1. Diese Seite verwendet Cookies. Wenn du dich weiterhin auf dieser Seite aufhältst, akzeptierst du unseren Einsatz von Cookies. Weitere Informationen

ORF über DOSCam (Server) mittels ProgDVB und ACamd (Client)

Dieses Thema im Forum "Oscam Talk Archiv" wurde erstellt von pac2002, 3. Juni 2013.

  1. pac2002
    Offline

    pac2002 Newbie

    Registriert:
    2. Juni 2013
    Beiträge:
    16
    Zustimmungen:
    0
    Punkte für Erfolge:
    1
    Guten Abend zusammen,
    bei meinem aktuellem Versuch ORF über DOSCam mit ACamd zu verbinden scheitere ich derzeit und bräuchte ein wenig Unterstützung.

    Zuerst ein paar Fakten

    Server:
    QNAP (Intel x86)
    DOSCam (doscamV0.svn7963):
    Version: oscam-1.20-unstable_svn-r7963
    Web interface support: yes
    Touch interface support: yes
    SSL support: no
    DVB API support: no
    Anti-cascading support: yes
    Irdeto guessing: yes
    Debug mode: yes
    Monitor: yes
    Loadbalancing support: yes
    LCD support: yes
    LED support: yes
    IPv6 support: no
    Cache exchange support: yes
    camd 3.3x: no
    camd 3.5 UDP: yes
    camd 3.5 TCP: yes
    newcamd: yes
    CCcam: yes
    CCcam share: yes
    Pandora: yes
    gbox: yes
    radegast: yes
    serial: yes
    constant CW: yes
    Reader support: yes
    Nagra: yes
    Irdeto: yes
    Conax: yes
    Cryptoworks: yes
    Seca: yes
    Viaccess: yes
    NDS Videoguard: yes
    DRE Crypt: yes
    TONGFANG: yes
    Bulcrypt: yes
    cardreader_phoenix: yes
    cardreader_internal_azbox: no
    cardreader_internal_coolapi: no
    cardreader_internal_sci: no
    cardreader_sc8in1: yes
    cardreader_mp35: yes
    cardreader_smargo: yes
    cardreader_pcsc: no
    cardreader_smartreader: no
    cardreader_db2com: no
    cardreader_stapi: no
    oscam.conf:
    # oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7963
    # Read more:

    Dieser Link ist nur für Mitglieder!!! Jetzt kostenlos Registrieren ?


    [global]
    loghistorysize = 1024
    logfile = /tmp/oscam.log
    nice = -1
    maxlogsize = 20
    block_same_ip = 0
    block_same_name = 0
    [cccam]
    port = 12000
    nodeid = 28************5E
    version = 2.1.4
    reshare = 3
    reshare_mode = 2
    updateinterval = 300
    [webif]
    httpport = 16001
    httpuser = testuser
    httppwd = testpass
    httprefresh = 10
    httpallowed = 127.0.0.1,192.168.1.0-192.168.1.255
    oscam.server:
    [reader]
    label = emu
    protocol = constcw
    device = /share/MD0_DATA/.qpkg/Optware/etc/SoftCam.Key
    caid = 0D05
    oscam.user:
    [account]
    user = testuser
    pwd = testpass
    uniq = 0
    group = 1,2,3,4
    caid = 0D05

    Client:
    Win7 Ultimate 64Bit
    ProgDVB 6.xx
    ACamd 6.2.0
    ACamd.ini:
    [ACamd]
    DisableClientOnBadConnection=0
    DisKeyDelay=1
    Only184=1
    DisableEmmCache=0
    DisableDCWCache=0
    DisableEcmCache=0
    DisplayFilterActions=0
    ShowMonitor=0
    Active=1
    ReadPmtFile=1
    DisplayCCcamNShare=0
    ReadPMT=1
    DeleteUnusedEcm=1
    AutoSearch=1
    MultiEcm=0
    UseChCacheIni=0
    DisplayChameleon2Share=0
    LockOnConnectionId=1
    DCWTweak=1
    UseCHIDCacheIni=0
    ReadCAT=1
    cardclient.conf:
    cccamn:192.168.1.10:12000:0/0000/0000:testuser:testpass
    ACamd_PMT.txt:
    I:0D95:00000000:caid only
    I:0B00:00000000:caid only
    I:1702:00000000:caid only
    I:1830:00000000:caid only
    I:1722:00000000:Test
    I:1834:00000000:Test
    I:09AF:00000000:Test
    I:09C4:00000000:Test
    I:09C7:00000000:Test
    I:1861:00000000:Test
    I:1837:00000000:Test
    I:0648:00000000:Test
    I:09C4:00000000:Test
    I:1833:00000000:1702:00000000:HD-Mapping
    P:0D05:00000000:caid only
    P:0D05:00000004:caid and provider
    Hinweis
    Die SoftCam.Key ist gültig und mit Hilfe von vPlug in ProgDVB wird ORF auch hell. Keys sind also gültig.

    Zum Problem
    DOSCam starte ich wie folgt:
    [/share/MD0_DATA/.qpkg/Optware/bin] # ./oscam -c /share/MD0_DATA/.qpkg/Optware/etc -d 65535
    Wenn ich nun die selbe SoftCam.Key in DOSCam benutze bekomme ich (Full-Debug) auf Server Seite:
    2013/06/03 00:03:42 0 s log_list_thread thread started
    -------------------------------------------------------------------------------
    >> OSCam << cardserver started at Mon Jun 3 00:03:42 2013
    -------------------------------------------------------------------------------
    2013/06/03 00:03:42 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7963 (i686-linux-gnu)
    2013/06/03 00:03:42 0 s version=1.20-unstable_svn, build #7963, system=i686-linux-gnu, nice=-1
    2013/06/03 00:03:42 0 s client max. idle=120 sec, debug level=65535, filter_sensitive=1
    2013/06/03 00:03:42 0 s max. logsize=20 Kb, loghistorysize=1024 bytes
    2013/06/03 00:03:42 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
    2013/06/03 00:03:42 0 s share updater thread started
    2013/06/03 00:03:42 0 share-updater mode=initfast t=1s i=30
    2013/06/03 00:03:42 0 s ERROR: Cannot open file "/share/MD0_DATA/.qpkg/Optware/etc/oscam.services" (errno=2 No such file or directory)
    2013/06/03 00:03:42 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
    2013/06/03 00:03:42 0 s signal handling initialized (type=sysv)
    2013/06/03 00:03:42 0 s ERROR: Cannot open file "/share/MD0_DATA/.qpkg/Optware/etc/oscam.srvid" (errno=2 No such file or directory)
    2013/06/03 00:03:42 0 s ERROR: Cannot open file "/share/MD0_DATA/.qpkg/Optware/etc/oscam.tiers" (errno=2 No such file or directory)
    2013/06/03 00:03:42 0 s ERROR: Cannot open file "/share/MD0_DATA/.qpkg/Optware/etc/oscam.provid" (errno=2 No such file or directory)
    2013/06/03 00:03:42 0 s ERROR: Cannot open file "/share/MD0_DATA/.qpkg/Optware/etc/oscam.guess" (errno=2 No such file or directory)
    2013/06/03 00:03:42 0 s ERROR: Cannot open file "/share/MD0_DATA/.qpkg/Optware/etc/oscam.ird" (errno=2 No such file or directory)
    2013/06/03 00:03:42 0 s ERROR: Cannot open file "/share/MD0_DATA/.qpkg/Optware/etc/oscam.whitelist" (errno=2 No such file or directory)
    2013/06/03 00:03:42 0 s ERROR: Cannot open file "/share/MD0_DATA/.qpkg/Optware/etc/oscam.cacheex" (errno=2 No such file or directory)
    2013/06/03 00:03:42 0 s Starting listener 0
    2013/06/03 00:03:42 0 s monitor: disabled
    2013/06/03 00:03:42 0 s Starting listener 0
    2013/06/03 00:03:42 0 s camd35: disabled
    2013/06/03 00:03:42 0 s Starting listener 0
    2013/06/03 00:03:42 0 s cs378x: disabled
    2013/06/03 00:03:42 0 s Starting listener 0
    2013/06/03 00:03:42 0 s newcamd: disabled
    2013/06/03 00:03:42 0 s Starting listener 0
    2013/06/03 00:03:42 0 s cccam: initialized (fd=4, port=12000, crypted)
    2013/06/03 00:03:42 0 s Starting listener 0
    2013/06/03 00:03:42 0 s pandora: disabled
    2013/06/03 00:03:42 0 s Starting listener 0
    2013/06/03 00:03:42 0 s csp: disabled
    2013/06/03 00:03:42 0 s Starting listener 0
    2013/06/03 00:03:42 0 s radegast: disabled
    2013/06/03 00:03:42 0 s starting thread http
    2013/06/03 00:03:42 0 s http thread started
    2013/06/03 00:03:42 0 s starting thread reader check
    2013/06/03 00:03:42 0 s reader check thread started
    2013/06/03 00:03:42 0 s starting thread check
    2013/06/03 00:03:42 0 s check thread started
    2013/06/03 00:03:42 0 s cardreader: Initializing
    2013/06/03 00:03:42 0 s emu [constcw] TRACE: protocol: constcw
    2013/06/03 00:03:42 F7400468 h HTTP Server listening on port 16001
    2013/06/03 00:03:42 0 s emu [constcw] creating thread for device /share/MD0_DATA/.qpkg/Optware/etc/SoftCam.Key
    2013/06/03 00:03:42 0 s start reader thread action 8
    2013/06/03 00:03:42 81C0818 r data from add_job action=8 client r emu
    2013/06/03 00:03:42 0 s loadbalancer: can't read from file /tmp/.oscam/stat
    2013/06/03 00:03:42 0 s waiting for local card init
    2013/06/03 00:03:42 81C0818 p emu [constcw] proxy initialized, server /share/MD0_DATA/.qpkg/Optware/etc/SoftCam.Key:0
    2013/06/03 00:03:42 0 s init for all local cards done
    2013/06/03 00:03:42 0 s anti cascading disabled
    2013/06/03 00:03:43 0 share-update [1] 2648772945 0
    2013/06/03 00:03:43 0 s-card added: id 0 remoteid 10000 caid D05 hop 0 reshare 3 originid 0 cardtype 4
    2013/06/03 00:03:43 0 reported/updated +1/-0/dup 0 of 1 cards to sharelist
    2013/06/03 00:03:43 0 share-updater mode=initfast t=1s i=30
    2013/06/03 00:03:44 0 share-updater mode=initfast t=1s i=29
    2013/06/03 00:03:45 0 share-updater mode=initfast t=1s i=28
    2013/06/03 00:03:46 0 share-updater mode=initfast t=1s i=27
    2013/06/03 00:03:47 0 share-updater mode=initfast t=1s i=26
    2013/06/03 00:03:48 0 share-updater mode=initfast t=1s i=25
    2013/06/03 00:03:49 0 share-updater mode=initfast t=1s i=24
    2013/06/03 00:03:50 0 share-updater mode=initfast t=1s i=23
    2013/06/03 00:03:51 0 share-updater mode=initfast t=1s i=22
    2013/06/03 00:03:52 0 share-updater mode=initfast t=1s i=21
    2013/06/03 00:03:53 0 share-updater mode=initfast t=1s i=20
    2013/06/03 00:03:54 0 share-updater mode=initfast t=1s i=19
    2013/06/03 00:03:55 0 share-updater mode=initfast t=1s i=18
    2013/06/03 00:03:56 0 share-updater mode=initfast t=1s i=17
    2013/06/03 00:03:57 0 share-updater mode=initfast t=1s i=16
    2013/06/03 00:03:58 0 share-updater mode=initfast t=1s i=15
    2013/06/03 00:03:59 0 share-updater mode=initfast t=1s i=14
    2013/06/03 00:04:00 0 share-updater mode=initfast t=1s i=13
    2013/06/03 00:04:01 0 share-updater mode=initfast t=1s i=12
    2013/06/03 00:04:02 0 s start client thread action 26
    2013/06/03 00:04:02 F7402C30 c data from add_job action=26 client c anonymous
    2013/06/03 00:04:02 F7402C30 c cccam: new connection from 192.168.1.55
    2013/06/03 00:04:02 F7402C30 c send ccc checksum
    2013/06/03 00:04:02 F7402C30 c receive ccc checksum
    2013/06/03 00:04:02 F7402C30 c ccc username received testuser
    2013/06/03 00:04:02 F7402C30 c ccc passwdhash received testuser
    2013/06/03 00:04:02 F7402C30 c encrypted cccam-client 192.168.1.55 granted (testuser, au=off)
    2013/06/03 00:04:02 F7402C30 c ccc user authenticated testuser
    2013/06/03 00:04:02 F7402C30 c cccam: send ack:
    2013/06/03 00:04:02 F7402C30 43 43 63 61 6D 00 00 00 00 00 00 00 00 00 00 00
    2013/06/03 00:04:02 F7402C30 00 00 00 00
    2013/06/03 00:04:02 F7402C30 c cccam: cli data:
    2013/06/03 00:04:02 F7402C30 00 00 00 5D 74 65 73 74 75 73 65 72 00 00 00 00
    2013/06/03 00:04:02 F7402C30 00 00 00 00 00 00 00 00 79 ** ** ** ** ** ** DE
    2013/06/03 00:04:02 F7402C30 00 32 2E 31 2E 34 00 00 00 00 00 00 00 00 00 00
    2013/06/03 00:04:02 F7402C30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    2013/06/03 00:04:02 F7402C30 00 33 31 39 31 00 00 00 00 00 00 00 00 00 00 00
    2013/06/03 00:04:02 F7402C30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    2013/06/03 00:04:02 F7402C30 00
    2013/06/03 00:04:02 F7402C30 c cccam(s) testuser: client 'testuser' (79************DE) running v2.1.4 (3191)
    2013/06/03 00:04:02 F7402C30 c ccc send srv_data testuser
    2013/06/03 00:04:02 F7402C30 c cccam: send server data
    2013/06/03 00:04:02 F7402C30 c cccam: auto build set for version: 2.1.4 build: 3191
    2013/06/03 00:04:02 F7402C30 c cccam(s) testuser: version: 2.1.4, build: 3191 nodeid: 79************DE
    2013/06/03 00:04:02 0 share-updater mode=initfast t=1s i=11
    2013/06/03 00:04:03 0 share-updater mode=initfast t=1s i=10
    2013/06/03 00:04:04 F7402C30 c cccam(s) testuser: 2.1.x compatibility mode
    2013/06/03 00:04:04 F7402C30 c ccc send cards testuser
    2013/06/03 00:04:04 F7402C30 c reported 1 cards for testuser
    2013/06/03 00:04:04 F7402C30 c ccc connected and waiting for data testuser
    2013/06/03 00:04:04 F7402C30 c cccam(s) testuser: parse_msg=1
    2013/06/03 00:04:04 F7402C30 c cccam(s) testuser: ECM request from client: caid 0d05 srvid 32c9(156) prid 000000
    2013/06/03 00:04:04 F7402C30 c Client testuser csphash A4723FD2 cw 00000000000000000000000000000000 rc 4 0D05&000004/0000/32C9/9C:187D9A922D79E7B73A97399770242094
    2013/06/03 00:04:04 F7402C30 c cw:
    2013/06/03 00:04:04 F7402C30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    2013/06/03 00:04:04 0 share-updater mode=initfast t=1s i=9
    2013/06/03 00:04:05 0 share-updater mode=initfast t=1s i=8
    2013/06/03 00:04:06 0 share-updater mode=initfast t=1s i=7
    2013/06/03 00:04:07 0 share-updater mode=initfast t=1s i=6
    2013/06/03 00:04:08 0 share-updater mode=initfast t=1s i=5
    2013/06/03 00:04:09 0 share-updater mode=initfast t=1s i=4
    2013/06/03 00:04:10 0 share-updater mode=initfast t=1s i=3
    2013/06/03 00:04:11 0 share-updater mode=initfast t=1s i=2
    2013/06/03 00:04:12 0 share-updater mode=initfast t=1s i=1
    2013/06/03 00:04:13 0 share-updater mode=interval t=300s
    Auf der Client Seite meldet ACamd folgendes:
    00:03:55.603: ACamd v0.6.2.0
    00:03:55.618: MD-API Version 01.02 - 1.06
    00:03:55.618: systems: registering CA system Cardclient, pri -15, ident 1000
    00:03:55.618: structloaders: registering loader cardclient config
    00:03:55.618: cardclients: registering cardclient Newcamd
    00:03:55.618: cardclients: registering cardclient Newcamd2
    00:03:55.618: cardclients: registering cardclient CCcamN
    00:03:55.618: cardclients: registering cardclient Radegast
    00:03:55.618: cardclients: registering cardclient Camd35
    00:03:55.618: structloaders: registering loader smartcard data
    00:03:55.618: systems: registering CA system SC-Irdeto, pri -10, ident 1001
    00:03:55.618: feature: using feature SMARTCARD
    00:03:55.618: registering Irdeto smartcard (id 49726474)
    00:03:55.618: systems: registering CA system SC-Seca, pri -10, ident 1002
    00:03:55.618: registering Seca smartcard (id 53656361)
    00:03:55.618: systems: registering CA system SC-Viaccess, pri -10, ident 1003
    00:03:55.618: registering Viaccess smartcard (id 56696173)
    00:03:55.618: systems: registering CA system SC-Conax, pri -10, ident 1004
    00:03:55.618: registering Conax smartcard (id 436f6e78)
    00:03:55.618: systems: registering CA system SC-Cryptoworks, pri -10, ident 1005
    00:03:55.618: registering Cryptoworks smartcard (id 4372576f)
    00:03:55.618: systems: registering CA system SC-Nagra, pri -10, ident 1006
    00:03:55.618: registering Nagra smartcard (id 4e616772)
    00:03:55.618: systems: registering CA system SC-NDS, pri -10, ident 1007
    00:03:55.618: registering NDS smartcard (id 56694732)
    00:03:55.618: Monitor listen on port 58104
    00:03:55.650: I:Ignore, CAID 0D95 with Provider 00000000
    00:03:55.650: I:Ignore, CAID 0B00 with Provider 00000000
    00:03:55.650: I:Ignore, CAID 1702 with Provider 00000000
    00:03:55.650: I:Ignore, CAID 1830 with Provider 00000000
    00:03:55.650: I:Ignore, CAID 1722 with Provider 00000000
    00:03:55.650: I:Ignore, CAID 1834 with Provider 00000000
    00:03:55.650: I:Ignore, CAID 09AF with Provider 00000000
    00:03:55.650: I:Ignore, CAID 09C4 with Provider 00000000
    00:03:55.650: I:Ignore, CAID 09C7 with Provider 00000000
    00:03:55.650: I:Ignore, CAID 1861 with Provider 00000000
    00:03:55.650: I:Ignore, CAID 1837 with Provider 00000000
    00:03:55.650: I:Ignore, CAID 0648 with Provider 00000000
    00:03:55.650: I:Ignore, CAID 09C4 with Provider 00000000
    00:03:55.650: I:Ignore, CAID 1833 with Provider 00000000
    00:03:55.650: P:preferred, CAID 0D05 with Provider 00000000
    00:03:55.650: P:preferred, CAID 0D05 with Provider 00000004
    00:03:55.650: Engine [MD-API]
    00:03:55.650: loading smartcard data from C:\Program Files (x86)\ProgDVB\Plugins\acamd 6.2.0\smartcard.conf
    00:03:55.650: loaded 0 smartcard data from C:\Program Files (x86)\ProgDVB\Plugins\acamd 6.2.0\smartcard.conf
    00:03:55.650: loading cardclient config from C:\Program Files (x86)\ProgDVB\Plugins\acamd 6.2.0\cardclient.conf
    00:03:55.650: cCardClientCCcamN::Init
    00:03:55.650: hostname=192.168.1.10 port=12000 emm=0 emmCaids 0000/0000
    00:03:55.650: CCcamN: username=testuser password=testpass softcam=No maxhops=5 configid=0
    00:03:55.774: CCcamN 0: Created client node 79************DE
    00:03:55.774: GetNodes for Conf 0
    00:03:55.774: client 'CCcamN' ready
    00:03:55.774: ** registered systems:
    00:03:55.774: ** SC-NDS (pri -10)
    00:03:55.774: ** SC-Nagra (pri -10)
    00:03:55.774: ** SC-Cryptoworks (pri -10)
    00:03:55.774: ** SC-Conax (pri -10)
    00:03:55.774: ** SC-Viaccess (pri -10)
    00:03:55.774: ** SC-Seca (pri -10)
    00:03:55.774: ** SC-Irdeto (pri -10)
    00:03:55.774: ** Cardclient (pri -15)
    00:03:55.774: no smartcard interface defined!
    00:04:00.022:
    00:04:00.022: Ch: 1001 - ORF1
    00:04:00.022: Programm crc: 1EDE7FC6
    00:04:00.022: I: 0D95:00000000
    00:04:00.022: I: 0648:00000000
    00:04:00.022: I: 1702:00000000
    00:04:00.022: I: 1833:00000000
    00:04:00.022: I: 09C4:00000000
    00:04:00.022: I: 0648:00000000
    00:04:00.022: I: 0D95:00000000
    00:04:00.022: I: 09C4:00000000
    00:04:00.022: I: 1833:00000000
    00:04:00.022: I: 1702:00000000
    00:04:00.022: PMT: ACamd_PMT.txt, search, not found PMT=03E9 (AND SID=32C9)
    00:04:00.022: P: 0D05:00000000
    00:04:00.022: 0x03E9 0x32C9 0x0D05 0x00000000 0x00C9 0x02BC 11110000
    00:04:00.062: I: 0D95:00000000
    00:04:00.062: I: 0648:00000000
    00:04:00.062: I: 1702:00000000
    00:04:00.062: I: 1833:00000000
    00:04:00.062: I: 09C4:00000000
    00:04:00.062: Incomming PackageSize [184]
    00:04:00.142: cCardClientCCcamN::Login
    00:04:00.142: connecting to 192.168.1.10:12000/tcp (192.168.1.10)
    00:04:00.142: CCcam login succeed
    00:04:00.152: CCcamN 0: 08 Command
    0008004828************5E322E312E3400000000000000
    000000000000000000000000000000000000000033313931
    000000000000000000000000000000000000000000000000
    00000000
    00:04:00.152: CCcamN 0: NodeID 28************5E, CCcam version 2.1.4 (build 3191)
    00:04:02.142: CCcamN 0: Try1 Share 00000064, CAID 0D05, Hops 0, NodeID 28************5E
    00:04:02.162: CCcamN 0: ECM [00C9][0D05/00000000] Pro (0.020)
    00:04:02.162: CCcamN 0: ECM [00C9][0D05/00000000] not able to decode
    00:04:05.143: CCcamN 0: Share Count(1)

    Hat jemand einen Hinweis / eine Idee warum ich auf Client Seite keine Entschlüsselung hinbekomme?

    Grüße,
    pac2002
     
    Zuletzt bearbeitet: 3. Juni 2013
    #1
  2. phantom

    Nervigen User Advertisement

  3. pitti3322
    Offline

    pitti3322 Freak

    Registriert:
    7. September 2010
    Beiträge:
    211
    Zustimmungen:
    80
    Punkte für Erfolge:
    28
    AW: ORF über DOSCam (Server) mittels ProgDVB und ACamd (Client)

    Fehlt in der oscam.server nicht der group Eintrag?

    Zitat von woanders ;)


     
    #2
  4. pac2002
    Offline

    pac2002 Newbie

    Registriert:
    2. Juni 2013
    Beiträge:
    16
    Zustimmungen:
    0
    Punkte für Erfolge:
    1
    AW: ORF über DOSCam (Server) mittels ProgDVB und ACamd (Client)

    Hallo zusammen,

    Danke für die Info bin jetzt durch probieren auch drauf gekommen :)
    In der oscam.server fehlte der Eintrag "group". Mit einer Zuweisung einer Group konnte sich mein Client nun verbinden.

    pac2002
     
    #3
  5. pitti3322
    Offline

    pitti3322 Freak

    Registriert:
    7. September 2010
    Beiträge:
    211
    Zustimmungen:
    80
    Punkte für Erfolge:
    28
    AW: ORF über DOSCam (Server) mittels ProgDVB und ACamd (Client)

    Schau mal einen Beitrag höher ;)
     
    #4
  6. Andi-Delia
    Offline

    Andi-Delia Newbie

    Registriert:
    9. November 2013
    Beiträge:
    2
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    AW: ORF über DOSCam (Server) mittels ProgDVB und ACamd (Client)

    Hallo. Ich hätte mal eine Frage. Ich habe doscam ( enigma2-plugin-softcams-doscam-pli_0.19-r0_mips32el.ipk ) und CCCAM 2.3 installiert. Ich möchte mit doscam ORF anschauen, geht aber nicht. ich muß immer den CCCam 2.3 im Menü "Softcam Setup" anwählen damit es geht. Kann man die ORF Programm nicht über doscam freischalten damit ich nicht immer um Setup umstellen muß.

    MFG
     
    #5
  7. pehedima
    Offline

    pehedima Moderator Digital Eliteboard Team

    Registriert:
    10. Dezember 2012
    Beiträge:
    7.102
    Zustimmungen:
    5.402
    Punkte für Erfolge:
    113
    AW: ORF über DOSCam (Server) mittels ProgDVB und ACamd (Client)

    ORF läuft über doscam problemlos!
    Erstellte bitte einen neuen Thread und hänge dort deine doscam Configs an.
    Gebe auch an in welchem Verzeichnis deine SoftCam.Key liegt!
     
    #6

Diese Seite empfehlen