Digital Eliteboard - Das Digitale Technik Forum
Registriere dich noch heute kostenloses um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereiche, welche für Gäste verwehrt bleiben
magga40
Meister
- Registriert
- 13. Februar 2011
- Beiträge
- 707
- Reaktionspunkte
- 220
- Punkte
- 43
AW: Wie bekomme ich HD auf meine Dreambox 500 HD Kabel?
probier mal so aus
[reader]
Label = D02
Protocol = internal
Device = /dev/sci0
detect = CD
Group = 1
CAID = 1722,1834
EMMCache = 1,3,2
und statt AU = 0>>AU = 1 stellen
probier mal so aus
[reader]
Label = D02
Protocol = internal
Device = /dev/sci0
detect = CD
Group = 1
CAID = 1722,1834
EMMCache = 1,3,2
und statt AU = 0>>AU = 1 stellen
Zuletzt bearbeitet:
- Registriert
- 29. April 2008
- Beiträge
- 6.024
- Reaktionspunkte
- 5.735
- Punkte
- 373
AW: Wie bekomme ich HD auf meine Dreambox 500 HD Kabel?
Wenn CCcam VOR Oscam startet dann funzt es auch nicht es muss erst Oscam starten,achte mal darauf
AW: Wie bekomme ich HD auf meine Dreambox 500 HD Kabel?
hallo magga 40,
internal will er nicht.muss wieder auf mouse. warum kann ich device nicht öffnen?
2011/09/02 14:42:44 5AD188 s >> OSCam << cardserver started, version 1.20 -DEB-Freetz--Prof.Linux- , build #5781 (mipsel-router-linux-uclibc931)
2011/09/02 14:42:44 5AD188 s version=1.20 -DEB-Freetz--Prof.Linux- , build #5781, system=mipsel-router-linux, nice=-1
2011/09/02 14:42:44 5AD188 s client max. idle=120 sec, debug level=0
2011/09/02 14:42:44 5AD188 s max. logsize=2480 Kb, loghistorysize=4096 bytes
2011/09/02 14:42:44 5AD188 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2011/09/02 14:42:44 5AD188 s services reloaded: 0 services freed, 4 services loaded, rejected 0
2011/09/02 14:42:44 5AD188 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/09/02 14:42:44 5AD188 s signal handling initialized (type=sysv)
2011/09/02 14:42:44 5AD188 s 11590 service-id's loaded in 319ms
2011/09/02 14:42:44 5AD188 s WARNING: You risk high CPU load and high ECM times with more than 2000 service-id´s!
2011/09/02 14:42:44 5AD188 s HINT: --> use optimized lists from
2011/09/02 14:42:44 5AD188 s 116 tier-id's loaded
2011/09/02 14:42:44 5AD188 s 3 provid's loaded
2011/09/02 14:42:44 5AD188 s 22 lengths for caid guessing loaded
2011/09/02 14:42:44 5AD188 s monitor: initialized (fd=6, port=988)
2011/09/02 14:42:44 5AD188 s camd35: disabled
2011/09/02 14:42:44 5AD188 s cs378x: disabled
2011/09/02 14:42:44 5AD188 s newcamd: initialized (fd=7, port=34000, crypted)
2011/09/02 14:42:44 5AD188 s -> CAID: 1830 PROVID: 003411
2011/09/02 14:42:44 5AD188 s radegast: disabled
2011/09/02 14:42:44 6B2C08 h HTTP Server listening on port 83
2011/09/02 14:42:44 5AD188 s http thread started
2011/09/02 14:42:44 5AD188 s reader check thread started
2011/09/02 14:42:44 5AD188 s check thread started
2011/09/02 14:42:44 5AD188 s creating thread for device /dev/sci
2011/09/02 14:42:44 5AD188 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/09/02 14:42:44 5AD188 s waiting for local card init
2011/09/02 14:42:44 6B42E0 r ERROR, you have specified 'protocol = internal' in oscam.server,
2011/09/02 14:42:44 6B42E0 r recompile with internal reader support.
2011/09/02 14:42:44 6B42E0 r Cannot open device: /dev/sci
2011/09/02 14:43:44 6B42E0 r ERROR, you have specified 'protocol = internal' in oscam.server,
2011/09/02 14:43:44 6B42E0 r recompile with internal reader support.
2011/09/02 14:43:44 6B42E0 r Cannot open device: /dev/sci
2011/09/02 14:44:44 6B42E0 r ERROR, you have specified 'protocol = internal' in oscam.server,
2011/09/02 14:44:44 6B42E0 r recompile with internal reader support.
2011/09/02 14:44:44 6B42E0 r Cannot open device: /dev/sci
2011/09/02 14:45:44 6B42E0 r ERROR, you have specified 'protocol = internal' in oscam.server,
2011/09/02 14:45:44 6B42E0 r recompile with internal reader support.
2011/09/02 14:45:44 6B42E0 r Cannot open device: /dev/sci
2011/09/02 14:46:44 6B42E0 r ERROR, you have specified 'protocol = internal' in oscam.server,
2011/09/02 14:46:44 6B42E0 r recompile with internal reader support.
2011/09/02 14:46:44 6B42E0 r Cannot open device: /dev/sci
hallo magga 40,
internal will er nicht.muss wieder auf mouse. warum kann ich device nicht öffnen?
2011/09/02 14:42:44 5AD188 s >> OSCam << cardserver started, version 1.20 -DEB-Freetz--Prof.Linux- , build #5781 (mipsel-router-linux-uclibc931)
2011/09/02 14:42:44 5AD188 s version=1.20 -DEB-Freetz--Prof.Linux- , build #5781, system=mipsel-router-linux, nice=-1
2011/09/02 14:42:44 5AD188 s client max. idle=120 sec, debug level=0
2011/09/02 14:42:44 5AD188 s max. logsize=2480 Kb, loghistorysize=4096 bytes
2011/09/02 14:42:44 5AD188 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2011/09/02 14:42:44 5AD188 s services reloaded: 0 services freed, 4 services loaded, rejected 0
2011/09/02 14:42:44 5AD188 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/09/02 14:42:44 5AD188 s signal handling initialized (type=sysv)
2011/09/02 14:42:44 5AD188 s 11590 service-id's loaded in 319ms
2011/09/02 14:42:44 5AD188 s WARNING: You risk high CPU load and high ECM times with more than 2000 service-id´s!
2011/09/02 14:42:44 5AD188 s HINT: --> use optimized lists from
Du musst dich
Anmelden
oder
Registrieren
um diesen link zusehen!
2011/09/02 14:42:44 5AD188 s 116 tier-id's loaded
2011/09/02 14:42:44 5AD188 s 3 provid's loaded
2011/09/02 14:42:44 5AD188 s 22 lengths for caid guessing loaded
2011/09/02 14:42:44 5AD188 s monitor: initialized (fd=6, port=988)
2011/09/02 14:42:44 5AD188 s camd35: disabled
2011/09/02 14:42:44 5AD188 s cs378x: disabled
2011/09/02 14:42:44 5AD188 s newcamd: initialized (fd=7, port=34000, crypted)
2011/09/02 14:42:44 5AD188 s -> CAID: 1830 PROVID: 003411
2011/09/02 14:42:44 5AD188 s radegast: disabled
2011/09/02 14:42:44 6B2C08 h HTTP Server listening on port 83
2011/09/02 14:42:44 5AD188 s http thread started
2011/09/02 14:42:44 5AD188 s reader check thread started
2011/09/02 14:42:44 5AD188 s check thread started
2011/09/02 14:42:44 5AD188 s creating thread for device /dev/sci
2011/09/02 14:42:44 5AD188 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/09/02 14:42:44 5AD188 s waiting for local card init
2011/09/02 14:42:44 6B42E0 r ERROR, you have specified 'protocol = internal' in oscam.server,
2011/09/02 14:42:44 6B42E0 r recompile with internal reader support.
2011/09/02 14:42:44 6B42E0 r Cannot open device: /dev/sci
2011/09/02 14:43:44 6B42E0 r ERROR, you have specified 'protocol = internal' in oscam.server,
2011/09/02 14:43:44 6B42E0 r recompile with internal reader support.
2011/09/02 14:43:44 6B42E0 r Cannot open device: /dev/sci
2011/09/02 14:44:44 6B42E0 r ERROR, you have specified 'protocol = internal' in oscam.server,
2011/09/02 14:44:44 6B42E0 r recompile with internal reader support.
2011/09/02 14:44:44 6B42E0 r Cannot open device: /dev/sci
2011/09/02 14:45:44 6B42E0 r ERROR, you have specified 'protocol = internal' in oscam.server,
2011/09/02 14:45:44 6B42E0 r recompile with internal reader support.
2011/09/02 14:45:44 6B42E0 r Cannot open device: /dev/sci
2011/09/02 14:46:44 6B42E0 r ERROR, you have specified 'protocol = internal' in oscam.server,
2011/09/02 14:46:44 6B42E0 r recompile with internal reader support.
2011/09/02 14:46:44 6B42E0 r Cannot open device: /dev/sci
Jetzt viele änderungen:
Oscam Config:
[global]
logfile = /var/media/ftp/uStor01/OScam.log
disablelog = 0
disableuserfile = 0
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 2480
waitforcards = 1
preferlocalcards = 0
saveinithistory = 1
readerrestartseconds = 5
resolvegethostbyname = 0
[monitor]
port = 988
nocrypt = 192.168.178.1-192.168.255.255
aulow = 120
hideclient_to = 0
monlevel = 1
appendchaninfo = 1
# protocols
#[camd35]
#Port = 3333
[newcamd]
key = 0102030405060708091011121314
port = 34000@1834:003411
keepalive = 1
mgclient = 0
Oscam Server
[reader]
label = cccam
Protocol = cccam
detect = CD
device = xxxxxxx.dyndns.org,12000
group = 2
CAID = 1722,1834
emmcache = 1,1,2
rsakey = ....4DD5
boxkey = A7..7C
mhz = 368
cardmhz = 368
service = HD
Oscam user
[account]
user = user
pwd = pass
group = 1
AU = 1
CAID = 1722,1834
IDENT = 1722,1834:003411,008011
[webif]
httpport = 83
httpcss = /var/media/ftp/uStor01//cs/oscam//proflinux_ddcstyle.css
httprefresh = 10
httpallowed = 127.0.0.1,192.168.178.1-192.168.255.255
httphideidleclients = 0
httpreadonly = 1
httpsavefullcfg = 0
mein webinterface
2011/09/02 19:15:29 5AD188 s >> OSCam << cardserver started, version 1.20 -DEB-Freetz--Prof.Linux- , build #5781 (mipsel-router-linux-uclibc931)
2011/09/02 19:15:29 5AD188 s version=1.20 -DEB-Freetz--Prof.Linux- , build #5781, system=mipsel-router-linux, nice=-1
2011/09/02 19:15:29 5AD188 s client max. idle=120 sec, debug level=0
2011/09/02 19:15:29 5AD188 s max. logsize=2480 Kb, loghistorysize=4096 bytes
2011/09/02 19:15:29 5AD188 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2011/09/02 19:15:29 5AD188 s services reloaded: 0 services freed, 4 services loaded, rejected 0
2011/09/02 19:15:29 5AD188 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/09/02 19:15:29 5AD188 s signal handling initialized (type=sysv)
2011/09/02 19:15:29 5AD188 s 11590 service-id's loaded in 338ms
2011/09/02 19:15:29 5AD188 s WARNING: You risk high CPU load and high ECM times with more than 2000 service-id´s!
2011/09/02 19:15:29 5AD188 s HINT: --> use optimized lists from
2011/09/02 19:15:29 5AD188 s 116 tier-id's loaded
2011/09/02 19:15:29 5AD188 s 3 provid's loaded
2011/09/02 19:15:29 5AD188 s 22 lengths for caid guessing loaded
2011/09/02 19:15:29 5AD188 s monitor: initialized (fd=6, port=988)
2011/09/02 19:15:29 5AD188 s camd35: disabled
2011/09/02 19:15:29 5AD188 s cs378x: disabled
2011/09/02 19:15:29 5AD188 s newcamd: initialized (fd=7, port=34000, crypted)
2011/09/02 19:15:29 5AD188 s -> CAID: 1834 PROVID: 003411
2011/09/02 19:15:29 5AD188 s radegast: disabled
2011/09/02 19:15:29 5AD188 s http thread started
2011/09/02 19:15:29 5AD188 s reader check thread started
2011/09/02 19:15:29 5AD188 s check thread started
2011/09/02 19:15:29 5AD188 s creating thread for device seremvpn.dyndns.org
2011/09/02 19:15:29 6B2C20 p cccam configuration error!
2011/09/02 19:15:29 6B2C20 p proxy cccam initialized (server=xxxxxxx.dyndns.org:12000)
2011/09/02 19:15:29 6B8128 h HTTP Server listening on port 83
2011/09/02 19:15:29 5AD188 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/09/02 19:15:29 5AD188 s waiting for local card init
2011/09/02 19:15:29 5AD188 s init for all local cards done
2011/09/02 19:15:32 6B9800 c client connected to 34000 port
2011/09/02 19:15:32 6B9800 c encrypted newcamd:34000-client 192.168.178.1 granted (user, au=auto (1 reader))
2011/09/02 19:15:32 6B9800 c user user authenticated successfully (CCcam)
2011/09/02 19:15:32 6B9800 c AU disabled for user user
2011/09/02 19:15:32 6B9800 c no valid PROVID(s) found in CAID for user 'metin'
2011/09/02 19:15:34 6BCEE8 c client connected to 34000 port
2011/09/02 19:15:34 6BCEE8 c encrypted newcamd:34000-client 192.168.178.34 granted (user, au=auto (1 reader))
2011/09/02 19:15:34 6BCEE8 c user user authenticated successfully (CCcam)
2011/09/02 19:15:34 6BCEE8 c AU disabled for user user
2011/09/02 19:15:34 6BCEE8 c no valid PROVID(s) found in CAID for user 'user'
2011/09/02 19:19:15 6B9800 c WARNING: invalid client tcp_conn_close()
2011/09/02 19:19:15 6B9800 c user disconnected from 192.168.178.1
2011/09/02 19:19:15 6B9800 c thread 7008 ended!
2011/09/02 19:19:17 6BCEE8 c user (1834&003411/002B/89:8D7D): rejected user ident (120 ms) (of 0 avail 0) - Sky Cinema +24 [N-D02 kab] (no card support 1834:003411)
2011/09/02 19:19:24 6BCEE8 c user (1834&003411/002B/89:763E): rejected user ident (120 ms) (of 0 avail 0) - Sky Cinema +24 [N-D02 kab] (no card support 1834:003411)
2011/09/02 19:19:31 6BCEE8 c user (1834&003411/002B/89:51C9): rejected user ident (137 ms) (of 0 avail 0) - Sky Cinema +24 [N-D02 kab] (no card support 1834:003411)
2011/09/02 19:19:38 6BCEE8 c user (1834&003411/002B/89:9060): rejected user ident (121 ms) (of 0 avail 0) - Sky Cinema +24 [N-D02 kab] (no card support 1834:003411)
2011/09/02 19:19:46 6BCEE8 c user (1834&003411/002B/89:4132): rejected user ident (121 ms) (of 0 avail 0) - Sky Cinema +24 [N-D02 kab] (no card support 1834:003411)
2011/09/02 19:19:50 6B9800 c client connected to 34000 port
2011/09/02 19:19:50 6B9800 c encrypted newcamd:34000-client 192.168.178.1 granted (user, au=auto (1 reader))
2011/09/02 19:19:50 6B9800 c user user authenticated successfully (CCcam)
2011/09/02 19:19:50 6B9800 c AU disabled for user user
2011/09/02 19:19:50 6B9800 c no valid PROVID(s) found in CAID for user 'user'
2011/09/02 19:19:53 6B9800 c user (1834&003411/002B/89
F15): rejected user ident (120 ms) (of 0 avail 0) - Sky Cinema +24 [N-D02 kab] (no card support 1834:003411)
2011/09/02 19:19:54 6BCEE8 c user (1834&003411/002B/89F15): rejected user ident (121 ms) (of 0 avail 0) - Sky Cinema +24 [N-D02 kab] (no card support 1834:003411)
wenn mir jemand weiterhelfen könnte, das wäre klasse.
ich habe mittlerweile 1000 verschiedene dinge gelesen.
im übrigen, wenn das steht:
2011/09/02 19:19:24 6BCEE8 c user (1834&003411/002B/89:763E): rejected user ident (120 ms) (of 0 avail 0) - Sky Cinema +24 [N-D02 kab] (no card support 1834:003411)
es funktioniert.
nur bei hd funktioniert es nicht.
Oscam Config:
[global]
logfile = /var/media/ftp/uStor01/OScam.log
disablelog = 0
disableuserfile = 0
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 2480
waitforcards = 1
preferlocalcards = 0
saveinithistory = 1
readerrestartseconds = 5
resolvegethostbyname = 0
[monitor]
port = 988
nocrypt = 192.168.178.1-192.168.255.255
aulow = 120
hideclient_to = 0
monlevel = 1
appendchaninfo = 1
# protocols
#[camd35]
#Port = 3333
[newcamd]
key = 0102030405060708091011121314
port = 34000@1834:003411
keepalive = 1
mgclient = 0
Oscam Server
[reader]
label = cccam
Protocol = cccam
detect = CD
device = xxxxxxx.dyndns.org,12000
group = 2
CAID = 1722,1834
emmcache = 1,1,2
rsakey = ....4DD5
boxkey = A7..7C
mhz = 368
cardmhz = 368
service = HD
Oscam user
[account]
user = user
pwd = pass
group = 1
AU = 1
CAID = 1722,1834
IDENT = 1722,1834:003411,008011
[webif]
httpport = 83
httpcss = /var/media/ftp/uStor01//cs/oscam//proflinux_ddcstyle.css
httprefresh = 10
httpallowed = 127.0.0.1,192.168.178.1-192.168.255.255
httphideidleclients = 0
httpreadonly = 1
httpsavefullcfg = 0
mein webinterface
2011/09/02 19:15:29 5AD188 s >> OSCam << cardserver started, version 1.20 -DEB-Freetz--Prof.Linux- , build #5781 (mipsel-router-linux-uclibc931)
2011/09/02 19:15:29 5AD188 s version=1.20 -DEB-Freetz--Prof.Linux- , build #5781, system=mipsel-router-linux, nice=-1
2011/09/02 19:15:29 5AD188 s client max. idle=120 sec, debug level=0
2011/09/02 19:15:29 5AD188 s max. logsize=2480 Kb, loghistorysize=4096 bytes
2011/09/02 19:15:29 5AD188 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2011/09/02 19:15:29 5AD188 s services reloaded: 0 services freed, 4 services loaded, rejected 0
2011/09/02 19:15:29 5AD188 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/09/02 19:15:29 5AD188 s signal handling initialized (type=sysv)
2011/09/02 19:15:29 5AD188 s 11590 service-id's loaded in 338ms
2011/09/02 19:15:29 5AD188 s WARNING: You risk high CPU load and high ECM times with more than 2000 service-id´s!
2011/09/02 19:15:29 5AD188 s HINT: --> use optimized lists from
Du musst dich
Anmelden
oder
Registrieren
um diesen link zusehen!
2011/09/02 19:15:29 5AD188 s 116 tier-id's loaded
2011/09/02 19:15:29 5AD188 s 3 provid's loaded
2011/09/02 19:15:29 5AD188 s 22 lengths for caid guessing loaded
2011/09/02 19:15:29 5AD188 s monitor: initialized (fd=6, port=988)
2011/09/02 19:15:29 5AD188 s camd35: disabled
2011/09/02 19:15:29 5AD188 s cs378x: disabled
2011/09/02 19:15:29 5AD188 s newcamd: initialized (fd=7, port=34000, crypted)
2011/09/02 19:15:29 5AD188 s -> CAID: 1834 PROVID: 003411
2011/09/02 19:15:29 5AD188 s radegast: disabled
2011/09/02 19:15:29 5AD188 s http thread started
2011/09/02 19:15:29 5AD188 s reader check thread started
2011/09/02 19:15:29 5AD188 s check thread started
2011/09/02 19:15:29 5AD188 s creating thread for device seremvpn.dyndns.org
2011/09/02 19:15:29 6B2C20 p cccam configuration error!
2011/09/02 19:15:29 6B2C20 p proxy cccam initialized (server=xxxxxxx.dyndns.org:12000)
2011/09/02 19:15:29 6B8128 h HTTP Server listening on port 83
2011/09/02 19:15:29 5AD188 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/09/02 19:15:29 5AD188 s waiting for local card init
2011/09/02 19:15:29 5AD188 s init for all local cards done
2011/09/02 19:15:32 6B9800 c client connected to 34000 port
2011/09/02 19:15:32 6B9800 c encrypted newcamd:34000-client 192.168.178.1 granted (user, au=auto (1 reader))
2011/09/02 19:15:32 6B9800 c user user authenticated successfully (CCcam)
2011/09/02 19:15:32 6B9800 c AU disabled for user user
2011/09/02 19:15:32 6B9800 c no valid PROVID(s) found in CAID for user 'metin'
2011/09/02 19:15:34 6BCEE8 c client connected to 34000 port
2011/09/02 19:15:34 6BCEE8 c encrypted newcamd:34000-client 192.168.178.34 granted (user, au=auto (1 reader))
2011/09/02 19:15:34 6BCEE8 c user user authenticated successfully (CCcam)
2011/09/02 19:15:34 6BCEE8 c AU disabled for user user
2011/09/02 19:15:34 6BCEE8 c no valid PROVID(s) found in CAID for user 'user'
2011/09/02 19:19:15 6B9800 c WARNING: invalid client tcp_conn_close()
2011/09/02 19:19:15 6B9800 c user disconnected from 192.168.178.1
2011/09/02 19:19:15 6B9800 c thread 7008 ended!
2011/09/02 19:19:17 6BCEE8 c user (1834&003411/002B/89:8D7D): rejected user ident (120 ms) (of 0 avail 0) - Sky Cinema +24 [N-D02 kab] (no card support 1834:003411)
2011/09/02 19:19:24 6BCEE8 c user (1834&003411/002B/89:763E): rejected user ident (120 ms) (of 0 avail 0) - Sky Cinema +24 [N-D02 kab] (no card support 1834:003411)
2011/09/02 19:19:31 6BCEE8 c user (1834&003411/002B/89:51C9): rejected user ident (137 ms) (of 0 avail 0) - Sky Cinema +24 [N-D02 kab] (no card support 1834:003411)
2011/09/02 19:19:38 6BCEE8 c user (1834&003411/002B/89:9060): rejected user ident (121 ms) (of 0 avail 0) - Sky Cinema +24 [N-D02 kab] (no card support 1834:003411)
2011/09/02 19:19:46 6BCEE8 c user (1834&003411/002B/89:4132): rejected user ident (121 ms) (of 0 avail 0) - Sky Cinema +24 [N-D02 kab] (no card support 1834:003411)
2011/09/02 19:19:50 6B9800 c client connected to 34000 port
2011/09/02 19:19:50 6B9800 c encrypted newcamd:34000-client 192.168.178.1 granted (user, au=auto (1 reader))
2011/09/02 19:19:50 6B9800 c user user authenticated successfully (CCcam)
2011/09/02 19:19:50 6B9800 c AU disabled for user user
2011/09/02 19:19:50 6B9800 c no valid PROVID(s) found in CAID for user 'user'
2011/09/02 19:19:53 6B9800 c user (1834&003411/002B/89
F15): rejected user ident (120 ms) (of 0 avail 0) - Sky Cinema +24 [N-D02 kab] (no card support 1834:003411) 2011/09/02 19:19:54 6BCEE8 c user (1834&003411/002B/89
F15): rejected user ident (121 ms) (of 0 avail 0) - Sky Cinema +24 [N-D02 kab] (no card support 1834:003411)wenn mir jemand weiterhelfen könnte, das wäre klasse.
ich habe mittlerweile 1000 verschiedene dinge gelesen.
im übrigen, wenn das steht:
2011/09/02 19:19:24 6BCEE8 c user (1834&003411/002B/89:763E): rejected user ident (120 ms) (of 0 avail 0) - Sky Cinema +24 [N-D02 kab] (no card support 1834:003411)
es funktioniert.
nur bei hd funktioniert es nicht.
Zuletzt bearbeitet von einem Moderator:
AW: Wie bekomme ich HD auf meine Dreambox 500 HD Kabel?
2011/09/02 19:19:24 6BCEE8 c user (1834&003411/002B/89:763E): rejected user ident (120 ms) (of 0 avail 0) - Sky Cinema +24 [N-D02 kab] (no card support 1834:003411)
Das heißt, dass der User nicht darf ^^
änder mal unter
[reader]
group = 2 auf 1
und starte OScam neu
2011/09/02 19:19:24 6BCEE8 c user (1834&003411/002B/89:763E): rejected user ident (120 ms) (of 0 avail 0) - Sky Cinema +24 [N-D02 kab] (no card support 1834:003411)
Das heißt, dass der User nicht darf ^^
änder mal unter
[reader]
group = 2 auf 1
und starte OScam neu
AW: Wie bekomme ich HD auf meine Dreambox 500 HD Kabel?
So,
nachdem ich fast verrückt geworden bin und meine Frau mich mehrmals verlassen wollte, habe ich es hinbekommen.
Leider war der Weg nicht so leicht.
als erstes hätte ich fast mein Fritz-box 7270 v2 geschrottet, nicht lief mehr.
dann habe ich die D02 in die Dreambox 500 gesteckt und alles bis auf HD hinbekommen.
configs eingestellt und Hd wurde hell.
Dann die Fritzbox geflasht mit freetz-devel-7076M und den Stick mittels software bestückt, es wurde auch wieder das cccam gefunden.
Dann die N-Line.
N: 127.0.0.1 34000 UserausF PassausF 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
Jetzt lief es immernoch nicht im Smargo.
Oscam Config.
[global]
pidfile = /var/run/oscam.pid
usrfile = /var/log/oscamuser.log
logfile = /var/log/oscam.log
cwlogdir = /var/log/cw.log
usrfileflag = 0
clienttimeout = 7
fallbacktimeout = 5
clientmaxidle = 120
cachedelay = 300
bindwait = 120
netprio = 0
resolvedelay = 30
unlockparental = 0
nice = -5
serialreadertimeout = 2500
maxlogsize = 2048
waitforcards = 1
preferlocalcards = 0
[newcamd]
Key = 0102030405060708091011121314
Port = 34000@1834:000000
Oscam Server.
[reader]
label = sky
protocol = cccam
device = xxx.dyndns.org,12000
account = UserausF,PassausF
group = 1
services = sky
detect = none
CAID = 1722,1834
cccversion = 2.1.4
cccbuild = 3165
n3_rsakey = BF............................................................5
n3_boxkey = A7................C
Oscam User.
[account]
user = UserausF (der User aus der F-Linie)
pwd = PassausF
disabled = 0
group = 1
uniq = 0
sleep = 0
monlevel = 0
services = skyhd-mapping
caid = 1834
Betatunnel = 1834.FFFF:1722
ident = 1834:000000
keepalive = 0
numusers = 0
penalty = 0
jetzt habe ich oscam abgestellt in freetz, was bedeutet, dass cccam es allein schafft. nur die oscam in der dream arbeitet.
bei Hilferufen helfe ich gern, es funktioniert mit hd im smargo über freetz als server. :emoticon-0167-beer:
So,
nachdem ich fast verrückt geworden bin und meine Frau mich mehrmals verlassen wollte
, habe ich es hinbekommen.Leider war der Weg nicht so leicht.
als erstes hätte ich fast mein Fritz-box 7270 v2 geschrottet, nicht lief mehr.
dann habe ich die D02 in die Dreambox 500 gesteckt und alles bis auf HD hinbekommen.
configs eingestellt und Hd wurde hell.
Dann die Fritzbox geflasht mit freetz-devel-7076M und den Stick mittels software bestückt, es wurde auch wieder das cccam gefunden.
Dann die N-Line.
N: 127.0.0.1 34000 UserausF PassausF 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
Jetzt lief es immernoch nicht im Smargo.
Oscam Config.
[global]
pidfile = /var/run/oscam.pid
usrfile = /var/log/oscamuser.log
logfile = /var/log/oscam.log
cwlogdir = /var/log/cw.log
usrfileflag = 0
clienttimeout = 7
fallbacktimeout = 5
clientmaxidle = 120
cachedelay = 300
bindwait = 120
netprio = 0
resolvedelay = 30
unlockparental = 0
nice = -5
serialreadertimeout = 2500
maxlogsize = 2048
waitforcards = 1
preferlocalcards = 0
[newcamd]
Key = 0102030405060708091011121314
Port = 34000@1834:000000
Oscam Server.
[reader]
label = sky
protocol = cccam
device = xxx.dyndns.org,12000
account = UserausF,PassausF
group = 1
services = sky
detect = none
CAID = 1722,1834
cccversion = 2.1.4
cccbuild = 3165
n3_rsakey = BF............................................................5
n3_boxkey = A7................C
Oscam User.
[account]
user = UserausF (der User aus der F-Linie)
pwd = PassausF
disabled = 0
group = 1
uniq = 0
sleep = 0
monlevel = 0
services = skyhd-mapping
caid = 1834
Betatunnel = 1834.FFFF:1722
ident = 1834:000000
keepalive = 0
numusers = 0
penalty = 0
jetzt habe ich oscam abgestellt in freetz, was bedeutet, dass cccam es allein schafft. nur die oscam in der dream arbeitet.
bei Hilferufen helfe ich gern, es funktioniert mit hd im smargo über freetz als server. :emoticon-0167-beer:
Ähnliche Themen
- Gesperrt
