AW: KPCS Tutorial
kpcs.conf
[global]
Nice = -1
ClientTimeout = 6
serialreadertimeout=4
ClientMaxIdle = 60
CacheDelay = 0
FallbackTimeout = 1
BindWait = 10
ResolveDelay = 10
DyndnsInterval = 120
LogUDP = 255.255.255.255,12345
LogFile = stdout
#PidFile = /tmp/my.pid
#MaxLogSize = 102400
showecmdw = 0
showemmdw = 0
Filter = 1500
ReaderAlarm = 1
WaitCards=0
[newcamd]
Key = 0102030405060708091011121314
Port = 10001@0D08:0014,0018,001C,0020
# -- camd 3.5x ----------------------------------------------------------------
# Port : Port-Number (0 disables this protocol)
# ServerIP : bind service to ONE dedicated ip-address
# -----------------------------------------------------------------------------
#[cs378x]
#Port = 54343
#[cs357x]
#Port = 55443
#[cccam]
#port = 12000
#reshare = 1
#version = 2.1.4
kpcs.reader
#[reader]
#label = myccam
#protocol = cccam
#device = 192.168.0.1,1231
#account = login,password
#group = 1
#maxhop = 3
#[reader]
#blockemm = C0,03,02
#blockua = 1
#blockga = 1
#blocksa = 1
#AU = 1
#Enable = 1
#Label = mycard
#Protocol = mouse
#Device = /dev/ttyS0
##pincode = 7291
##boxid = 09090909 <--- for NDS
#boxkey = 00...00 <--- for Nagra
#rsakey = 33..333 <--- for Nagra
#camkey = 33..333 <--- irdeto
#camdata = 33..333 <--- irdeto
##BaudRate = 16000 <--- 9600/orignalMhz * NewMhz
##bits = 7/8
##stopbits = 1/2
##parity = odd/even/none
##flowcontrol= hard/soft/none
#EMMCache = 1,1,10
#Detect = CD
#Group = 1,2,3
#Fallback = 0
#AutoSID = 1 <--- default is 0
#CAID = 1702,1833 <--- allow caid to card
#ChID = 0604:02,03,04,05,06,07,0E
#ecmlen = 120,90-97,124 <- IN DECIMAL !!!NOT hex
#clientid = mg <-- for newcamd only, can be set any client cccam,mgcamd,camd3,evocam,octagon adn so on
#
##===========================================================
## EMM over cascading
#[reader]
#Label = mynewcamd
#Protocol = newcamd
#Key = 0102030405060708091011121314
#Device = 11.11.12.12,1000
#Account = ddds,2212
#Fallback = 1
#Group = 1
#CAID = 0604
#ChID = 0604:02,03,04,06,07
#InactivityTimeout = 2
#EMMCache = 1,1,10
#blockua = 0
#blockga = 0
#blocksa = 0
#AU = 1
#
##===========================================================
#[reader]
#Label = mycamd
#Protocol = camd35
#Device = 198.297.82.21,38463
#Account = eee,333
#Fallback = 0
#Group = 1
##CAID = 0D06,0919,0960,0961
kpcs.user
#.user is auto reload... when make changes to file ...server relaod automaticly not need restart
[account]
User = user
Pwd = 54546
# 0 1 2 3
# 0 - disable
# 1 - per IP
# 2 - 1 user per Port
# 3 - only 1 user allow for all port
# 10 - spider per IP
# 20 - spider 1 user per Port
# 30 - spider only 1 user allow for all port
Uniq = 1
Group = 1
#AU disable
AU = 0
# this is auto AU reader
#AU = 1
#AU single reader
#AU = bulsat
#EndDate = 2009-01-05
#or both are ok
#EndDate = 2009/01/05
#CAID = 0604,093B
#IDENT = 0500:020710,021500;090F:0