7port aktiv hab wird nicht erkannt

[tureon]

guten tag

hab ein kleines problem mit meinem aktiv hub.

und zwar wird der aufm qnap erkannt mit den 2 smargos drin aber im rasp garnicht. passiv hub geht einwandfrei.

woran kann das liegen?

 

[Derek Buegel]

AW: 7port aktiv hab wird nicht erkannt

Liegt am HUB, der RPI ist etwas wählerisch. Viele haben gute Erfahrungen mit König-HUB.

MfG

 

[tureon]

AW: 7port aktiv hab wird nicht erkannt

toll. wieder neuen kaufen

aber danke dir

 

[Alex]

AW: 7port aktiv hab wird nicht erkannt

Versuch mal noch USB 1.1, bevor du dir einen neuen kaufst: #2

 

[tureon]

AW: 7port aktiv hab wird nicht erkannt

die komplette zeile neu einfügen?

weil meine schaut so aus

dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait

 

[Alex]

AW: 7port aktiv hab wird nicht erkannt

Ja genau. Die bestehende ersetzen

 

[tureon]

AW: 7port aktiv hab wird nicht erkannt

hat geklappt. super danke dir

könnte es auch daran liegen das oscam ca alle 2 tage abkackt?

hab den neuen raspi 2 mit 15 proxies oder ist das zu viel?

 

[Alex]

AW: 7port aktiv hab wird nicht erkannt

Dazu kann ich ohne Log nichts sagen

 

[tureon]

AW: 7port aktiv hab wird nicht erkannt

Dann werd ich jetzt mal mit logen. Mal schauen danke

 

[tureon]

AW: 7port aktiv hab wird nicht erkannt

hier mal ein log vom absturz

.log

Spoiler

2015/03/13 01:54:49 76A3E680 c XXXXXXX (09C7&000000/0024/C352/60:555C7913EFDA350D9549D0112546D912): found (59 ms) by KabelDeutschland - TNT Film HD
2015/03/13 01:54:52 76A3E680 c XXXXXXX (09C7&000000/0020/C357/60:4431236436CACABDFA9D450390A45F06): found (59 ms) by KabelDeutschland - FOX HD
2015/03/13 01:54:52 76A4C060 c XXXXXXX (09C7&000000/001A/C35D/5E:873397B6E8A08740FEEFBA821CA8F55B): found (59 ms) by KabelDeutschland (L/1/2/2) - VOX HD
2015/03/13 01:54:52 76A45B20 c XXXXXXX (09C7&000000/001A/C35D/5E:873397B6E8A08740FEEFBA821CA8F55B): cache2 (50 ms) by KabelDeutschland (L/1/2/2) - VOX HD
2015/03/13 01:54:52 76A3E680 c XXXXXXX (09C7&000000/0027/C35F/5E:C865269E65C9C30A3B52C6129F159072): found (57 ms) by KabelDeutschland (L/1/2/2) - ProSieben HD
2015/03/13 01:54:52 76A84CA0 c XXXXXXX (09C7&000000/0030/C364/60:F9150FD312C577709BC6FEF2CC346C05): found (58 ms) by KabelDeutschland - Romance TV HD
2015/03/13 01:54:55 76A3C958 c XXXXXXX (09C7&000000/0061/C382/5E:2890FBABB46B9B19E4C6683948B4BE94): found (59 ms) by KabelDeutschland (L/1/2/2) - COMEDY CENTRAL HD/VIVA HD
2015/03/13 01:54:59 76A3E680 c XXXXXXX (09C7&000000/0024/C352/60:183BD789EC8272EB59C0CA0E91824E76): found (58 ms) by KabelDeutschland - TNT Film HD
2015/03/13 01:55:02 76A3E680 c XXXXXXX (09C7&000000/0020/C357/60:BBAAC247B72C1829D2D3AD6F5D54B523): found (59 ms) by KabelDeutschland - FOX HD
2015/03/13 01:55:02 76A4C060 c XXXXXXX (09C7&000000/001A/C35D/5E:A533C45B05EBD502E41E12D7AE60CBDF): found (60 ms) by KabelDeutschland (L/1/2/2) - VOX HD
2015/03/13 01:55:02 76A45B20 c XXXXXXX (09C7&000000/001A/C35D/5E:A533C45B05EBD502E41E12D7AE60CBDF): cache2 (50 ms) by KabelDeutschland (L/1/2/2) - VOX HD
2015/03/13 01:55:02 76A3E680 c XXXXXXX (09C7&000000/0027/C35F/5E:739DF10FDDDFF03EBE24AF2CD83488B8): found (57 ms) by KabelDeutschland (L/1/2/2) - ProSieben HD

2015/03/13 01:55:02 15E1910 r KabelDeutschland [videoguard2] classD1 ins40: (-2) status not ok 5e 8f
2015/03/13 01:55:02 15E1910 r KabelDeutschland [videoguard2] The card is not answering correctly! Restarting reader for safety
2015/03/13 01:55:02 76A84CA0 c XXXXXXX (09C7&000000/0030/C364/60:2EC383E68457E7F1DC3DE48FD7A1126F): not found (202 ms) by KabelDeutschland - Romance TV HD
2015/03/13 01:55:03 15E1910 r KabelDeutschland [videoguard2] SR: smartreader closed
2015/03/13 01:55:03 15E1910 r KabelDeutschland [videoguard2] creating thread for device 001:005


-------------------------------------------------------------------------------
>> OSCam << cardserver started at Fri Mar 13 01:56:01 2015
-------------------------------------------------------------------------------
2015/03/13 01:56:01 0 s >> OSCam << cardserver started, version 1.20-modern_svn, build r1377 (arm-linux-gnueabihf)
2015/03/13 01:56:01 0 s System name = Linux
2015/03/13 01:56:01 0 s Host name = raspberrypi
2015/03/13 01:56:01 0 s Release = 3.18.7-v7+
2015/03/13 01:56:01 0 s Version = #755 SMP PREEMPT Thu Feb 12 17:20:48 GMT 2015
2015/03/13 01:56:01 0 s Machine = armv7l
2015/03/13 01:56:01 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 28399
2015/03/13 01:56:01 0 s couldn't open statistics file: /share/external/sdtb1/oscam/log/ipc/OScamuser.log
2015/03/13 01:56:01 0 s services reloaded: 0 services freed, 40 services loaded, rejected 0
2015/03/13 01:56:01 0 s userdb reloaded: 20 accounts loaded, 0 expired, 0 disabled
2015/03/13 01:56:01 0 s signal handling initialized
2015/03/13 01:56:01 0 s 675 service-id's loaded in 7 ms
2015/03/13 01:56:01 0 s 69 tier-id's loaded
2015/03/13 01:56:01 0 s 987 provid's loaded
2015/03/13 01:56:01 0 s cccam: initialized (fd=5, port=16005)
2015/03/13 01:56:01 0 s KabelDeutschland [smartreader] creating thread for device 001:005
2015/03/13 01:56:01 0 s hd02 [smartreader] creating thread for device 001:006
2015/03/13 01:56:01 1923DA8 h WARNING: Your http disk template /var/etc/picons/STATUS.tpl was created for an older revision of OSCam and was changed in original OSCam (1.20-unstable_svn,r9991). Please consider upgrading it!
2015/03/13 01:56:01 1923DA8 h If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;3297253049;1.20-modern_svn;1377;-->
2015/03/13 01:56:01 1923DA8 h WARNING: Your http disk template /var/etc/picons/CLIENTSTATUSBIT.tpl was created for an older revision of OSCam and was changed in original OSCam (1.20-unstable_svn,r9991). Please consider upgrading it!
2015/03/13 01:56:01 1923DA8 h If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;2474077894;1.20-modern_svn;1377;-->
2015/03/13 01:56:01 19A9B18 r KabelDeutschland [smartreader] Reader initialized (device=001:005, detect=cd, mhz= AUTO, cardmhz=369)
2015/03/13 01:56:01 1923DA8 h HTTP Server running. ip=0.0.0.0 port=8888
2015/03/13 01:56:02 19A9B18 r KabelDeutschland [smartreader] card detected
2015/03/13 01:56:02 19AB7B0 r hd02 [smartreader] card detected
2015/03/13 01:56:06 19A9B18 r KabelDeutschland [smartreader] ATR: 3F FD 15 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2015/03/13 01:56:06 19A9B18 r KabelDeutschland [smartreader] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/03/13 01:56:06 19A9B18 r KabelDeutschland [smartreader] Calculated work ETU is 4.35 us reader mhz = 534
2015/03/13 01:56:06 19A9B18 r KabelDeutschland [smartreader] Effective reader settings mhz =534 F= 372 D= 16 N=2 T=0 inv=1 parity=ODD
2015/03/13 01:56:06 19AB7B0 r hd02 [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2015/03/13 01:56:06 19AB7B0 r hd02 [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/03/13 01:56:06 19AB7B0 r hd02 [smartreader] Calculated work ETU is 5.99 us reader mhz = 534
2015/03/13 01:56:06 19AB7B0 r hd02 [smartreader] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
2015/03/13 01:56:06 19A9B18 r KabelDeutschland [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2015/03/13 01:56:07 19AB7B0 r hd02 [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2015/03/13 01:56:07 19AB7B0 r hd02 [smartreader] Card responded ok for ifsd request of 28
2015/03/13 01:56:07 19A9B18 r KabelDeutschland [smartreader] Card type: KLPV
2015/03/13 01:56:07 19A9B18 r KabelDeutschland [smartreader] Rom version: 10LM
2015/03/13 01:56:07 19A9B18 r KabelDeutschland [smartreader] Credit available on card: 0 euro
2015/03/13 01:56:07 19A9B18 r KabelDeutschland [smartreader] FuseByte: 25
2015/03/13 01:56:07 19A9B18 r KabelDeutschland [smartreader] Region Code: DEU00001
2015/03/13 01:56:07 19A9B18 r KabelDeutschland [smartreader] Country Code: DEU
2015/03/13 01:56:08 19A9B18 r KabelDeutschland [smartreader] Pincode read: 6819
2015/03/13 01:56:08 19A9B18 r KabelDeutschland [smartreader] PCB settings: FF FF FF FF
2015/03/13 01:56:08 19A9B18 r KabelDeutschland [smartreader] Parental control disabled
2015/03/13 01:56:08 19A9B18 r KabelDeutschland [smartreader] type: VideoGuard Kabel Deutschland G02/G09 (09C7), caid: 09C7
2015/03/13 01:56:08 19A9B18 r KabelDeutschland [smartreader] serial: ########, BoxID: ########, baseyear: 2004
2015/03/13 01:56:08 19A9B18 r KabelDeutschland [smartreader] ready for requests
2015/03/13 01:56:08 19A9B18 r KabelDeutschland [smartreader] found card system videoguard2
2015/03/13 01:56:08 19A9B18 r KabelDeutschland [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/03/13 01:56:08 19A9B18 r KabelDeutschland [videoguard2] card detected
2015/03/13 01:56:08 19A9B18 r KabelDeutschland [videoguard2] type: VideoGuard Kabel Deutschland G02/G09 (09C7)
2015/03/13 01:56:08 19A9B18 r KabelDeutschland [videoguard2] tier: 00f3, expiry date: 2015/05/11-01:00:00 Blue Movie Info
2015/03/13 01:56:08 19A9B18 r KabelDeutschland [videoguard2] tier: 00f4, expiry date: 2015/05/11-01:00:00 KD HOME
2015/03/13 01:56:08 19A9B18 r KabelDeutschland [videoguard2] tier: 00fa, expiry date: 2015/05/11-01:00:00 KD HOME
2015/03/13 01:56:08 19A9B18 r KabelDeutschland [videoguard2] tier: 00fe, expiry date: 2015/05/11-01:00:00 KD HOME
2015/03/13 01:56:08 19A9B18 r KabelDeutschland [videoguard2] tier: 0101, expiry date: 2015/05/11-01:00:00 KD Free
2015/03/13 01:56:08 19A9B18 r KabelDeutschland [videoguard2] tier: 0133, expiry date: 2015/05/11-01:00:00 KD Privat HD
2015/03/13 01:56:08 19AB7B0 r hd02 [smartreader] detect native nagra card
2015/03/13 01:56:08 19A9B18 r KabelDeutschland [videoguard2] tier: 0137, expiry date: 2015/05/11-01:00:00 KD Premium HD
2015/03/13 01:56:09 19AB7B0 r hd02 [smartreader] ready for requests
2015/03/13 01:56:09 19AB7B0 r hd02 [smartreader] found card system nagra
2015/03/13 01:56:09 19AB7B0 r hd02 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/03/13 01:56:09 19AB7B0 r hd02 [nagra] ROM: D N A S P 1 8 0
2015/03/13 01:56:09 19AB7B0 r hd02 [nagra] REV: M e r 0 0 0
2015/03/13 01:56:09 19AB7B0 r hd02 [nagra] SER: ############
2015/03/13 01:56:09 19AB7B0 r hd02 [nagra] CAID: 1843
2015/03/13 01:56:09 19AB7B0 r hd02 [nagra] Prv.ID: 00 00 34 11 (sysid)
2015/03/13 01:56:09 19AB7B0 r hd02 [nagra] Prv.ID: 00 00 00 00
2015/03/13 01:56:09 19AB7B0 r hd02 [nagra] IRD ID: ############
2015/03/13 01:56:09 19AB7B0 r hd02 [nagra] active to: 2015/05/03 12:59
2015/03/13 01:56:09 19AB7B0 r hd02 [nagra] -----------------------------------------
2015/03/13 01:56:09 19AB7B0 r hd02 [nagra] |id |tier |valid from |valid to |
2015/03/13 01:56:09 19AB7B0 r hd02 [nagra] +----+--------+------------+------------+
2015/03/13 01:56:09 19AB7B0 r hd02 [nagra] |8011|0066 |2010/12/24 |2011/12/26 |
2015/03/13 01:56:09 19AB7B0 r hd02 [nagra] |8011|0067 |2010/01/19 |2010/01/20 |
2015/03/13 01:56:09 19AB7B0 r hd02 [nagra] |8011|0BB8 |2015/02/07 |2015/03/30 |
2015/03/13 01:56:09 19AB7B0 r hd02 [nagra] |8011|0BEA |2014/01/24 |2015/03/01 |
2015/03/13 01:56:09 19AB7B0 r hd02 [nagra] -----------------------------------------
2015/03/13 01:56:10 0 s init for all local cards done

dann connecten alle user/proxies wieder

.conf

Spoiler

[global]
logfile = /var/log/ipc/OScam.log
disableuserfile = 0
fallbacktimeout = 2000
unlockparental = 1
nice = -1
maxlogsize = 10240
preferlocalcards = 2
dropdups = 1
block_same_ip = 0
block_same_name = 0
usrfile = /var/log/ipc/OScamuser.log
emmlogdir = /var/log/ipc/.oscam/
lb_mode = 1
lb_save = 120
lb_savepath = /var/log/ipc/.oscam/stat
failbantime = 9999
failbancount = 3


[cccam]
port = 16005
nodeid = 166A30F2100413EA
version = 2.3.0
reshare = 1
reshare_mode = 0
ignorereshare = 1
minimizecards = 1


[webif]
httpport = 8888
httpuser = xxxx
httppwd = xxxx
httpscript = /var/etc
httptpl = /var/etc/picons
httppiconpath = /var/etc/picons
httphelplang = de
httprefresh = 7
httphidetype = sh
httpshowpicons = 1
httppiconsize = 30
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 0.0.0.0-255.255.255.255
httpdyndns = xxxx.xxx.xxx
aulow = 120
httposcamlabel = Raspberry
http_status_log = 1

.server

Spoiler

[reader]
label = KabelDeutschland
protocol = smartreader
device = 001:005
smargopatch = 1
caid = 09C7
boxid = 12345678
ins7e11 = 15
fix07 = 0
ecmwhitelist = 09C7:5F,63,7A,64,60,5E,62
detect = cd
mhz = 534
cardmhz = 369
ident = 09C7:000000
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
lb_weight = 400
cccreshare = 1
ndsversion = 2


[reader]
label = hd02
protocol = smartreader
device = 001:006
smargopatch = 1
boxkey = Axxxx37C
rsakey = BFxxxxxx4DD5
fix07 = 0
ecmwhitelist = 1843:89
detect = cd
mhz = 534
cardmhz = 369
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-s = 1
lb_weight = 400
cccreshare = 1

benutze smargos

 

[Alex]

AW: 7port aktiv hab wird nicht erkannt

Der Smargo oder die Karte antwortet nicht mehr richtig, warum deshalb Oscam abstürzt? Keine Ahnung

 

[tureon]

AW: 7port aktiv hab wird nicht erkannt

reader settings passen oder? weil hab die so von meinem qnap übernommen