Alles dunkel obwohl user connectet

[schallas]

Hallo

Auf einmal ist es bei allen usern dunkel, obwohl alle connectet sind.
Kann mir jemand helfen ?
Habe schon ein downgrade gemacht, aber nichts hilft, es bleibt dunkel.

LOG

Spoiler

-------------------------------------------------------------------------------
2014/05/30 10:54:59 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r1050 (i486-linux-gnu)
2014/05/30 10:54:59 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 14538
2014/05/30 10:54:59 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2014/05/30 10:54:59 0 s userdb reloaded: 8 accounts loaded, 0 expired, 0 disabled
2014/05/30 10:54:59 0 s signal handling initialized
2014/05/30 10:54:59 0 s 246 service-id's loaded in 3ms
2014/05/30 10:54:59 0 s cccam: initialized (fd=6, port=XXXXX)
2014/05/30 10:54:59 0 s Binary without Seca module - no EMM processing for Seca possible!
2014/05/30 10:54:59 0 s Binary without DRE Crypt module - no EMM processing for DRE Crypt possible!
2014/05/30 10:54:59 0 s Binary without TONGFANG module - no EMM processing for TONGFANG possible!
2014/05/30 10:54:59 0 s Binary without Bulcrypt module - no EMM processing for Bulcrypt possible!
2014/05/30 10:54:59 0 s Binary without Griffin module - no EMM processing for Griffin possible!
2014/05/30 10:54:59 0 s Binary without DGCrypt module - no EMM processing for DGCrypt possible!
2014/05/30 10:54:59 0 s V14 [pcsc] creating thread for device 0
2014/05/30 10:54:59 0 s Hallo [smartreader] creating thread for device 004:002
2014/05/30 10:54:59 0 s camd3emu [unknown] Protocol Support missing. (typ=32)
2014/05/30 10:54:59 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/05/30 10:54:59 0 s waiting for local card init
2014/05/30 10:54:59 992FEE8 r Hallo [smartreader] De SR_init
2014/05/30 10:54:59 992FEE8 r Hallo [smartreader] initing smargo type SR
2014/05/30 10:54:59 992FEE8 r Hallo [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2014/05/30 10:54:59 992FEE8 r Found smartreader device 004:002
2014/05/30 10:54:59 992E220 r V14 [pcsc] Reader initialized (device=0, detect=cd, mhz=357, cardmhz=357)
2014/05/30 10:54:59 994DA40 h webif: decompressed 158126 bytes back into 364940 bytes
2014/05/30 10:54:59 992FEE8 r Hallo [smartreader] Creating smartreader thread.
2014/05/30 10:54:59 992FEE8 r Hallo [smartreader] clocking for smartreader with smartreader protocol
2014/05/30 10:54:59 992FEE8 r Hallo [smartreader] Reader initialized (device=004:002, detect=cd, mhz= AUTO, cardmhz=600)
2014/05/30 10:54:59 994DA40 h HTTP Server running. ip=0.0.0.0 port=16002
2014/05/30 10:55:00 992FEE8 r Hallo [smartreader] card detected
2014/05/30 10:55:00 992FEE8 r Hallo [smartreader] init card at 369 mhz
2014/05/30 10:55:00 992E220 r V14 [pcsc] PCSC was opened with handle: 121313
2014/05/30 10:55:00 992E220 r V14 [pcsc] card detected
2014/05/30 10:55:00 992E220 r V14 [pcsc] ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2014/05/30 10:55:01 992E220 r V14 [pcsc] Card type: P1TV
2014/05/30 10:55:01 992E220 r V14 [pcsc] Rom version: 20AA
2014/05/30 10:55:01 992E220 r V14 [pcsc] Credit available on card: 0 euro
2014/05/30 10:55:01 992E220 r V14 [pcsc] Extended 4C detected
2014/05/30 10:55:01 992E220 r V14 [pcsc] Region Code: xxxxxxx
2014/05/30 10:55:01 992E220 r V14 [pcsc] Pincode read: xxxx
2014/05/30 10:55:01 992E220 r V14 [pcsc] PCB settings: FF FF FF FF
2014/05/30 10:55:01 992E220 r V14 [pcsc] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2014/05/30 10:55:01 992E220 r V14 [pcsc] serial: ########, BoxID: ########, baseyear: 2004
2014/05/30 10:55:01 992E220 r V14 [pcsc] ready for requests
2014/05/30 10:55:01 992E220 r V14 [pcsc] found card system videoguard2
2014/05/30 10:55:01 992E220 r V14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/05/30 10:55:01 992E220 r V14 [videoguard2] card detected
2014/05/30 10:55:01 992E220 r V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/05/30 10:55:01 992E220 r V14 [videoguard2] tier: 2712, expiry date: 2014/02/22-00:01:00
2014/05/30 10:55:01 992E220 r V14 [videoguard2] tier: 2710, expiry date: 2013/12/17-00:01:00
2014/05/30 10:55:01 992E220 r V14 [videoguard2] tier: 005d, expiry date: 2014/09/25-01:00:00
2014/05/30 10:55:01 992E220 r V14 [videoguard2] tier: 005e, expiry date: 2014/09/25-01:00:00
2014/05/30 10:55:01 992E220 r V14 [videoguard2] tier: 0065, expiry date: 2014/09/25-01:00:00
2014/05/30 10:55:01 992E220 r V14 [videoguard2] tier: 0066, expiry date: 2014/09/25-01:00:00
2014/05/30 10:55:01 992E220 r V14 [videoguard2] tier: 0067, expiry date: 2014/09/25-01:00:00
2014/05/30 10:55:01 992E220 r V14 [videoguard2] tier: 0068, expiry date: 2014/09/25-01:00:00
2014/05/30 10:55:01 992E220 r V14 [videoguard2] tier: 0069, expiry date: 2014/09/25-01:00:00
2014/05/30 10:55:01 992E220 r V14 [videoguard2] tier: 006a, expiry date: 2014/09/25-01:00:00
2014/05/30 10:55:01 992E220 r V14 [videoguard2] tier: 006b, expiry date: 2014/09/25-01:00:00
2014/05/30 10:55:01 992E220 r V14 [videoguard2] tier: 006f, expiry date: 2014/09/25-01:00:00
2014/05/30 10:55:01 992E220 r V14 [videoguard2] tier: 007b, expiry date: 2014/09/25-01:00:00
2014/05/30 10:55:01 992E220 r V14 [videoguard2] tier: 007d, expiry date: 2014/09/25-01:00:00
2014/05/30 10:55:01 992E220 r V14 [videoguard2] tier: 0081, expiry date: 2014/09/25-01:00:00
2014/05/30 10:55:01 992E220 r V14 [videoguard2] tier: 008e, expiry date: 2014/09/25-01:00:00
2014/05/30 10:55:01 992E220 r V14 [videoguard2] tier: 00c0, expiry date: 2014/09/25-01:00:00
2014/05/30 10:55:01 992E220 r V14 [videoguard2] tier: 00c7, expiry date: 2014/09/25-01:00:00
2014/05/30 10:55:01 992E220 r V14 [videoguard2] tier: 00c8, expiry date: 2014/09/25-01:00:00
2014/05/30 10:55:01 992E220 r V14 [videoguard2] tier: 00c9, expiry date: 2014/09/25-01:00:00
2014/05/30 10:55:01 992E220 r V14 [videoguard2] tier: 00ca, expiry date: 2014/09/25-01:00:00
2014/05/30 10:55:01 992E220 r V14 [videoguard2] tier: 00d4, expiry date: 2014/09/25-01:00:00
2014/05/30 10:55:01 992E220 r V14 [videoguard2] tier: 00e4, expiry date: 2014/09/25-01:00:00
2014/05/30 10:55:01 992E220 r V14 [videoguard2] tier: 00e5, expiry date: 2014/09/25-01:00:00
2014/05/30 10:55:01 992E220 r V14 [videoguard2] tier: 00f3, expiry date: 2014/09/25-01:00:00
2014/05/30 10:55:01 992E220 r V14 [videoguard2] tier: 00fa, expiry date: 2014/09/25-01:00:00
2014/05/30 10:55:01 992E220 r V14 [videoguard2] tier: 00ff, expiry date: 2014/09/25-01:00:00
2014/05/30 10:55:01 992FEE8 r Hallo [smartreader] ATR: 3B 34 94 00 30 42 30 30
2014/05/30 10:55:02 992FEE8 r Hallo [smartreader] Init card protocol T0, FI=9, F=512, D=8, N=0
2014/05/30 10:55:02 992FEE8 r Hallo [smartreader] Calculated work ETU is 11.99 us reader mhz = 534
2014/05/30 10:55:02 992FEE8 r Hallo [smartreader] autospeed = 1
2014/05/30 10:55:02 992FEE8 r Hallo [smartreader] Effective reader settings mhz =534 F= 512 D= 8 N=0 T=0 inv=0 parity=EVEN
2014/05/30 10:55:02 992FEE8 r Hallo [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2014/05/30 10:55:03 992FEE8 r Hallo [smartreader] type: Conax, caid: 0B02, serial: ##########, hex serial: ########, card: v64
2014/05/30 10:55:03 992FEE8 r Hallo [smartreader] Providers: 1
2014/05/30 10:55:03 992FEE8 r Hallo [smartreader] Provider: 1 Provider-Id: 000000
2014/05/30 10:55:03 992FEE8 r Hallo [smartreader] Provider: 1 SharedAddress: ########
2014/05/30 10:55:03 992FEE8 r Hallo [smartreader] found card system conax
2014/05/30 10:55:03 992FEE8 r Hallo [conax] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/05/30 10:55:03 992FEE8 r Hallo [conax] Package: 1, id: 1020, classes: 01000001, date: 2014/05/01 - 2014/05/31, name: Zone 2
2014/05/30 10:55:03 992FEE8 r Hallo [conax] Package: 2, id: 1020, classes: 01000001, date: 2014/04/01 - 2014/04/30, name: Zone 2
2014/05/30 10:55:03 992FEE8 r Hallo [conax] ready for requests
2014/05/30 10:55:04 0 s init for all local cards done
2014/05/30 10:55:04 9959400 c anonymous disconnected from xxxxxxxxx
2014/05/30 10:55:04 9957738 c anonymous disconnected from xxxxxxxxxx
2014/05/30 10:55:04 995B0C8 c anonymous disconnected from xxxxxxxxxx
2014/05/30 10:55:04 995CD90 c anonymous disconnected from xxxxxxxxx
2014/05/30 10:55:04 995EAE8 c anonymous disconnected from xxxxxxxxxxxx
2014/05/30 10:55:04 9960840 c encrypted cccam-clientxxxxxxxxxxx
2014/05/30 10:55:04 9962598 c encrypted cccam-client xxxxxxxxxxxxxx
2014/05/30 10:55:14 996FC50 c encrypted cccam-client 1xxxxxxxxxx)
2014/05/30 10:55:14 9972B60 c encrypted cccam-client xxxxxxxxxxxxxxxxxxxxxxxx
2014/05/30 10:55:14 9975A70 c encrypted cccam-client xxxxxxxxxxxxxxxxxxxxxxxxx
2014/05/30 10:55:14 9978980 c encrypted cccam-client xxxxxxxxxxxxxxxxxxxxxxxxxxx
2014/05/30 10:55:14 997C098 c encrypted cccam-client xxxxxxxxxxxxxxxxxxxxxxxx

CONFIG

Spoiler

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r1045
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
logfile = /var/log/ipc/OScam.log
disableuserfile = 0
usrfileflag = 1
clientmaxidle = 150
maxlogsize = 2480
usrfile = /var/log/ipc/user.log

[cache]

[cccam]
port = 23444
nodeid = B96D889A107C1508
version = 2.3.0
reshare = -1
reshare_mode = 0

[webif]
httpport = 16002
httpuser = oscam
httppwd = oscam
httptpl = /var/picons
httphelplang = de
http_prepend_embedded_css = 1
httprefresh = 15
httppollrefresh = 15
httphideidleclients = 1
httpshowpicons = 1
httpshowloadinfo = 1
httpallowed = 1.0.0.1,0.0.0.0-192.168.178.255

SERVER

Spoiler

[reader]
label = V14
protocol = pcsc
device = 0
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-g = 1
ndsversion = 2

[reader]
label = Hallo
protocol = smartreader
device = 004:002
caid = 0B02
detect = cd
mhz = 534
cardmhz = 600
group = 2

[reader]
label = camd3emu
protocol = cs357x
device = 127.0.0.1,12345
user = meinserver
password = meinserverpass
caid = 0D05
group = 3
audisabled = 1

USER

Spoiler

[account]
user = Wexxxxx
pwd = xxxxx
au = V14
group = 1,2,3
cccmaxhops = 2
cccreshare = 0

Danke

 

[Alex]

AW: Alles dunkel obwohl user connectet

Was läuft den für eine CAM auf den Clients?
Laut Log machen die Clients ja keine Anfragen

 

[schallas]

AW: Alles dunkel obwohl user connectet

Hi al-x83

Die user laufen mit cccam.

Gruß

 

[bombadil]

AW: Alles dunkel obwohl user connectet

Hi,

im Log stellt kein User eine Anfrage. Sollte doch zumindest davon ein Log erscheinen, connected sind sie ja.

Grüße
Bombadil

 

[waves]

AW: Alles dunkel obwohl user connectet

Schalte mal auf Debug Level 6, gehe dann auf einen Sky Kanal und suche im Log nach "Decrypted Payload".
Da sind dann einige Zahlenreihen. Suche hier mal nach 06 00, und erzähl uns mal, was danach kommt.
Ob 06 00 10 oder 06 00 00.

Da bei Dir im Reader außer den Globalen keine weiteren EMM's geblockt werden, ist das erstmal das interessanteste.

 

[schallas]

AW: Alles dunkel obwohl user connectet

Hi waves

kann den level ja nur auf 1,2,4,8,16,32 usw stellen, 6 ist nicht dabei....
oder verstehe ich jetzt was falsch !!

Gruß

 

[waves]

AW: Alles dunkel obwohl user connectet

einfach 2 und 4 drücken.

 

[schallas]

AW: Alles dunkel obwohl user connectet

Hi

Habe 2 und 4 gedrückt und auf s..y News HD geschaltet,

Das erscheint im log, mehr nicht...
2014/05/30 11:32:17 992E220 r V14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/05/30 11:32:18 992FEE8 r Hallo [conax] cardreader_do_checkhealth: reader->card_status = 2, ret = 1

Das ist alles

Gruß

 

[waves]

AW: Alles dunkel obwohl user connectet

Das wäre aber mehr als seltsam, wenn da nicht mehr erscheint....dann würde ja gar kein Zugriff erfolgen, und das kann ich mir nicht vorstellen, da Deine Clients ja connected sind.

 

[schallas]

AW: Alles dunkel obwohl user connectet

Hi

Mehr kommt da nicht, immer das gleiche
2014/05/30 11:39:57 992FEE8 r Hallo [conax] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/05/30 11:39:57 992E220 r V14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/05/30 11:39:58 992FEE8 r Hallo [conax] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/05/30 11:39:58 992E220 r V14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/05/30 11:39:59 992FEE8 r Hallo [conax] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/05/30 11:39:59 992E220 r V14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/05/30 11:40:00 992FEE8 r Hallo [conax] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/05/30 11:40:00 992E220 r V14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/05/30 11:40:01 0 --- Skipped 1 duplicated log lines ---
2014/05/30 11:40:01 992FEE8 r Hallo [conax] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/05/30 11:40:02 0 --- Skipped 1 duplicated log lines ---
2014/05/30 11:40:02 992E220 r V14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/05/30 11:40:03 992FEE8 r Hallo [conax] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/05/30 11:40:03 992E220 r V14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1

Gruß

 

[waves]

AW: Alles dunkel obwohl user connectet

Dann wird Dir im WebIf auf der Startseite auch kein Client angezeigt, oder?

 

[schallas]

AW: Alles dunkel obwohl user connectet

Hi

ja genau... kein user zu sehen!

gruß

 

[waves]

AW: Alles dunkel obwohl user connectet

Und vorher lief alles mit der Konfiguration?
Wenn ja, würde ich erstmal alles neu starten, auch den Router....im Prinzip alles was mit dem Netzwerkverkehr zu tun hat.

 

[schallas]

AW: Alles dunkel obwohl user connectet

Habe heute morgen einen cccam proxi hinzu gefügt, oscam neu gestartet und seit dem habe ich den Fehler.
Habe den proxy aber wieder entfernt.
Habe an den configs nichts geändert.

Gerade alles neu gestartet, Fritte und Igel, der Fehler bleibt.

Gruß

 

[waves]

AW: Alles dunkel obwohl user connectet

Dann wechsele erstmal wieder auf eine aktuellere Oscam Version.....so ab r96xx würde ich empfehlen, dann schauen wir nochmal weiter.