1. Diese Seite verwendet Cookies. Wenn du dich weiterhin auf dieser Seite aufhältst, akzeptierst du unseren Einsatz von Cookies. Weitere Informationen

Unterschied von DM800 zur Fritz7170 mit Freetz!!!

Dieses Thema im Forum "Fritzbox Archiv" wurde erstellt von nancy, 27. Juni 2010.

  1. nancy
    Offline

    nancy Ist gelegentlich hier

    Registriert:
    5. September 2009
    Beiträge:
    49
    Zustimmungen:
    3
    Punkte für Erfolge:
    0
    Hallo!

    habe mal eine bescheidene Frage!
    Blicke hier mal wieder nicht durch!!!

    Habe ein bestehendes CS mit Freetz, 2 Smargos SKY HD & HD+.

    Alles läuft über OSCAM und CCCAM sehr stabil!

    Jetzt habe ich testweise einen Baugleiche Fritz7170 mit dem selben Freetz und den selben USB Stick daten des bestehenden System genommen und die OSCAM Configs + CCCAM Config für eine NDS Telecolumbus Karte umgeschrieben! Die Config gabs hier im Board!

    hier die configs..

    CCCAM.CFG

    Code:
    N: 127.0.0.1 34000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 
    
    F: user test
    
    SERVER LISTEN PORT : 33538
    
    SOFTKEY FILE : /var/media/ftp/uStor01/cs/cccam/SoftCam.Key
    AUTOROLL FILE : /var/media/ftp/uStor01/cs/cccam/AutoRoll.Key
    STATIC CW FILE : /var/media/ftp/uStor01/cs/cccam/constant.cw
    CAID PRIO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.prio
    PROVIDERINFO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.providers
    CHANNELINFO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.channelinfo
    
    # SERIAL READER: /dev/ttyUSB0 smartreader+
    # SERIAL READER: /dev/ttyUSB1 smartreader+
    # SERIAL READER: /dev/ttyUSB1 smartreader+
    
    WEBINFO USERNAME : cccam
    WEBINFO PASSWORD : cccam
    
    WEBINFO LISTEN PORT : 16001
    MINIMUM DOWNHOPS: 1
    
    DEBUG: yes 
    SHOW TIMING: yes
    
    EXTRA EMM LEVEL : yes
    
    OSCAM.CONF

    OSCAM.CONF
    Code:
    # oscam.conf generated automatically by Streamboard OSCAM 0.99.4svn build #2330
    # Read more: http://streamboard.gmc.to/oscam/browser/trunk/Distribution/doc/txt/oscam.conf.txt
    
    [global]
    logfile             = stdout
    disablelog          = 0
    disableuserfile     = 0
    usrfileflag         = 0
    clienttimeout       = 5000
    fallbacktimeout     = 2500
    clientmaxidle       = 120
    cachedelay          = 120
    bindwait            = 120
    netprio             = 0
    clientdyndns        = 0
    resolvedelay        = 30
    unlockparental      = 0
    nice                = -1
    serialreadertimeout = 1500
    maxlogsize          = 10
    waitforcards        = 1
    preferlocalcards    = 1
    saveinithistory     = 1
    readerrestartseconds= 5
    
    [newcamd]
    port                = 34000@09AF:000000
    key                 = 0102030405060708091011121314
    allowed             = 
    keepalive           = 1
    mgclient            = 0
    
    [webif]
    httpport            = 16666
    httpuser            = oscam
    httppwd             = oscam
    httpcss             = 
    httptpl             = 
    httpscript          = 
    httprefresh         = 5
    httpallowed         = 127.0.0.1,192.168.0.0-192.168.255.255
    httpdyndns          = 
    httphideidleclients = 0
    httpreadonly        = 0
    
    
    OSCAM.SERVER
    Code:
    [reader]
    Label = KabelKiosk
    Protocol = mouse
    device = /dev/ttyUSB0
    MHz = 357
    Cardmhz = 357
    Group = 1
    Detect = CD
    BoxID = 12345678
    EMMCache = 1,3,2
    
    OSCAM.USER
    Code:
    [account]
    User = user
    Pwd = pass
    group = 1
    caid = 09af
    ident = 09af:000000
    AU = KabelKiosk
    monlevel = 4 
    HIER die OSCAM LOG


    Code:
    2010/06/27 13:43:36   1408 s   >> OSCam <<  cardserver started version 0.99.4svn, build #2330 (mips-tuxbox-linux)
    2010/06/27 13:43:36   1408 s   version=0.99.4svn, build #2330, system=mips-tuxbox-linux, nice=-1
    2010/06/27 13:43:36   1408 s   max. clients=29, client max. idle=120 sec
    2010/06/27 13:43:36   1408 s   max. logsize=unlimited
    2010/06/27 13:43:36   1408 s   client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
    2010/06/27 13:43:36   1408 s   shared memory initialized (size=492638, fd=3)
    2010/06/27 13:43:36   1408 s   auth size=4756
    2010/06/27 13:43:36   1408 s   services reloaded: 0 services freed, 4 services loaded
    2010/06/27 13:43:36   1408 s   userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
    2010/06/27 13:43:36   1408 s   signal handling initialized (type=sysv)
    2010/06/27 13:43:38   1408 s   10900 service-id's loaded
    2010/06/27 13:43:38   1408 s   1 provid's loaded
    2010/06/27 13:43:39   1408 s   22 lengths for caid guessing loaded
    2010/06/27 13:43:39   1408 s   monitor: disabled
    2010/06/27 13:43:39   1408 s   camd 3.3x: disabled
    2010/06/27 13:43:39   1408 s   camd 3.5x: disabled
    2010/06/27 13:43:39   1408 s   cs378x: disabled
    2010/06/27 13:43:39   1408 s   newcamd: initialized (fd=6, port=34000, crypted)
    2010/06/27 13:43:39   1408 s   CAID: 09AF
    2010/06/27 13:43:39   1408 s   provid #0: 000000
    2010/06/27 13:43:39   1408 s   cccam: disabled
    2010/06/27 13:43:39   1408 s   radegast: disabled
    2010/06/27 13:43:39   1408 s   logger started (pid=1415)
    2010/06/27 13:43:39   1408 s   resolver thread started
    2010/06/27 13:43:39   1408 s   http started (pid=1418)
    2010/06/27 13:43:39   1408 s   reader started (pid=1419, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
    2010/06/27 13:43:39   1408 s   waiting for local card init
    2010/06/27 13:43:40   1418 h   HTTP Server listening on port 16666
    2010/06/27 13:43:42   1408 s   init for all local cards done
    2010/06/27 13:43:42   1408 s   anti cascading disabled
    2010/06/27 13:43:42   1408 s   dvbapi disabled
    2010/06/27 13:43:43   1419 r02 card detected
    2010/06/27 13:43:50   1419 r02 ATR: XX XX XX XX XX XX XX ...
    2010/06/27 13:43:54   1419 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
    2010/06/27 13:43:54   1408 s   client(1) connect from 127.0.0.1 (pid=1422, pipfd=14)
    2010/06/27 13:43:55   1419 r02 card system not supported
    2010/06/27 13:43:55   1419 r02 Normal mode failed, reverting to Deprecated Mode
    2010/06/27 13:43:56   1422 c01 encrypted newcamd:34000-client 127.0.0.1 granted (user, au=kabelkiosk)
    2010/06/27 13:43:56   1422 c01 user user authenticated successfully (CCcam)
    2010/06/27 13:43:56   1422 c01 AU wont be used on this port -> disable AU
    2010/06/27 13:44:02   1419 r02 ATR: XX XX XX XX XX XX XX ... 
    2010/06/27 13:44:03   1419 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
    2010/06/27 13:44:04   1419 r02 card system not supported
    2010/06/27 13:44:04   1419 r02 card initializing error
    2010/06/27 13:44:04   1408 s   client(1) connect from 127.0.0.1 (pid=1424, pipfd=14)
    2010/06/27 13:44:04   1424 c01 encrypted newcamd:34000-client 127.0.0.1 granted (user, au=kabelkiosk)
    2010/06/27 13:44:04   1424 c01 user user authenticated successfully (CCcam)
    2010/06/27 13:44:04   1424 c01 AU wont be used on this port -> disable AU
    2010/06/27 13:44:07   1424 c01 user (09AF&000000/00D0/4B:2C97): not found (296 ms)
    2010/06/27 13:44:16   1424 c01 user (09AF&000000/00D0/4B:0323): not found (3 ms)
    2010/06/27 13:44:26   1424 c01 user (09AF&000000/00D0/4B:FF2C): not found (5 ms)
    2010/06/27 13:44:36   1424 c01 user (09AF&000000/00D0/4B:E1B7): not found (4 ms)
    
    Wie ihr sieht, geht es nicht.
    In der Dreambox komischer Weise wird die Karte erkannt!

    Obwohl ich dort die selben Configs genommen habe, wie von der FritzBox!!

    Hier die Configs:

    CCCAM.CFG
    Code:
    N: 127.0.0.1 34000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 
    OSCAM.CONF
    Code:
    # oscam.conf generated automatically by Streamboard OSCAM 0.99.4svn build #2330
    # Read more: http://streamboard.gmc.to/oscam/browser/trunk/Distribution/doc/txt/oscam.conf.txt
    
    [global]
    logfile             = stdout
    disablelog          = 0
    disableuserfile     = 0
    usrfileflag         = 0
    clienttimeout       = 5000
    fallbacktimeout     = 2500
    clientmaxidle       = 120
    cachedelay          = 120
    bindwait            = 120
    netprio             = 0
    clientdyndns        = 0
    resolvedelay        = 30
    unlockparental      = 0
    nice                = -1
    serialreadertimeout = 1500
    maxlogsize          = 10
    waitforcards        = 1
    preferlocalcards    = 1
    saveinithistory     = 1
    readerrestartseconds= 5
    
    [newcamd]
    port                = 34000@09AF:000000
    key                 = 0102030405060708091011121314
    allowed             = 
    keepalive           = 1
    mgclient            = 0
    
    [webif]
    httpport            = 16666
    httpuser            = oscam
    httppwd             = oscam
    httpcss             = 
    httptpl             = 
    httpscript          = 
    httprefresh         = 5
    httpallowed         = 127.0.0.1,192.168.0.0-192.168.255.255
    httpdyndns          = 
    httphideidleclients = 0
    httpreadonly        = 0
    
    
    OSCAM.SERVER
    Code:
    [reader]
    Label = KabelKiosk
    Protocol = internal
    device = /dev/sci0
    MHz = 357
    Cardmhz = 357
    Group = 1
    Detect = CD
    BoxID = 12345678
    EMMCache = 1,3,2 
    OSCAM.USER
    Code:
    [account]
    User = user
    Pwd = pass
    group = 1
    caid = 09af
    ident = 09af:000000
    AU = KabelKiosk
    monlevel = 4 
    Hier die OSCAM LOG

    Code:
                     2010/06/27 13:36:47   8006 s   cs378x: disabled 
    2010/06/27 13:36:47   8006 s   newcamd: initialized (fd=8, port=34000, crypted) 
    2010/06/27 13:36:47   8006 s   CAID: 09AF 
    2010/06/27 13:36:47   8006 s   provid #0: 000000 
    2010/06/27 13:36:47   8006 s   cccam: disabled 
    2010/06/27 13:36:47   8006 s   radegast: disabled 
    2010/06/27 13:36:47   8006 s   logger started (pid=8008) 
    2010/06/27 13:36:47   8006 s   resolver thread started 
    2010/06/27 13:36:47   8006 s   http started (pid=8010) 
    2010/06/27 13:36:47   8006 s   reader started (pid=8011, device=/dev/sci0) 
    2010/06/27 13:36:47   8006 s   waiting for local card init 
    2010/06/27 13:36:47   8010 h   HTTP Server listening on port 16666 
    2010/06/27 13:36:48   8011 r02 card detected 
    2010/06/27 13:36:49   8011 r02 ATR: XX XX XX XX XX XX XX ...
    2010/06/27 13:36:52   8011 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz 
    2010/06/27 13:36:53   8011 r02 [videoguard2-reader] type: VideoGuard, caid: 09AF, serial: 2FB92121, BoxID: 12345678 
    2010/06/27 13:36:53   8011 r02 [videoguard2-reader] ready for requests 
    2010/06/27 13:36:53   8011 r02 [videoguard2-reader] card detected 
    2010/06/27 13:36:53   8011 r02 [videoguard2-reader] type: VideoGuard 
    2010/06/27 13:36:53   8006 s   init for all local cards done 
    2010/06/27 13:36:53   8006 s   anti cascading disabled 
    2010/06/27 13:36:53   8006 s   dvbapi disabled 
    2010/06/27 13:37:03   8006 s   client(1) connect from 127.0.0.1 (pid=8043, pipfd=14) 
    2010/06/27 13:37:03   8043 c01 encrypted newcamd:34000-client 127.0.0.1 granted (user, au=kabelkiosk) 
    2010/06/27 13:37:03   8043 c01 user user authenticated successfully (CCcam) 
    2010/06/27 13:37:03   8043 c01 AU enabled for user user on reader kabelkiosk 
    2010/06/27 13:37:11   8043 c01 user (09AF&000000/00D0/4B:A637): found (83 ms) by kabelkiosk 
    Kann mir da jemand weiterhelfen???
     
    #1
  2. phantom

    Nervigen User Advertisement

  3. nancy
    Offline

    nancy Ist gelegentlich hier

    Registriert:
    5. September 2009
    Beiträge:
    49
    Zustimmungen:
    3
    Punkte für Erfolge:
    0
    AW: Unterschied von DM800 zur Fritz7170 mit Freetz!!!

    niemand ne idee??? :JC_hmmm::JC_hmmm::JC_hmmm:
     
    #2

Diese Seite empfehlen