Corum
Newbie
Habe folgendes Problem.
Betreibe einen NewCS Server auf meinem Qnap Nas. Dort sind vier User angemeldet. 1 x Lokal und 3 x Internet.
Betreibe eine MTV Unlimited Karte.
Lokal und 1 x Internet funktionert es ohne Probleme. Also immer ok ECM.
Muss dazu sagen, das beide über eine Dreambox ccam zugreifen.
Bei den anderen geht es nicht. Bekommen immer bd ECM Meldungen.
Hat aber bis kurzem funktioniert. Habe nichts geändert.
Beide sind Vserver und keine Client boxen.
Hier mal ein Log wo es funktionert:
[ 21:58:39 ] [ Conax ] Status Word from Card: 9000
[ 21:58:39 ] [ Conax ] CW2: 1790983F1ED66A5E
[ 21:58:39 ] [ Conax ] CW1: D2BA16A270E6E73D
[ 21:58:39 ] [ Conax ] Viewing status: 4000
[ 21:58:39 ] Card reader unlocked for reader Phoenix on Com1 [/dev/usb/ttyUSB0]
[ 21:58:39 ] [ 0B00 ] Card ECM took: 0s 345099us
[ 21:58:39 ] [ Newcamd ] ECM -> cheesy (OK) 0B00 0000 6FF1
[ 21:58:39 ] [ SID ] Updating SID 6FF1 for Reader 0 (Phoenix on Com1) ok - SO is: 0
[ 21:58:39 ] [ SID ] Adding SID 6FF1 on Reader 0 (Phoenix on Com1) - SO is: 0 [Allow]
[ 21:58:39 ] [ ECM Cache ] Adding dynamic Cache entry at 1
[ 21:58:39 ] [ ECM Cache ] Hits 0 Total 4
[ 21:58:39 ] [ 0B00 ] Ecm Cache Add took: 0s 434us
[ 21:58:43 ] [ Newcamd:34001 ] Command 81 from cheesy len 93
[ 21:58:43 ] [ Newcamd:34001 ] ECM <- cheesy
[ 21:58:43 ] [ SID ] Checking for SID 6FF1 for Reader 0 (Phoenix on Com1) - SO is: 0
[ 21:58:43 ] [ Newcamd:34001 ] Accepted SID 6FF1 on Reader 0 (Phoenix on Com1) from cheesy
[ 21:58:43 ] [ ECM Cache ] Hits 0 Total 5 [CRC 0DEE5645] - returning -999
[ 21:58:43 ] [ 0B00 ] Ecm Cache Check took: 0s 259us [CRC 0dee5645]
[ 21:58:43 ] [ Card queue /dev/usb/ttyUSB0 ] ECM added, sid 6FF1, prio 14
[ 21:58:43 ] [ Card queue /dev/usb/ttyUSB0 ] Ecm run, sid 6FF1, prio 14, queue len: 1, max len: 1
[ 21:58:43 ] [ ECM Cache ] Hits 0 Total 5 [CRC 0DEE5645] - returning -999
[ 21:58:43 ] [ 0B00 ] Ecm Cache Check took: 0s 231us [CRC 0dee5645]
Wo es nicht funktionert:
[ 21:56:38 ] [ Conax ] Status Word from Card: 9012
[ 21:56:38 ] [ Conax ] Viewing status: 0000
[ 21:56:38 ] Card reader unlocked for reader Phoenix on Com1 [/dev/usb/ttyUSB0]
[ 21:56:38 ] [ 0B00 ] Card ECM took: 0s 180080us
[ 21:56:38 ] [ Newcamd ] ECM -> gast2 (NOT OK) 0B00 0000 001B
[ 21:56:38 ] [ SID ] Updating SID 001B for Reader 0 (Phoenix on Com1) bad - SO is: 0
[ 21:56:38 ] [ SID ] Adding SID 001B on Reader 0 (Phoenix on Com1) - SO is: 0 [Allow]
[ 21:56:38 ] [ ECM Cache ] Adding dynamic Cache entry at 2
[ 21:56:38 ] [ ECM Cache ] Hits 0 Total 3
[ 21:56:38 ] [ 0B00 ] Ecm Cache Add took: 0s 438us
Von euch einer eine Idee. Hab schon alles mögliche probiert.
Danke schon einmal
Betreibe einen NewCS Server auf meinem Qnap Nas. Dort sind vier User angemeldet. 1 x Lokal und 3 x Internet.
Betreibe eine MTV Unlimited Karte.
Lokal und 1 x Internet funktionert es ohne Probleme. Also immer ok ECM.
Muss dazu sagen, das beide über eine Dreambox ccam zugreifen.
Bei den anderen geht es nicht. Bekommen immer bd ECM Meldungen.
Hat aber bis kurzem funktioniert. Habe nichts geändert.
Beide sind Vserver und keine Client boxen.
Hier mal ein Log wo es funktionert:
[ 21:58:39 ] [ Conax ] Status Word from Card: 9000
[ 21:58:39 ] [ Conax ] CW2: 1790983F1ED66A5E
[ 21:58:39 ] [ Conax ] CW1: D2BA16A270E6E73D
[ 21:58:39 ] [ Conax ] Viewing status: 4000
[ 21:58:39 ] Card reader unlocked for reader Phoenix on Com1 [/dev/usb/ttyUSB0]
[ 21:58:39 ] [ 0B00 ] Card ECM took: 0s 345099us
[ 21:58:39 ] [ Newcamd ] ECM -> cheesy (OK) 0B00 0000 6FF1
[ 21:58:39 ] [ SID ] Updating SID 6FF1 for Reader 0 (Phoenix on Com1) ok - SO is: 0
[ 21:58:39 ] [ SID ] Adding SID 6FF1 on Reader 0 (Phoenix on Com1) - SO is: 0 [Allow]
[ 21:58:39 ] [ ECM Cache ] Adding dynamic Cache entry at 1
[ 21:58:39 ] [ ECM Cache ] Hits 0 Total 4
[ 21:58:39 ] [ 0B00 ] Ecm Cache Add took: 0s 434us
[ 21:58:43 ] [ Newcamd:34001 ] Command 81 from cheesy len 93
[ 21:58:43 ] [ Newcamd:34001 ] ECM <- cheesy
[ 21:58:43 ] [ SID ] Checking for SID 6FF1 for Reader 0 (Phoenix on Com1) - SO is: 0
[ 21:58:43 ] [ Newcamd:34001 ] Accepted SID 6FF1 on Reader 0 (Phoenix on Com1) from cheesy
[ 21:58:43 ] [ ECM Cache ] Hits 0 Total 5 [CRC 0DEE5645] - returning -999
[ 21:58:43 ] [ 0B00 ] Ecm Cache Check took: 0s 259us [CRC 0dee5645]
[ 21:58:43 ] [ Card queue /dev/usb/ttyUSB0 ] ECM added, sid 6FF1, prio 14
[ 21:58:43 ] [ Card queue /dev/usb/ttyUSB0 ] Ecm run, sid 6FF1, prio 14, queue len: 1, max len: 1
[ 21:58:43 ] [ ECM Cache ] Hits 0 Total 5 [CRC 0DEE5645] - returning -999
[ 21:58:43 ] [ 0B00 ] Ecm Cache Check took: 0s 231us [CRC 0dee5645]
Wo es nicht funktionert:
[ 21:56:38 ] [ Conax ] Status Word from Card: 9012
[ 21:56:38 ] [ Conax ] Viewing status: 0000
[ 21:56:38 ] Card reader unlocked for reader Phoenix on Com1 [/dev/usb/ttyUSB0]
[ 21:56:38 ] [ 0B00 ] Card ECM took: 0s 180080us
[ 21:56:38 ] [ Newcamd ] ECM -> gast2 (NOT OK) 0B00 0000 001B
[ 21:56:38 ] [ SID ] Updating SID 001B for Reader 0 (Phoenix on Com1) bad - SO is: 0
[ 21:56:38 ] [ SID ] Adding SID 001B on Reader 0 (Phoenix on Com1) - SO is: 0 [Allow]
[ 21:56:38 ] [ ECM Cache ] Adding dynamic Cache entry at 2
[ 21:56:38 ] [ ECM Cache ] Hits 0 Total 3
[ 21:56:38 ] [ 0B00 ] Ecm Cache Add took: 0s 438us
Von euch einer eine Idee. Hab schon alles mögliche probiert.
Danke schon einmal