user.warn kernel: [setup_irq]: irq 255 irqaction->handler 0x94041dc0 () Dec 19 06:02:28 fritz user.warn kernel: [register_console] enable commandline console 0 Dec 19 06:02:28 fritz user.warn kernel: Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Dec 19 06:02:28 fritz user.warn kernel: Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Dec 19 06:02:28 fritz user.info kernel: Memory: 30140k/30520k available (1589k kernel code, 320k reserved, 302k data, 116k init, 0k highmem) Dec 19 06:02:28 fritz user.info kernel: totalram_pages= 7550 Dec 19 06:02:28 fritz user.warn kernel: Calibrating delay loop... 211.35 BogoMIPS (lpj=1056768) Dec 19 06:02:28 fritz user.warn kernel: loops_per_jiffy=1056768 Dec 19 06:02:28 fritz user.warn kernel: Mount-cache hash table entries: 512 Dec 19 06:02:28 fritz user.warn kernel: Checking for 'wait' instruction... available. Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941e827c Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941e84fc Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ea428 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ead48 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ead54 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941efdd4 Dec 19 06:02:28 fritz user.info kernel: NET: Registered protocol family 16 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941eb5dc Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941eb864 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941df2c4 Dec 19 06:02:28 fritz user.warn kernel: Can't analyze prologue code at 9418bc04 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ea118 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ebf10 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941edc7c Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ee394 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941eefa4 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ef4dc Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ef6a0 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941efccc Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941efda0 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ea37c Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941eb6f4 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941e78a4 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941e7984 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941e7b90 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941e7f6c Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941e8174 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941e82ac Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941e9774 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941e9bb8 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941e9be0 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941e9f2c Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941e9fe0 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ea020 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ea3e8 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941eaaec Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941eab78 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941eac6c Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941eb2a4 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941eb2ec Dec 19 06:02:28 fritz user.info kernel: Squashfs 2.2-r2b (released 2006/02/23) (C) 2002-2005 Phillip Lougher Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941eb3d0 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941eb3e8 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941eb7a8 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941eb898 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941eba1c Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ebfd0 Dec 19 06:02:28 fritz user.info kernel: avm_net_trace: Up and running. Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ec050 Dec 19 06:02:28 fritz user.info kernel: [avm_power]Ohio250 detected -> overclocking possible Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ec384 Dec 19 06:02:28 fritz user.warn kernel: [avm] configured: watchdog eventled enable shift register enable direct gpio Dec 19 06:02:28 fritz user.warn kernel: gpio usage: reset=12 clock=13 store=10 data=9 Dec 19 06:02:28 fritz user.warn kernel: AR7WDT: Watchdog Driver for AR7 Hardware (Version 1.0, build: May 5 2011 16:21:26) Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ed2cc Dec 19 06:02:28 fritz user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled Dec 19 06:02:28 fritz user.warn kernel: [uart_add_one_port] Dec 19 06:02:28 fritz user.warn kernel: ttyS0 at MMIO 0x0 (irq = 15) is a OHIO_UART Dec 19 06:02:28 fritz user.warn kernel: [uart_add_one_port] dont register console port->type = 16 Dec 19 06:02:28 fritz user.warn kernel: port->cons = 0x941ce300 port->cons->flags = 0x7 Dec 19 06:02:28 fritz user.warn kernel: [uart_add_one_port] success Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941edcc0 Dec 19 06:02:28 fritz user.info kernel: io scheduler noop registered Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941edccc Dec 19 06:02:28 fritz user.err kernel: [cpmac] Version: 1.129 - Revision 790:1110 - Do 5.05.2011 16:22:45 Dec 19 06:02:28 fritz user.err kernel: [avm_event_source_trigger]: not registered Dec 19 06:02:28 fritz user.err kernel: [cpmac] [cpmac_if_register] dev cpmac0 (phy_id 0) registered Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ee19c Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ee304 Dec 19 06:02:28 fritz user.info kernel: tun: Universal TUN/TAP device driver, 1.6 Dec 19 06:02:28 fritz user.info kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ee3dc Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ee3e8 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ee4a8 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ee4b4 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ee4d8 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ee508 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ee554 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ee578 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ee59c Dec 19 06:02:28 fritz user.notice kernel: physmap flash device: 400000 at 10000000 Dec 19 06:02:28 fritz user.info kernel: phys_mapped_flash: Found 1 x16 devices at 0x0 in 16-bit bank Dec 19 06:02:28 fritz user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040 Dec 19 06:02:28 fritz user.warn kernel: phys_mapped_flash: Swapping erase regions for broken CFI table. Dec 19 06:02:28 fritz user.notice kernel: number of CFI chips: 1 Dec 19 06:02:28 fritz user.notice kernel: RedBoot partition parsing not available Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ee70c Dec 19 06:02:28 fritz user.warn kernel: Generic platform RAM MTD, (c) 2004 Simtec Electronics Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ee73c Dec 19 06:02:28 fritz user.notice kernel: Ohio flash driver (size->0x400000 mem->0x10000000) Dec 19 06:02:28 fritz user.warn kernel: flash_size=0x800000 Dec 19 06:02:28 fritz user.warn kernel: flash_mask=0xffffff Dec 19 06:02:28 fritz user.info kernel: Ohio flash memory: Found 1 x16 devices at 0x0 in 16-bit bank Dec 19 06:02:28 fritz user.warn kernel: [genprobe_ident_chips] 4 i 0 j 0 Dec 19 06:02:28 fritz user.warn kernel: [genprobe_ident_chips] 5 i 0 j 1 Dec 19 06:02:28 fritz user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040 Dec 19 06:02:28 fritz user.warn kernel: Ohio flash memory: Swapping erase regions for broken CFI table. Dec 19 06:02:28 fritz user.notice kernel: number of CFI chips: 1 Dec 19 06:02:28 fritz user.warn kernel: [mtd]: jffs2_size = 5 * 64KByte (0x50000 Bytes) Dec 19 06:02:28 fritz user.warn kernel: [ohio_find_hidden_filesystem]: super block found: bytes_used: 0x6914d5/6886613 Dec 19 06:02:28 fritz user.warn kernel: [init_ohio_flash] find hidden filesystem size=0x6d2f00 offset=0xad100 Dec 19 06:02:28 fritz user.warn kernel: [mtd] configure jffs2 partition Dec 19 06:02:28 fritz user.warn kernel: [mtd] fs_size=0x730000 max=0x40000 is=0x50000 max jffs2_size value 4 Dec 19 06:02:28 fritz user.warn kernel: [mtd] ERROR jffs2_size too big, reduce to max Dec 19 06:02:28 fritz user.warn kernel: [mtd] ohio_flash_map: name=Ohio flash memory bankwidth=2 virt=0xb0000000 phys=0x10000000 size=0x800000 Dec 19 06:02:28 fritz user.notice kernel: Creating 7 MTD partitions on "Ohio flash memory": Dec 19 06:02:28 fritz user.notice kernel: 0x000ad100-0x00780000 : "filesystem" Dec 19 06:02:28 fritz user.notice kernel: 'nor-flash' Dec 19 06:02:28 fritz user.warn kernel: 'Bits can be cleared (flash)' Dec 19 06:02:28 fritz user.warn kernel: 'Has an erase function' Dec 19 06:02:28 fritz user.warn kernel: mtd: partition "filesystem" doesn't start on an erase block boundary -- force read-only Dec 19 06:02:28 fritz user.notice kernel: 0x00010000-0x00780000 : "kernel" Dec 19 06:02:28 fritz user.notice kernel: 'nor-flash' Dec 19 06:02:28 fritz user.warn kernel: 'Bits can be cleared (flash)' Dec 19 06:02:28 fritz user.warn kernel: 'Has an erase function' Dec 19 06:02:28 fritz user.notice kernel: 0x00000000-0x00010000 : "bootloader" Dec 19 06:02:28 fritz user.notice kernel: 'nor-flash' Dec 19 06:02:28 fritz user.warn kernel: 'Bits can be cleared (flash)' Dec 19 06:02:28 fritz user.warn kernel: 'Has an erase function' Dec 19 06:02:28 fritz user.notice kernel: 0x00780000-0x007c0000 : "tffs (1)" Dec 19 06:02:28 fritz user.notice kernel: 'nor-flash' Dec 19 06:02:28 fritz user.warn kernel: 'Bits can be cleared (flash)' Dec 19 06:02:28 fritz user.warn kernel: 'Has an erase function' Dec 19 06:02:28 fritz user.notice kernel: 0x007c0000-0x00800000 : "tffs (2)" Dec 19 06:02:28 fritz user.notice kernel: 'nor-flash' Dec 19 06:02:28 fritz user.warn kernel: 'Bits can be cleared (flash)' Dec 19 06:02:28 fritz user.warn kernel: 'Has an erase function' Dec 19 06:02:28 fritz user.notice kernel: 0x00740000-0x00780000 : "jffs2" Dec 19 06:02:28 fritz user.notice kernel: 'nor-flash' Dec 19 06:02:28 fritz user.warn kernel: 'Bits can be cleared (flash)' Dec 19 06:02:28 fritz user.warn kernel: 'Has an erase function' Dec 19 06:02:28 fritz user.notice kernel: 0x00010000-0x00740000 : "Kernel without jffs2" Dec 19 06:02:28 fritz user.notice kernel: 'nor-flash' Dec 19 06:02:28 fritz user.warn kernel: 'Bits can be cleared (flash)' Dec 19 06:02:28 fritz user.warn kernel: 'Has an erase function' Dec 19 06:02:28 fritz user.warn kernel: partition_info[0]: name=filesystem offset=ad100 size=6d2f00 Dec 19 06:02:28 fritz user.warn kernel: partition_info[0]: 0xb00ad100: 0x73717368 0xc03 Dec 19 06:02:28 fritz user.warn kernel: partition_info[1]: name=kernel offset=10000 size=770000 Dec 19 06:02:28 fritz user.warn kernel: partition_info[1]: 0xb0010000: 0xfeed1281 0x9d05e Dec 19 06:02:28 fritz user.warn kernel: partition_info[2]: name=bootloader offset=0 size=10000 Dec 19 06:02:28 fritz user.warn kernel: partition_info[2]: 0xb0000000: 0x40809000 0x40809800 Dec 19 06:02:28 fritz user.warn kernel: partition_info[3]: name=tffs (1) offset=780000 size=40000 Dec 19 06:02:28 fritz user.warn kernel: partition_info[3]: 0xb0780000: 0x40001 0xfdffffff Dec 19 06:02:28 fritz user.warn kernel: partition_info[4]: name=tffs (2) offset=7c0000 size=40000 Dec 19 06:02:28 fritz user.warn kernel: partition_info[4]: 0xb07c0000: 0x40001 0xfcffffff Dec 19 06:02:28 fritz user.warn kernel: partition_info[5]: name=jffs2 offset=740000 size=40000 Dec 19 06:02:28 fritz user.warn kernel: partition_info[5]: 0xb0740000: 0xffffffff 0xffffffff Dec 19 06:02:28 fritz user.warn kernel: partition_info[6]: name=Kernel without jffs2 offset=10000 size=730000 Dec 19 06:02:28 fritz user.warn kernel: partition_info[6]: 0xb0010000: 0xfeed1281 0x9d05e Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ef184 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ef2c8 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941efd94 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941f0a84 Dec 19 06:02:28 fritz user.info kernel: NET: Registered protocol family 2 Dec 19 06:02:28 fritz user.warn kernel: IP route cache hash table entries: 512 (order: -1, 2048 bytes) Dec 19 06:02:28 fritz user.warn kernel: TCP established hash table entries: 2048 (order: 2, 16384 bytes) Dec 19 06:02:28 fritz user.warn kernel: TCP bind hash table entries: 2048 (order: 1, 8192 bytes) Dec 19 06:02:28 fritz user.info kernel: TCP: Hash tables configured (established 2048 bind 2048) Dec 19 06:02:28 fritz user.info kernel: TCP reno registered Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941f349c Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941f34a4 Dec 19 06:02:28 fritz user.info kernel: TCP bic registered Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941f34b0 Dec 19 06:02:28 fritz user.info kernel: mcfw: IGMPv3 fast forwarding Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941f34dc Dec 19 06:02:28 fritz user.info kernel: NET: Registered protocol family 1 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941f357c Dec 19 06:02:28 fritz user.info kernel: NET: Registered protocol family 17 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941f35fc Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941f36b8 Dec 19 06:02:28 fritz user.info kernel: NET: Registered protocol family 8 Dec 19 06:02:28 fritz user.info kernel: NET: Registered protocol family 20 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941f385c Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941de024 Dec 19 06:02:28 fritz user.warn kernel: [setup_irq]: irq 1 irqaction->handler 0x94001590 () Dec 19 06:02:28 fritz user.warn kernel: [setup_irq]: irq 6 irqaction->handler 0x940015a4 () Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x940017e4 Dec 19 06:02:28 fritz user.warn kernel: [ohio_late_init] Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941de160 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941de3dc Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941eb7e4 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x940cdef0 Dec 19 06:02:28 fritz user.info kernel: [avm_new] push_button_gpio=8 value=0 enabled Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ecb40 Dec 19 06:02:28 fritz user.warn kernel: TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0) Dec 19 06:02:28 fritz user.warn kernel: mount on mtd4 and mtd5 (double buffering) Dec 19 06:02:28 fritz user.info kernel: Adam2 environment variables API installed. Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941ed990 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x9412b2a8 Dec 19 06:02:28 fritz user.debug kernel: Calling initcall 0x941f1fa4 Dec 19 06:02:28 fritz user.warn kernel: [prepare_namespace] new mount root /dev/mtdblock1 Dec 19 06:02:28 fritz user.warn kernel: use lzma compression Dec 19 06:02:28 fritz user.warn kernel: VFS: Mounted root (squashfs filesystem) readonly. Dec 19 06:02:28 fritz user.warn kernel: Freeing prom memory: 0kb freed Dec 19 06:02:28 fritz user.info kernel: Freeing unused kernel memory: 116k freed (7579 free) Dec 19 06:02:28 fritz user.warn kernel: [setup_irq]: irq 15 irqaction->handler 0x940da11c () Dec 19 06:02:28 fritz user.warn kernel: AR7WDT: System Init UEberwachung 240 Sekunden Dec 19 06:02:28 fritz user.warn kernel: TFFS Name Table H Dec 19 06:02:28 fritz user.warn kernel: Piglet: module license ' Dec 19 06:02:28 fritz user.warn kernel: (C) Copyright 2005 by AVM Dec 19 06:02:28 fritz user.warn kernel: ' taints kernel. Dec 19 06:02:28 fritz user.info kernel: [avm_new]push_button 'Wlan-Taster' presses: GPIO=8 time=4294938296 Dec 19 06:02:28 fritz user.warn kernel: EMIF: asize=1 ta=3 r_hold=0 w_strobe=6 r_strobe=6 ew=1 Dec 19 06:02:28 fritz user.warn kernel: [piglet]McSP: rFS: 8000 Hz rCLK:2048220 Hz Dec 19 06:02:28 fritz user.info kernel: [avm_new]push_button 'Wlan-Taster', released: GPIO=8 presses=510 key=button_key_1 Dec 19 06:02:28 fritz user.info kernel: JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc. Dec 19 06:02:28 fritz user.err kernel: jffs2: Too few erase blocks (4) Dec 19 06:02:28 fritz user.err kernel: jffs2: Too few erase blocks (4) Dec 19 06:02:28 fritz user.warn kernel: registered device TI Avalanche SAR Dec 19 06:02:28 fritz user.warn kernel: tiatm driver (patch_annex=0xc0041e4c) Dec 19 06:02:28 fritz user.warn kernel: [tiatm] Set StrictPriority=0 Dec 19 06:02:28 fritz user.warn kernel: DSP binary filesize = 322784 bytes Dec 19 06:02:28 fritz user.warn kernel: [dsl_ur8] dsl serial number successfully set to "465249545a21426f78466f6e574c414e37313730303031353043353444393245" Dec 19 06:02:28 fritz user.warn kernel: [tiatm] INFO V2U-BRIDGEREGISTER: 0x00000019 Dec 19 06:02:28 fritz user.info kernel: [avm_power]Ohio250 detected -> overclocking possible Dec 19 06:02:28 fritz user.info kernel: [avm_power]#### boostVoltage: DSP Core voltage set to 1,5 V #### Dec 19 06:02:28 fritz user.warn kernel: [setup_irq]: irq 23 irqaction->handler 0xc002d208 () Dec 19 06:02:28 fritz user.warn kernel: [setup_irq]: irq 31 irqaction->handler 0xc002d258 () Dec 19 06:02:28 fritz user.warn kernel: [tiatm]: Powermanagment (States => 1,3,10) supported! Dec 19 06:02:28 fritz user.warn kernel: Texas Instruments ATM driver: version:[4.08.02.01] Dec 19 06:02:28 fritz user.warn kernel: [tiatm] AvmInterface length: 44 Dec 19 06:02:28 fritz user.warn kernel: ubik2 driver (ubik2 - 0x10=0xc00cd094) Dec 19 06:02:28 fritz user.warn kernel: atm_dsp_register_ubik2: ubik2_ToMIPS_notify=0xc00bebfc Dec 19 06:02:28 fritz user.warn kernel: atm_dsp_register_ubik2: dsp mem pointer 0xa1c10af4 Dec 19 06:02:28 fritz user.err kernel: ubik2_init_interface: DSP-Link Version v3 8480 Dec 19 06:02:28 fritz user.warn kernel: [ubik2_debug]redirect kernel-messages (/dev/debug) Dec 19 06:02:29 fritz user.notice FREETZMOD: Starting inetd ... done. Dec 19 06:02:31 fritz user.notice FREETZMOD: Setting up SSH authorized_keys for root ... done. Dec 19 06:02:32 fritz authpriv.info dropbear[1287]: Running in background Dec 19 06:02:33 fritz user.notice FREETZMOD: Starting dropbear SSH server ... done. Dec 19 06:02:33 fritz user.err telefon[792]: TAM init error Dec 19 06:02:39 fritz cron.info crond[1425]: crond: crond (busybox 1.19.3) started, log level 8 Dec 19 06:02:42 fritz user.notice FREETZMOD: Starting ZebraDem.com Watchdog ... done. Dec 19 06:02:52 fritz user.notice FREETZMOD: Starte oscam... USB-Serial Module geladen Dec 19 06:03:02 fritz user.notice FREETZMOD: /var/media/ftp/uStor01 mit 'Stick-Installation' eingebunden - mount done. Empfohlen wird die Einbindung des Laufwerkes mit 'Mount by Label' Feature! Dec 19 06:03:03 fritz user.notice ONLINECHANGED[573]: [online] approved Dec 19 06:03:03 fritz user.notice ONLINECHANGED[573]: [online] executing /etc/onlinechanged/00-get_ip Dec 19 06:03:04 fritz user.notice ONLINECHANGED[573]: [online] finished Dec 19 06:03:09 fritz user.notice FREETZMOD: rc.mod finished. Dec 19 06:10:01 fritz cron.info crond[1425]: crond: USER root pid 2046 cmd /etc/init.d/rc.watchdog c_ci

    Habe gsehen ist ein bischen unübersichtlich.
    Hier nochmal ein Auszug:

    Dec 19 18:15:02 fritz daemon.info init: starting pid 2289, tty '': '/bin/sh -c /etc/inittab.shutdown'
    Dec 19 18:15:02 fritz user.notice SHUTDOWN: initiated
    Dec 19 18:15:02 fritz user.notice SHUTDOWN: executing /etc/init.d/rc.mod stop
    Dec 19 18:15:03 fritz user.notice FREETZMOD: Stopping all packages:

    Wird alle 12 Stunden gemacht,wie kann ich dies wieder stoppen.

    Gruß hnd Danke
     
    Zuletzt bearbeitet: 19. Dezember 2011
    #1
  2. tooone
    Offline

    tooone Ist oft hier

    Registriert:
    29. März 2009
    Beiträge:
    139
    Zustimmungen:
    30
    Punkte für Erfolge:
    28
    AW: Bitte um Fehlerbeschreibung aus Syslog

    Muß etwas mit dem shutdown Freetz zu tun,haben.
    Aber warum wird dies alle 12 Stunden gemacht!
     
    Zuletzt bearbeitet: 19. Dezember 2011
    #2
  3. märklin
    Offline

    märklin Guest

    AW: Bitte um Fehlerbeschreibung aus Syslog

    schalte mal den Watchdog aus....
     
    #3
  4. tooone
    Offline

    tooone Ist oft hier

    Registriert:
    29. März 2009
    Beiträge:
    139
    Zustimmungen:
    30
    Punkte für Erfolge:
    28
    AW: Bitte um Fehlerbeschreibung aus Syslog

    Danke.
    Habe schon neu geflasht.
    Eine ältere freetz-devel-6740M.
    Mit der neuen war ich überhaupt nicht zufrieden,lief einfach nicht rund.
     
    #4

Diese Seite empfehlen

OK Mehr information

Diese Seite verwendet Cookies. Mit Ihrem Klick auf OK stimmen Sie der Verwendung von Cookies zu. Andernfalls ist die Funktionalität dieser Website beschränkt.