Millenium Oscam

[Dr.Nobody]

AW: Millenium Oscam

Ohne Configs wird das nur ein Ratespiel :emoticon-0105-wink:

Dr.Nobody

 

[adventure]

AW: Millenium Oscam

die configs hastd u doch oder wenn du meinst dass es läuft!

 

[Dr.Nobody]

AW: Millenium Oscam

Ich meine nicht nur das es läuft, ich weiß es, da ich es gerade getestet habe :emoticon-0105-wink:

Du musst dich Anmelden oder Registrieren um den Inhalt der Codes zu sehen!

oscam.server

Du musst dich Anmelden oder Registrieren um den Inhalt der Codes zu sehen!

Dr.Nobody

 

[adventure]

AW: Millenium Oscam

ich auch und rennt super aber


[reader]
label = mill
protocol = internal
device = /dev/sci1
services = mill
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2

 

[kusselin]

AW: Millenium Oscam

Hallo Zusammen,

ich habe auch noch ne Mille und in der Duo im oberen schacht mit Scam laufen die schweizer. Jetzt will ich im INterne reader oben der duo die mille mit Oscam betreiben aktuell diese: OSCam r10491..wenn ich die Oscam.server von dr. nobody nehme also diese:

Du musst dich Anmelden oder Registrieren um den Inhalt der Codes zu sehen!

klappts net...es kommt folgende Meldung:

• 015/02/15 15:38:52 77B0E6B8 c (-) -- Skipped 13 duplicated log lines --
• 2015/02/15 15:38:52 77B0E6B8 c (dvbapi) Demuxer #0 added new ecmpid #0 CAID: 0500 ECM_PID: 02CF PROVID: 023800
• 2015/02/15 15:38:52 77B0E6B8 c (dvbapi) Demuxer #0 added new ecmpid #1 CAID: 0500 ECM_PID: 02D9 PROVID: 040810
• 2015/02/15 15:38:52 77B0E6B8 c (dvbapi) Demuxer #0 added new ecmpid #2 CAID: 0500 ECM_PID: 02E3 PROVID: 050800
• 2015/02/15 15:38:52 77B0E6B8 c (dvbapi) Demuxer #0 added stream to ecmpid #1 CAID: 0500 ECM_PID: 02D9 PROVID: 040810
• 2015/02/15 15:38:52 77B0E6B8 c (dvbapi) Demuxer #0 added stream to ecmpid #2 CAID: 0500 ECM_PID: 02E3 PROVID: 050800
• 2015/02/15 15:38:52 77B0E6B8 c (dvbapi) Demuxer #0 added stream to ecmpid #0 CAID: 0500 ECM_PID: 02CF PROVID: 023800
• 2015/02/15 15:38:52 77B0E6B8 c (dvbapi) Demuxer #0 added stream to ecmpid #2 CAID: 0500 ECM_PID: 02E3 PROVID: 050800
• 2015/02/15 15:38:52 77B0E6B8 c (dvbapi) Demuxer #0 added stream to ecmpid #1 CAID: 0500 ECM_PID: 02D9 PROVID: 040810
• 2015/02/15 15:38:52 77B0E6B8 c (dvbapi) Demuxer #0 added stream to ecmpid #0 CAID: 0500 ECM_PID: 02CF PROVID: 023800
• 2015/02/15 15:38:52 77B0E6B8 c (dvbapi) Demuxer #0 added stream to ecmpid #1 CAID: 0500 ECM_PID: 02D9 PROVID: 040810
• 2015/02/15 15:38:52 77B0E6B8 c (dvbapi) Demuxer #0 added stream to ecmpid #0 CAID: 0500 ECM_PID: 02CF PROVID: 023800
• 2015/02/15 15:38:52 77B0E6B8 c (dvbapi) Demuxer #0 added stream to ecmpid #2 CAID: 0500 ECM_PID: 02E3 PROVID: 050800
• 2015/02/15 15:38:52 77B0E6B8 c (dvbapi) Demuxer #0 found 3 ECMpids and 6 STREAMpids in PMT
• 2015/02/15 15:38:52 77B0E6B8 c (dvbapi) Demuxer #0 receiver wants to demux srvid 4332 on adapter 0000 camask 0001 index 0000 pmtpid 01FF
• 2015/02/15 15:38:52 77B0E6B8 c (dvbapi) Demuxer #0 new program number: 4332 (0500:4332 unknown) [pmt_list_management 3]
• 2015/02/15 15:38:52 77B0E6B8 c (dvbapi) Demuxer #0 no suitable readers found that can be used for decoding!
• 2015/02/15 15:38:55 77B0E6B8 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2015/02/15 15:39:54 77B0E6B8 c (-) -- Skipped 19 duplicated log lines --
• 2015/02/15 15:40:55 77B0E6B8 c (-) -- Skipped 20 duplicated log lines --
• 2015/02/15 15:41:55 77B0E6B8 c (-) -- Skipped 20 duplicated log lines --
• 2015/02/15 15:42:55 77B0E6B8 c (-) -- Skipped 20 duplicated log lines --

wer kann mir helfen und muss ich noch was in die DVapi eintragen?

Gruss

 

[MatthiasDVB]

AW: Millenium Oscam

Ich schliesse mich mal an, ich habe eine SRF 5.0 Karte, also neuste Generation.
Wenn ich Diese in OSCAM starte, wird die karte prima erkannt, 1 Entitlement wird gezeigt,
aber das Bild bleibt dunkel.
Es kommt :

.....

• 2015/02/16 22:05:42 0 s (reader) CAID_0500_SRF_5.0 [internal] creating thread for device /dev/sci1
• 2015/02/16 22:05:42 0 s (main) waiting for local card init
• 2015/02/16 22:05:42 56E318 r (reader) CAID_0500_SRF_5.0 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
• 2015/02/16 22:05:42 56E318 r (reader) CAID_0500_SRF_5.0 [internal] Reader sci internal, detected box type: vuultimo
• 2015/02/16 22:05:43 56E318 r (reader) CAID_0500_SRF_5.0 [internal] card detected
• 2015/02/16 22:05:43 56E318 r (reader) CAID_0500_SRF_5.0 [internal] ATR: 3F 77 18 00 00 C2 EB 41 02 6C 90 00
• 2015/02/16 22:05:48 56E318 r (reader) CAID_0500_SRF_5.0 [internal] Buffers readed 0 bytes total time_us 4999466
• 2015/02/16 22:05:48 56E318 r (reader) CAID_0500_SRF_5.0 [internal] Init card protocol T0, FI=1, F=372, D=12, N=0
• 2015/02/16 22:05:48 56E318 r (reader) CAID_0500_SRF_5.0 [internal] Calculated work ETU is 6.89 us reader mhz = 450
• 2015/02/16 22:05:53 56E318 r (reader) CAID_0500_SRF_5.0 [internal] Buffers readed 0 bytes total time_us 4999212
• 2015/02/16 22:05:54 56E318 r (reader) CAID_0500_SRF_5.0 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
• 2015/02/16 22:05:55 56E318 r (reader) CAID_0500_SRF_5.0 [internal] using ecm #70b for long viaccess ecm
• 2015/02/16 22:05:55 56E318 r (reader) CAID_0500_SRF_5.0 [internal] type: Viaccess (non-standard atr), caid: 0500, serial: ##########
• 2015/02/16 22:05:56 56E318 r (reader) CAID_0500_SRF_5.0 [internal] providers: 6 (FFF430,050800,050810,050820,050830,050840)
• 2015/02/16 22:05:56 56E318 r (reader) CAID_0500_SRF_5.0 [internal] ready for requests
• 2015/02/16 22:05:56 56E318 r (reader) CAID_0500_SRF_5.0 [internal] found card system viaccess
• 2015/02/16 22:05:56 56E318 r (reader) CAID_0500_SRF_5.0 [viaccess] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2015/02/16 22:05:56 56E318 r (reader) CAID_0500_SRF_5.0 [viaccess] card detected
• 2015/02/16 22:05:56 56E318 r (reader) CAID_0500_SRF_5.0 [viaccess] serial: ##########
• 2015/02/16 22:05:56 56E318 r (reader) CAID_0500_SRF_5.0 [viaccess] provider: 1, id: ####################, sa: ########, geo: empty
• 2015/02/16 22:05:56 56E318 r (reader) CAID_0500_SRF_5.0 [viaccess] provider: 2, id: ####################, sa: ########, geo: FF FF FF FF
• 2015/02/16 22:05:57 56E318 r (reader) CAID_0500_SRF_5.0 [viaccess] provider: 3, id: ######################, sa: ########, geo: FF FF FF FF
• 2015/02/16 22:05:57 56E318 r (reader) CAID_0500_SRF_5.0 [viaccess] class: 02, expiry date: 2015/01/05 - 2015/02/19
• 2015/02/16 22:05:57 56E318 r (reader) CAID_0500_SRF_5.0 [viaccess] provider: 4, id: ######################, sa: ########, geo: FF FF FF FF
• 2015/02/16 22:05:57 56E318 r (reader) CAID_0500_SRF_5.0 [viaccess] provider: 5, id: ######################, sa: ########, geo: FF FF FF FF
• 2015/02/16 22:05:57 56E318 r (reader) CAID_0500_SRF_5.0 [viaccess] provider: 6, id: ######################, sa: ########, geo: FF FF FF FF
• 2015/02/16 22:05:58 0 s (main) init for all local cards done
• 2015/02/16 22:05:58 0 s (emmcache) loaded 0 emmcache records from /var/tuxbox/config/oscam.emmcache in 0 ms
• 2015/02/16 22:05:58 0 s (emmcache) loaded 0 emmstat records from /var/tuxbox/config/oscam.emmstat in 0 ms
• 2015/02/16 22:05:58 0 s (anticasc) anti cascading disabled
• 2015/02/16 22:05:58 56F3F8 c (client) plain dvbapi-client granted (local, au=auto (3 reader))
• 2015/02/16 22:05:58 56F3F8 c (dvbapi) dvbapi channelcache loaded from /var/tuxbox/config/oscam.ccache
• 2015/02/16 22:05:58 56F3F8 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
• 2015/02/16 22:06:03 56F3F8 c (dvbapi) Demuxer #0 added new ecmpid #0 CAID: 0500 ECM_PID: 02CF PROVID: 023800
• 2015/02/16 22:06:03 56F3F8 c (dvbapi) Demuxer #0 added new ecmpid #1 CAID: 0500 ECM_PID: 02D9 PROVID: 040810
• 2015/02/16 22:06:03 56F3F8 c (dvbapi) Demuxer #0 added new ecmpid #2 CAID: 0500 ECM_PID: 02E3 PROVID: 050800
• 2015/02/16 22:06:03 56F3F8 c (dvbapi) Demuxer #0 added stream to ecmpid #1 CAID: 0500 ECM_PID: 02D9 PROVID: 040810
• 2015/02/16 22:06:03 56F3F8 c (dvbapi) Demuxer #0 added stream to ecmpid #2 CAID: 0500 ECM_PID: 02E3 PROVID: 050800
• 2015/02/16 22:06:03 56F3F8 c (dvbapi) Demuxer #0 added stream to ecmpid #0 CAID: 0500 ECM_PID: 02CF PROVID: 023800
• 2015/02/16 22:06:03 56F3F8 c (dvbapi) Demuxer #0 added stream to ecmpid #2 CAID: 0500 ECM_PID: 02E3 PROVID: 050800
• 2015/02/16 22:06:03 56F3F8 c (dvbapi) Demuxer #0 added stream to ecmpid #1 CAID: 0500 ECM_PID: 02D9 PROVID: 040810
• 2015/02/16 22:06:03 56F3F8 c (dvbapi) Demuxer #0 added stream to ecmpid #0 CAID: 0500 ECM_PID: 02CF PROVID: 023800
• 2015/02/16 22:06:03 56F3F8 c (dvbapi) Demuxer #0 added stream to ecmpid #1 CAID: 0500 ECM_PID: 02D9 PROVID: 040810
• 2015/02/16 22:06:03 56F3F8 c (dvbapi) Demuxer #0 added stream to ecmpid #0 CAID: 0500 ECM_PID: 02CF PROVID: 023800
• 2015/02/16 22:06:03 56F3F8 c (dvbapi) Demuxer #0 added stream to ecmpid #2 CAID: 0500 ECM_PID: 02E3 PROVID: 050800
• 2015/02/16 22:06:03 56F3F8 c (dvbapi) Demuxer #0 found 3 ECMpids and 6 STREAMpids in PMT
• 2015/02/16 22:06:03 56F3F8 c (dvbapi) Demuxer #0 receiver wants to demux srvid 4332 on adapter 0000 camask 0001 index 0000 pmtpid 01FF
• 2015/02/16 22:06:03 56F3F8 c (dvbapi) Demuxer #0 new program number: 4332 (0500:4332 unknown) [pmt_list_management 3]
• 2015/02/16 22:06:03 56F3F8 c (dvbapi) Demuxer #0 no suitable readers found that can be used for decoding!
• 2015/02/16 22:06:06 56F3F8 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!

Wie man also sieht, No matching readers.
Die Karte ist aber "Ready for requests".
Was geht da schief, kennt sich jemand mit der SRF Karte aus ?

 

[Dr.Nobody]

AW: Millenium Oscam

Arbeitet ihr mit den "services" ? Sind die entsprechenden Einträge in den Configfiles auch Vorhanden (oscam.services, oscam.srvid) ? Was ist mit dvbapi Eintrag ?
Und auch daran denken einen Neustart durchzuführen.

Gruß
Nobody