burnhard_1979
Ist oft hier
- Registriert
- 19. Oktober 2009
- Beiträge
- 179
- Reaktionspunkte
- 7
- Punkte
- 38
hallo liebe Leute...
habe eine ältere 0d05 (Cryptoworks) Karte vom ORF - läuft einwandfrei mit CCcam und Smargo... aber über NewCS bekomme ich sie leider nicht zum laufen, leider kenne ich mich damit auch überhaupt nicht aus - wenn ich newcs starte bekomme ich folgende Meldungen:
[ 14:22:33 ] [ Box detect ] Box type 1 (General Boxtype - Generic)
[ 14:22:33 ] [ Config ] Irdeto EMM mode 0 SET on reader smargo
[ 14:22:33 ] [ Config ] Option <blockc0> for device 0 (smargo) not present, defaulting to NO
[ 14:22:33 ] [ Config ] Value in <ipk> for device 0 (smargo) is INVALID, skipping...
[ 14:22:33 ] [ Config ] Value in <ucpk> for device 0 (smargo) is INVALID, skipping...
[ 14:22:33 ] [ Config ] Pincode for device 0 (smargo): 0000
[ 14:22:33 ] [ Config ] /dev/ttyUSB0 ECM priority: round
[ 14:22:33 ] [ Chameleon2 ] Adding name myname on destination localhost (Realm: myShares) on port 1234 - 0x80dbb88 [ op ptr 0x80e1978 ]
[ 14:22:33 ] [ EMM Cache ] Initialising dynamic Cache
[ 14:22:33 ] [ ECM Cache ] Initialising dynamic Cache
[ 14:22:33 ] [ Loader ] Starting Telnet on port 1001
[ 14:22:33 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0
[ 14:22:33 ] [ Phoenix ] Opening device /dev/ttyUSB0
[ 14:22:33 ] [ Phoenix ] Setting Parity to: NONE
[ 14:22:33 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 14:22:33 ] [ Phoenix ] Setting Baud to standard 9600
[ 14:22:34 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0
[ 14:22:35 ] [ ATR ] T=0 1etu=50.46us Guardtime:12etu WWT:19200etu
[ 14:22:35 ] [ ATR ] Historical bytes: [A0] [C4] [03] [07] [8F] [F1] [90] [00]
[ 14:22:35 ] [ Loader ] Init Cryptoworks card
[ 14:22:35 ] [ Phoenix ] Setting Parity to: EVEN
[ 14:22:35 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 14:22:35 ] [ Phoenix ] Setting Baud to standard 9600
[ 14:22:41 ] [ Loader ] Card 0D00 on port /dev/ttyUSB0 failed
[ 14:22:41 ] [ Loader ] Starting Newcamd Server on port 15050
[ 14:22:41 ] [ Newcamd ] Newcamd thread Server started on port 15050
was mich verwundert ist, dass Card 0d00 angezeigt wird...hat hier jemand vielleicht zufällig eine passende Config für die ORF Cryptoworks karte?
Vielen Dank im Voraus, lg burnhard_1979
habe eine ältere 0d05 (Cryptoworks) Karte vom ORF - läuft einwandfrei mit CCcam und Smargo... aber über NewCS bekomme ich sie leider nicht zum laufen, leider kenne ich mich damit auch überhaupt nicht aus - wenn ich newcs starte bekomme ich folgende Meldungen:
[ 14:22:33 ] [ Box detect ] Box type 1 (General Boxtype - Generic)
[ 14:22:33 ] [ Config ] Irdeto EMM mode 0 SET on reader smargo
[ 14:22:33 ] [ Config ] Option <blockc0> for device 0 (smargo) not present, defaulting to NO
[ 14:22:33 ] [ Config ] Value in <ipk> for device 0 (smargo) is INVALID, skipping...
[ 14:22:33 ] [ Config ] Value in <ucpk> for device 0 (smargo) is INVALID, skipping...
[ 14:22:33 ] [ Config ] Pincode for device 0 (smargo): 0000
[ 14:22:33 ] [ Config ] /dev/ttyUSB0 ECM priority: round
[ 14:22:33 ] [ Chameleon2 ] Adding name myname on destination localhost (Realm: myShares) on port 1234 - 0x80dbb88 [ op ptr 0x80e1978 ]
[ 14:22:33 ] [ EMM Cache ] Initialising dynamic Cache
[ 14:22:33 ] [ ECM Cache ] Initialising dynamic Cache
[ 14:22:33 ] [ Loader ] Starting Telnet on port 1001
[ 14:22:33 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0
[ 14:22:33 ] [ Phoenix ] Opening device /dev/ttyUSB0
[ 14:22:33 ] [ Phoenix ] Setting Parity to: NONE
[ 14:22:33 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 14:22:33 ] [ Phoenix ] Setting Baud to standard 9600
[ 14:22:34 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0
[ 14:22:35 ] [ ATR ] T=0 1etu=50.46us Guardtime:12etu WWT:19200etu
[ 14:22:35 ] [ ATR ] Historical bytes: [A0] [C4] [03] [07] [8F] [F1] [90] [00]
[ 14:22:35 ] [ Loader ] Init Cryptoworks card
[ 14:22:35 ] [ Phoenix ] Setting Parity to: EVEN
[ 14:22:35 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 14:22:35 ] [ Phoenix ] Setting Baud to standard 9600
[ 14:22:41 ] [ Loader ] Card 0D00 on port /dev/ttyUSB0 failed
[ 14:22:41 ] [ Loader ] Starting Newcamd Server on port 15050
[ 14:22:41 ] [ Newcamd ] Newcamd thread Server started on port 15050
was mich verwundert ist, dass Card 0d00 angezeigt wird...hat hier jemand vielleicht zufällig eine passende Config für die ORF Cryptoworks karte?
Vielen Dank im Voraus, lg burnhard_1979
