1. Diese Seite verwendet Cookies. Wenn du dich weiterhin auf dieser Seite aufhältst, akzeptierst du unseren Einsatz von Cookies. Weitere Informationen

Problem mit Smargo und HD+ schwarze Karte. Bitte um Hilfe

Dieses Thema im Forum "Archiv" wurde erstellt von cobra2005, 20. Februar 2012.

  1. cobra2005
    Offline

    cobra2005 Ist gelegentlich hier

    Registriert:
    5. März 2009
    Beiträge:
    44
    Zustimmungen:
    3
    Punkte für Erfolge:
    0
    Habe ein Futro a240 mit Debian6.0.4(squeeze). Zwei Karten von (Sky und Tnk) laufen ohne Problem aber die dritte von HD+ will nicht.
    Alle Karten sind im Smargo und direkt an Server angeschlossen ohne HUB.
    Server ist Oscam 0.99.4 CCcam 2.1.1
    HD+ Karte ist im Smargo mit fw 1.5 (fixed, 3.68, normal, 0, 0)
    Meine configs sehen so aus und oscam.log.:

    oscam.log
    >> OSCam << cardserver started at Mon Feb 20 09:04:24 2012
    -------------------------------------------------------------------------------
    2012/02/20 9:04:24 1366 s version=0.99.4svn, build #3035, system=i686-pc-linux, nice=-1
    2012/02/20 9:04:24 1366 s max. clients=509, client max. idle=120 sec
    2012/02/20 9:04:24 1366 s max. logsize=4096 Kb
    2012/02/20 9:04:24 1366 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
    2012/02/20 9:04:24 1366 s shared memory initialized (size=4338546, id=0)
    2012/02/20 9:04:24 1366 s auth size=4772
    2012/02/20 9:04:24 1366 s services reloaded: 0 services freed, 14 services loaded
    2012/02/20 9:04:24 1366 s userdb reloaded: 0 accounts freed, 3 accounts loaded, 0 expired, 0 disabled
    2012/02/20 9:04:24 1366 s signal handling initialized (type=sysv)
    2012/02/20 9:04:24 1366 s 255 service-id's loaded
    2012/02/20 9:04:24 1366 s 11 tier-id's loaded
    2012/02/20 9:04:24 1366 s 1 provid's loaded
    2012/02/20 9:04:24 1381 s monitor: disabled
    2012/02/20 9:04:24 1381 s camd 3.3x: disabled
    2012/02/20 9:04:24 1381 s camd 3.5x: disabled
    2012/02/20 9:04:24 1381 s cs378x: disabled
    2012/02/20 9:04:24 1381 s newcamd: initialized (fd=6, port=22000, crypted)
    2012/02/20 9:04:24 1381 s CAID: 1702
    2012/02/20 9:04:24 1381 s provid #0: 000000
    2012/02/20 9:04:24 1381 s newcamd: initialized (fd=7, port=22001, crypted)
    2012/02/20 9:04:24 1381 s CAID: 1843
    2012/02/20 9:04:24 1381 s provid #0: 000000
    2012/02/20 9:04:24 1381 s provid #1: 003411
    2012/02/20 9:04:24 1381 s provid #2: 008011
    2012/02/20 9:04:24 1381 s newcamd: initialized (fd=8, port=22002, crypted)
    2012/02/20 9:04:24 1381 s CAID: 0B00
    2012/02/20 9:04:24 1381 s provid #0: 000000
    2012/02/20 9:04:24 1381 s cccam: disabled
    2012/02/20 9:04:24 1381 s radegast: disabled
    2012/02/20 9:04:24 1381 s logger started (pid=1383)
    2012/02/20 9:04:24 1381 s http started (pid=1384)
    2012/02/20 9:04:24 1381 s reader started (pid=1385, device=Serial:Reader 209, detect=cd, mhz=600, cardmhz=600)
    2012/02/20 9:04:24 1381 s reader started (pid=1386, device=Serial:Reader 7E1A78A, detect=cd, mhz=369, cardmhz=369)
    2012/02/20 9:04:24 1381 s reader started (pid=1387, device=002:004, detect=cd, mhz=480, cardmhz=357)
    2012/02/20 9:04:24 1384 h HTTP Server listening on port 16005
    2012/02/20 9:04:24 1381 s waiting for local card init
    2012/02/20 9:04:24 1387 r04 Found smartreader device 002:004
    2012/02/20 9:04:24 1386 r03 Found reader with serial Reader 7E1A78A at 002:002
    2012/02/20 9:04:24 1385 r02 Found reader with serial Reader 209 at 002:003
    2012/02/20 9:04:24 1385 r02 Found smartreader device Serial:Reader 209
    2012/02/20 9:04:24 1386 r03 Found smartreader device Serial:Reader 7E1A78A
    2012/02/20 9:04:24 1387 r04 card detected
    2012/02/20 9:04:24 1385 r02 card detected
    2012/02/20 9:04:24 1386 r03 card detected
    2012/02/20 9:04:26 1387 r04 ATR: 3B ............ 30
    2012/02/20 9:04:26 1387 r04 Maximum frequency for this card is formally 5 Mhz, clocking it to 4.80 Mhz
    2012/02/20 9:04:27 1387 r04 type: Conax, caid: 0B00, serial: 2...............3, hex serial: 7...........f, card: v64
    2012/02/20 9:04:27 1387 r04 Providers: 1
    2012/02/20 9:04:27 1387 r04 Provider: 1 Provider-Id: 000000
    2012/02/20 9:04:27 1387 r04 Provider: 1 SharedAddress: 0.............B
    2012/02/20 9:04:27 1387 r04 Package: 1, id: 1010, date: 2012/02/01 - 2012/02/29, name: TVN
    2012/02/20 9:04:28 1387 r04 [conax-reader] ready for requests
    2012/02/20 9:04:28 1386 r03 ATR: 3F ............................... 28
    2012/02/20 9:04:28 1386 r03 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.69 Mhz
    2012/02/20 9:04:30 1386 r03 detect native nagra card
    2012/02/20 9:04:30 1385 r02 ATR: 3B ................................ 6D
    2012/02/20 9:04:31 1385 r02 Maximum frequency for this card is formally 6 Mhz, clocking it to 6.00 Mhz
    2012/02/20 9:04:32 1385 r02 detect irdeto tunneled nagra card
    2012/02/20 9:04:32 1385 r02 no rsa key configured -> using irdeto mode
    2012/02/20 9:04:32 1385 r02 detect irdeto card
    2012/02/20 9:04:32 1385 r02 caid: 1702, acs: 3.84, country code: GER
    2012/02/20 9:04:32 1385 r02 providers: 4, ascii serial: 0................2, hex serial: 7............2, hex base: 1A
    2012/02/20 9:04:35 1385 r02 active providers: 2 (000000,000000)
    2012/02/20 9:04:35 1385 r02 entitlements for provider: 2, id: 000000
    2012/02/20 9:04:35 1385 r02 chid: 0107, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:35 1385 r02 chid: 0108, date: 2008/01/19 - 2008/01/21
    cccam.cfg
    N: 127.0.0.1 22000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
    N: 127.0.0.1 22001 user1 pass1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
    N: 127.0.0.1 22002 user2 pass2 01 02 03 04 05 06 07 08 09 10 11 12 13 14

    F: xxx xxxxxxxxx 3 0 0 { 0:0:1 }
    F: yyyyy yyyyyy 3 0 0 { 0:0:1 }
    F: ddddd dddddd 3 0 0 { 0:0:1 }
    F: mmm mmmmm 3 0 0 { 0:0:1 }

    CAID PRIO FILE : /var/keys/CCcam.prio
    PROVIDERINFO FILE : /var/keys/CCcam.providers
    CHANNELINFO FILE : /var/keys/CCcam.channelinfo

    SERVER LISTEN PORT : 12000

    WEBINFO LISTEN PORT : 16004
    WEBINFO USERNAME : xxxxx
    WEBINFO PASSWORD : xxxxx

    #Lokale Karten - (Smargo Reader)
    SERIAL READER : /dev/ttyUSB0 smartreader+
    SERIAL READER : /dev/ttyUSB1 smartreader+
    SERIAL READER : /dev/ttyUSB2 smartreader+

    #Allgemeine Einstellungen
    ALLOW TELNETINFO: no
    MINIMUM DOWNHOPS: 1
    DISABLE EMM : no
    EXTRA EMM LEVEL : no
    SHOW TIMING : yes

    oscam.server
    [reader]
    label = sky
    enable = 1
    protocol = smartreader
    device = Serial:Reader 209
    services = skyde,skyall,skywelt,skymusicchoiceextra,skycinema,skysport,skybundesliga,skyselect,skyhd,skyweltextra,bluemovie,skysonstige
    caid = 1702,1833
    boxid = 12345678
    detect = cd
    mhz = 600
    cardmhz = 600
    ident =
    group = 1
    emmcache = 1,3,2
    ecmcache = 0
    lb_weight = 100


    [reader]
    label = hd+
    enable = 1
    protocol = smartreader
    device = Serial:Reader 7E1A78A
    services = hdplus
    smargopatch = 1
    caid = 1843
    rsakey = BF.....D5
    boxkey = A......C
    detect = cd
    mhz = 369
    cardmhz = 369
    ident =
    group = 2
    emmcache = 1,3,2
    ecmcache = 1
    lb_weight = 100


    [reader]
    label = tnk
    enable = 1
    protocol = smartreader
    device = 002:004
    services = tnk
    caid = 0B00
    detect = cd
    mhz = 480
    cardmhz = 357
    ident = 0B00:000000
    group = 3
    emmcache = 1,3,2
    ecmcache = 1
    lb_weight = 100

    oscam.config
    [global]
    LogFile = /var/log/ipc/OScam.log
    maxlogsize = 4096
    nice = -1
    PreferLocalCards = 1
    WaitForCards = 1
    cachedelay = 120

    [newcamd]
    port = 22000@1702:000000; 22001@1843:000000,003411,008011; 22002@0B00:000000
    key = 0102030405060708091011121314

    #[cccam]
    port = 12000
    #reshare = 0
    version = 2.1.1

    [webif]
    httpport = 16005
    httpuser = xxxxx
    httppwd = xxxxxx
    httprefresh = 5
    httpallowed = 127.0.0.1,192.168.1.0-192.168.255.255

    oscam.user
    [account]
    user = user
    pwd = pass
    disabled = 0
    expdate =
    group = 1
    hostname =
    uniq = 0
    sleep = 0
    monlevel = 2
    au = sky
    services = skyde,skyall,skywelt,skymusicchoiceextra,skycinema,skysport,skybundesliga,skyselect,skyhd,skyweltextra,bluemovie,skysonstige
    caid = 1702,1833
    betatunnel = 1833.007A:1702,1833.007B:1702,1833.007C:1702,1833.007E:1702,1833.007F:1702,1833.0080:1702,1833.0081:1702,1833.0082:1702,1833.0083:1702,1833.0084:1702,1833.006F:1702,1833.006A:1702,1833.006B:1702,1833.0069:1702,1833.0070:1702,1833.0071:1702,1702.0001:007A,1702:007B,1702:007C,1702:007E,1702:007F,1702:0080,1702:0081,1702:0082,1702:0083,1702:0084,1702:006F,1702:006A,1702:006B,1702:0069,1702:0070,1702:0071,007A:0001,007B,007C,007E,007F,0080,0081,0082,0083,0084,006F,006A,006B,0069,0070,0071,0001
    ident = 1833:000000,1F1F1F
    cccmaxhops = 10
    keepalive = 1
    numusers = 0
    penalty = 0

    [account]
    user = user1
    pwd = pass1
    disabled = 0
    expdate =
    group = 2
    hostname =
    uniq = 0
    sleep = 0
    monlevel = 2
    au = hd+
    services = hdplus
    caid = 1843
    betatunnel =
    ident = 1843:000000,003411,008011
    cccmaxhops = 10
    keepalive = 1
    numusers = 0
    penalty = 0

    [account]
    user = user2
    pwd = pass2
    disabled = 0
    expdate =
    group = 3
    hostname =
    uniq = 1
    sleep = 0
    monlevel = 2
    au = tnk
    services = tnk
    caid = 0B00
    betatunnel =
    ident =
    cccmaxhops = 10
    keepalive = 1
    numusers = 0
    penalty = 0


    Ich habe auch schon unter oscam.server den protocol als mouse eingestellt.
    Bei oscam web info steht hd+ als ERROR.

    Ich bin seid zwei Tagen dran und bekomme nicht hin.
    Hat einer von Euch eine Idee

    Gruß cobra
     
    Zuletzt bearbeitet: 20. Februar 2012
    #1
  2. phantom

    Nervigen User Advertisement

  3. Kermit
    Offline

    Kermit Guest

    AW: Problem mit Smargo und HD+ schwarze Karte. Bitte um Hilfe

    Hallo cobra,

    leider hast du dein Logfile etwas zu früh beschnitten.
    Das ist alles was in deinem Log steht bzgl des angesprochenen Readers. Die eigentliche Fehlermeldung von OScam fehlt.
    Ich selber habe jetzt keinen Fehler in deiner Konfig sehen können.

    Grüße

    Kermit
     
    #2
  4. cobra2005
    Offline

    cobra2005 Ist gelegentlich hier

    Registriert:
    5. März 2009
    Beiträge:
    44
    Zustimmungen:
    3
    Punkte für Erfolge:
    0
    AW: Problem mit Smargo und HD+ schwarze Karte. Bitte um Hilfe

    Hier nochmal die oscam.log
    Das ist alles was ich bekomme es ist jetzt komplett.

    >> OSCam << cardserver started at Mon Feb 20 09:04:24 2012
    -------------------------------------------------------------------------------
    2012/02/20 9:04:24 1366 s version=0.99.4svn, build #3035, system=i686-pc-linux, nice=-1
    2012/02/20 9:04:24 1366 s max. clients=509, client max. idle=120 sec
    2012/02/20 9:04:24 1366 s max. logsize=4096 Kb
    2012/02/20 9:04:24 1366 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
    2012/02/20 9:04:24 1366 s shared memory initialized (size=4338546, id=0)
    2012/02/20 9:04:24 1366 s auth size=4772
    2012/02/20 9:04:24 1366 s services reloaded: 0 services freed, 14 services loaded
    2012/02/20 9:04:24 1366 s userdb reloaded: 0 accounts freed, 3 accounts loaded, 0 expired, 0 disabled
    2012/02/20 9:04:24 1366 s signal handling initialized (type=sysv)
    2012/02/20 9:04:24 1366 s 255 service-id's loaded
    2012/02/20 9:04:24 1366 s 11 tier-id's loaded
    2012/02/20 9:04:24 1366 s 1 provid's loaded
    2012/02/20 9:04:24 1381 s monitor: disabled
    2012/02/20 9:04:24 1381 s camd 3.3x: disabled
    2012/02/20 9:04:24 1381 s camd 3.5x: disabled
    2012/02/20 9:04:24 1381 s cs378x: disabled
    2012/02/20 9:04:24 1381 s newcamd: initialized (fd=6, port=22000, crypted)
    2012/02/20 9:04:24 1381 s CAID: 1702
    2012/02/20 9:04:24 1381 s provid #0: 000000
    2012/02/20 9:04:24 1381 s newcamd: initialized (fd=7, port=22001, crypted)
    2012/02/20 9:04:24 1381 s CAID: 1843
    2012/02/20 9:04:24 1381 s provid #0: 000000
    2012/02/20 9:04:24 1381 s provid #1: 003411
    2012/02/20 9:04:24 1381 s provid #2: 008011
    2012/02/20 9:04:24 1381 s newcamd: initialized (fd=8, port=22002, crypted)
    2012/02/20 9:04:24 1381 s CAID: 0B00
    2012/02/20 9:04:24 1381 s provid #0: 000000
    2012/02/20 9:04:24 1381 s cccam: disabled
    2012/02/20 9:04:24 1381 s radegast: disabled
    2012/02/20 9:04:24 1381 s logger started (pid=1383)
    2012/02/20 9:04:24 1381 s http started (pid=1384)
    2012/02/20 9:04:24 1381 s reader started (pid=1385, device=Serial:Reader 209, detect=cd, mhz=600, cardmhz=600)
    2012/02/20 9:04:24 1381 s reader started (pid=1386, device=Serial:Reader 7E1A78A, detect=cd, mhz=369, cardmhz=369)
    2012/02/20 9:04:24 1381 s reader started (pid=1387, device=002:004, detect=cd, mhz=480, cardmhz=357)
    2012/02/20 9:04:24 1384 h HTTP Server listening on port 16005
    2012/02/20 9:04:24 1381 s waiting for local card init
    2012/02/20 9:04:24 1387 r04 Found smartreader device 002:004
    2012/02/20 9:04:24 1386 r03 Found reader with serial Reader 7E1A78A at 002:002
    2012/02/20 9:04:24 1385 r02 Found reader with serial Reader 209 at 002:003
    2012/02/20 9:04:24 1385 r02 Found smartreader device Serial:Reader 209
    2012/02/20 9:04:24 1386 r03 Found smartreader device Serial:Reader 7E1A78A
    2012/02/20 9:04:24 1387 r04 card detected
    2012/02/20 9:04:24 1385 r02 card detected
    2012/02/20 9:04:24 1386 r03 card detected
    2012/02/20 9:04:26 1387 r04 ATR: 3B .............. 30
    2012/02/20 9:04:26 1387 r04 Maximum frequency for this card is formally 5 Mhz, clocking it to 4.80 Mhz
    2012/02/20 9:04:27 1387 r04 type: Conax, caid: 0B00, serial: 2............3, hex serial: ................, card: v64
    2012/02/20 9:04:27 1387 r04 Providers: 1
    2012/02/20 9:04:27 1387 r04 Provider: 1 Provider-Id: 000000
    2012/02/20 9:04:27 1387 r04 Provider: 1 SharedAddress: 0...........B
    2012/02/20 9:04:27 1387 r04 Package: 1, id: 1010, date: 2012/02/01 - 2012/02/29, name: TVN
    2012/02/20 9:04:28 1387 r04 [conax-reader] ready for requests
    2012/02/20 9:04:28 1386 r03 ATR: 3F ..................... 28
    2012/02/20 9:04:28 1386 r03 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.69 Mhz
    2012/02/20 9:04:30 1386 r03 detect native nagra card
    2012/02/20 9:04:30 1385 r02 ATR: 3B .................. 6D
    2012/02/20 9:04:31 1385 r02 Maximum frequency for this card is formally 6 Mhz, clocking it to 6.00 Mhz
    2012/02/20 9:04:32 1385 r02 detect irdeto tunneled nagra card
    2012/02/20 9:04:32 1385 r02 no rsa key configured -> using irdeto mode
    2012/02/20 9:04:32 1385 r02 detect irdeto card
    2012/02/20 9:04:32 1385 r02 caid: 1702, acs: 3.84, country code: GER
    2012/02/20 9:04:32 1385 r02 providers: 4, ascii serial: 0........2, hex serial: 7..........2, hex base: 1A
    2012/02/20 9:04:35 1385 r02 active providers: 2 (000000,000000)
    2012/02/20 9:04:35 1385 r02 entitlements for provider: 2, id: 000000
    2012/02/20 9:04:35 1385 r02 chid: 0107, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:35 1385 r02 chid: 0108, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:35 1385 r02 chid: 7D2B, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:35 1385 r02 chid: 7D24, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:35 1385 r02 chid: 7D23, date: 2011/10/12 - 2012/04/05
    2012/02/20 9:04:35 1385 r02 chid: 61BD, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:35 1385 r02 chid: 04BA, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:35 1385 r02 chid: 04C4, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:35 1385 r02 chid: 7D2C, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:35 1385 r02 chid: 7D2D, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:35 1385 r02 chid: 7D22, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:35 1385 r02 chid: 03FF, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:35 1385 r02 chid: 05DC, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:35 1385 r02 chid: 03F4, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:35 1385 r02 chid: 03EC, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:35 1385 r02 chid: 03EF, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:35 1385 r02 chid: 03E9, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:35 1385 r02 chid: 03ED, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:35 1385 r02 chid: 03F3, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:35 1385 r02 chid: 03F5, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 03EB, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 03F6, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 03F9, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 0401, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 0402, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 03F7, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 0403, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 0404, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 03FA, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 041A, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 000F, date: 2011/02/20 - 2011/11/01
    2012/02/20 9:04:36 1385 r02 chid: 7D21, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 03DE, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 03DF, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 0400, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 03F1, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 03EA, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 03F2, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 7D27, date: 2011/10/12 - 2012/04/05
    2012/02/20 9:04:36 1385 r02 chid: 03FD, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 00F0, date: 2011/02/20 - 2011/11/01
    2012/02/20 9:04:36 1385 r02 chid: 03E8, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 0514, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 044C, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 00F5, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 0069, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 0102, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 026C, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 028B, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 028C, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 028D, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 028E, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 028F, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 0290, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 029E, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 0291, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 0292, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 0293, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 0294, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:36 1385 r02 chid: 0295, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:37 1385 r02 chid: 028A, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:37 1385 r02 chid: 0298, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:37 1385 r02 chid: 0299, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:37 1385 r02 chid: 029A, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:37 1385 r02 chid: 029B, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:37 1385 r02 chid: 029C, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:37 1385 r02 chid: 029D, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:37 1385 r02 chid: 0103, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:37 1385 r02 chid: 029C, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:37 1385 r02 chid: 0104, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:37 1385 r02 chid: 0406, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:37 1385 r02 chid: 0105, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:37 1385 r02 chid: 0004, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:37 1385 r02 chid: 05FB, date: 2011/10/12 - 2012/04/05
    2012/02/20 9:04:37 1385 r02 chid: 05F2, date: 2011/10/12 - 2012/04/05
    2012/02/20 9:04:37 1385 r02 chid: 04CE, date: 2011/02/20 - 2011/11/01
    2012/02/20 9:04:37 1385 r02 chid: 0605, date: 2011/10/12 - 2012/04/05
    2012/02/20 9:04:37 1385 r02 chid: 05F1, date: 2011/10/12 - 2012/04/05
    2012/02/20 9:04:37 1385 r02 chid: 05DD, date: 2011/02/20 - 2011/11/01
    2012/02/20 9:04:37 1385 r02 chid: 05FC, date: 2011/10/12 - 2012/04/05
    2012/02/20 9:04:38 1385 r02 chid: 05DF, date: 2011/10/12 - 2012/04/05
    2012/02/20 9:04:38 1385 r02 chid: 0609, date: 2011/10/12 - 2012/04/05
    2012/02/20 9:04:38 1385 r02 chid: 0276, date: 2011/10/12 - 2012/04/05
    2012/02/20 9:04:38 1385 r02 chid: 05DE, date: 2011/02/20 - 2011/11/01
    2012/02/20 9:04:38 1385 r02 chid: 05E8, date: 2011/10/12 - 2012/04/05
    2012/02/20 9:04:38 1385 r02 chid: 05E7, date: 2011/10/12 - 2012/04/05
    2012/02/20 9:04:38 1385 r02 chid: 0515, date: 2008/01/19 - 2008/01/21
    2012/02/20 9:04:38 1385 r02 chid: 0606, date: 2011/10/12 - 2012/04/05
    2012/02/20 9:04:38 1385 r02 [irdeto-reader] ready for requests
    2012/02/20 9:04:42 1386 r03 card system not supported
    2012/02/20 9:04:42 1386 r03 Normal mode failed, reverting to Deprecated Mode
    2012/02/20 9:04:45 1386 r03 ATR: 3F.................................... 28
    2012/02/20 9:04:46 1386 r03 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.69 Mhz
    2012/02/20 9:04:48 1386 r03 detect native nagra card
    2012/02/20 9:05:00 1386 r03 card system not supported
    2012/02/20 9:05:00 1386 r03 card initializing error
    2012/02/20 9:05:00 1381 s init for all local cards done
    2012/02/20 9:05:00 1381 s anti cascading disabled
    2012/02/20 9:05:00 1381 s dvbapi: dvbapi disabled
    2012/02/20 9:05:00 1381 s client(1) connect from 127.0.0.1 (pid=1421, pipfd=16)
    2012/02/20 9:05:00 1381 s client(2) connect from 127.0.0.1 (pid=1422, pipfd=17)
    2012/02/20 9:05:00 1381 s client(3) connect from 127.0.0.1 (pid=1423, pipfd=18)
    2012/02/20 9:05:00 1381 s client(4) connect from 127.0.0.1 (pid=1424, pipfd=19)
    2012/02/20 9:05:00 1381 s client(5) connect from 127.0.0.1 (pid=1425, pipfd=20)
    2012/02/20 9:05:00 1381 s client(6) connect from 127.0.0.1 (pid=1426, pipfd=21)
    2012/02/20 9:05:00 1381 s client(7) connect from 127.0.0.1 (pid=1427, pipfd=22)
    2012/02/20 9:05:00 1422 c02 Connection closed to client
    2012/02/20 9:05:00 1423 c03 Connection closed to client
    2012/02/20 9:05:00 1424 c04 Connection closed to client
    2012/02/20 9:05:00 1425 c05 Connection closed to client
    2012/02/20 9:05:00 1421 c01 Connection closed to client
    2012/02/20 9:05:00 1426 c06 Connection closed to client
    2012/02/20 9:05:00 1381 s client(8) connect from 127.0.0.1 (pid=1428, pipfd=23)
    2012/02/20 9:05:00 1428 c08 encrypted newcamd:22001-client 127.0.0.1 granted (user1, au=hd+)
    2012/02/20 9:05:00 1428 c08 user user1 authenticated successfully (CCcam)
    2012/02/20 9:05:00 1428 c08 AU wont be used on this port -> disable AU
    2012/02/20 9:05:00 1427 c07 Connection closed to client
    2012/02/20 9:05:01 1381 s client(1) connect from 127.0.0.1 (pid=1450, pipfd=16)
    2012/02/20 9:05:01 1450 c01 encrypted newcamd:22002-client 127.0.0.1 granted (user2, au=tnk)
    2012/02/20 9:05:01 1450 c01 user user2 authenticated successfully (CCcam)
    2012/02/20 9:05:01 1450 c01 AU enabled for user user2 on reader tnk
    2012/02/20 9:05:07 1381 s client(2) connect from 127.0.0.1 (pid=1451, pipfd=17)
    2012/02/20 9:05:07 1451 c02 encrypted newcamd:22000-client 127.0.0.1 granted (user, au=sky)
    2012/02/20 9:05:07 1451 c02 user user authenticated successfully (CCcam)
    2012/02/20 9:05:07 1451 c02 AU enabled for user user on reader sky
    2012/02/20 9:05:07 1451 c02 no valid PROVID(s) found in CAID for user 'user'
    2012/02/20 9:49:57 1386 r03 card detected
    2012/02/20 9:49:59 1451 c02 user (1702&000000/007C/93:9A67): found (682 ms) by sky
    2012/02/20 9:50:00 1386 r03 ATR is malformed, it reports 15 historical bytes but there are only 13
    2012/02/20 9:50:00 1386 r03 ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30
    2012/02/20 9:50:01 1386 r03 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.69 Mhz
    2012/02/20 9:50:03 1386 r03 detect native nagra card
    2012/02/20 9:50:03 1451 c02 user (1702&000000/0081/93:0EA5): found (676 ms) by sky
    2012/02/20 9:50:06 1451 c02 user (1702&000000/007C/93:9B5D): found (679 ms) by sky
    2012/02/20 9:50:10 1451 c02 user (1702&000000/0081/93:94AC): found (676 ms) by sky
    2012/02/20 9:50:13 1451 c02 user (1702&000000/007C/93:65C5): found (681 ms) by sky
    2012/02/20 9:50:15 1386 r03 card system not supported
    2012/02/20 9:50:15 1386 r03 Normal mode failed, reverting to Deprecated Mode
    2012/02/20 9:50:17 1451 c02 user (1702&000000/0081/93:3452): found (674 ms) by sky
    2012/02/20 9:50:18 1386 r03 ATR: 3F ...................................
    2012/02/20 9:50:20 1451 c02 user (1702&000000/007C/93:3EDF): found (678 ms) by sky
    2012/02/20 9:50:20 1386 r03 detect native nagra card
    2012/02/20 9:50:24 1451 c02 user (1702&000000/0081/93:AAAF): found (676 ms) by sky
    2012/02/20 9:50:27 1451 c02 user (1702&000000/007C/93:6A07): found (684 ms) by sky
    2012/02/20 9:50:31 1451 c02 user (1702&000000/0081/93:F784): found (677 ms) by sky
    2012/02/20 9:50:32 1386 r03 card system not supported
    2012/02/20 9:50:32 1386 r03 card initializing error
     
    Zuletzt von einem Moderator bearbeitet: 21. Februar 2012
    #3
  5. Kermit
    Offline

    Kermit Guest

    AW: Problem mit Smargo und HD+ schwarze Karte. Bitte um Hilfe

    Als aller erstes editiere mal dein Posting und mach die SN der Karten unkenntlich!

    Mh sehr seltsam - ich kann jetzt nur von einem Igel ausgehen und der ist in Bezug auf die Stromversorgung an den USB Ports nicht der Beste. Kannst du mal versuchen den betreffenden Reader an einen aktiven USB Hub zu hängen?

    Ein anderer Versuch wäre OScam zu starten mit Reader aber ohne eingesteckte Karte und erst wenn OScam läuft die Karte einstecken....


    Edit: Ich bin betriebsblind :-(
    Du verwendest eine Readereinstellung die nicht zu deiner OScam Version passt!
    Mach mal ein update auf eine aktuelle Version oder füge bei den Keys ein r3_ vor den Einträgen rsa und boxkey ein (IIRC)

    Grüße

    Kermit
     
    Zuletzt von einem Moderator bearbeitet: 20. Februar 2012
    #4
  6. Zeerith
    Offline

    Zeerith Ist gelegentlich hier

    Registriert:
    27. Dezember 2009
    Beiträge:
    32
    Zustimmungen:
    3
    Punkte für Erfolge:
    8
    AW: Problem mit Smargo und HD+ schwarze Karte. Bitte um Hilfe

    Hatte ein ähnliches Problem mit meinem Smargo und der schwarzen HD+ Karte.

    Lief bei mir nur nach dem ich die Cardmhz hochgesetzt hatte auf 6Mhz. Kannst du ja mal Probieren.

    [reader]
    label = hd+
    enable = 1
    protocol = smartreader
    device = Serial:Reader 7E1A78A
    services = hdplus
    smargopatch = 1
    caid = 1843
    rsakey = BF.....D5
    boxkey = A......C
    detect = cd
    mhz = 369
    cardmhz = 600
    ident =
    group = 2
    emmcache = 1,3,2
    ecmcache = 1
    lb_weight = 100

    Gruss
    Zeerith
     
    #5
  7. meister85
    Offline

    meister85 VIP

    Registriert:
    21. September 2009
    Beiträge:
    7.927
    Zustimmungen:
    5.229
    Punkte für Erfolge:
    113
    AW: Problem mit Smargo und HD+ schwarze Karte. Bitte um Hilfe

    Wenn er auf eine aktuelle updatet darf er nicht das n3_ davor machen....

    Nur wenn er auf diese Version bleiben möchte, muss er das n3_ davor tun....
     
    #6
  8. cobra2005
    Offline

    cobra2005 Ist gelegentlich hier

    Registriert:
    5. März 2009
    Beiträge:
    44
    Zustimmungen:
    3
    Punkte für Erfolge:
    0
    AW: Problem mit Smargo und HD+ schwarze Karte. Bitte um Hilfe

    Hallo
    Es will nicht funktionieren mit n3_
    Update gemacht auf neue version will auch nicht (natürlich ohne n3_)
    cardmhz = 600 will auch nicht

    Ich weiss es nicht mehr, habe versucht mit smartmouse will aber auch nicht.

    Gruß
     
    #7
  9. meister85
    Offline

    meister85 VIP

    Registriert:
    21. September 2009
    Beiträge:
    7.927
    Zustimmungen:
    5.229
    Punkte für Erfolge:
    113
    AW: Problem mit Smargo und HD+ schwarze Karte. Bitte um Hilfe

    Hast du mal geprüft ob der Box- und RSA Key richtig ist (bitte nicht hier posten!) ???

    Ansonsten mal versuchen den Protokoll auf mouse zu ändern und direkt per ttyUSB... ansprechen!
     
    #8

Diese Seite empfehlen