1. Diese Seite verwendet Cookies. Wenn du dich weiterhin auf dieser Seite aufhältst, akzeptierst du unseren Einsatz von Cookies. Weitere Informationen

Problem KabelBW Sender werden hell - Sky funktioniert nicht und bleiben dunkel

Dieses Thema im Forum "CS CCcam" wurde erstellt von BaNaNaBeck, 17. März 2012.

  1. BaNaNaBeck
    Offline

    BaNaNaBeck VIP

    Registriert:
    7. Februar 2008
    Beiträge:
    2.967
    Zustimmungen:
    3.028
    Punkte für Erfolge:
    113
    Beruf:
    Zerstörer
    Ort:
    Überall und Nirgendwo
    Hallo zusammen,

    ich habe das Problem, dass die KabelBW Sender funktionieren, aber alle Sender aus dem SKY Paket dunkel bleiben. Ich hab unten mal das Logfile im Spoiler geposted.

    Als Client dient eine DM800 SE mit CCcam 2.1.3

    Was mich wundert sind die Errors die angezeigt werden obwohl von Serverseite aus alles funktioniert. Bei anderen Clienten werden alle Sender inkl. SKY hell. An was kann das liegen?

    Code:
    root@dm800se:/usr/bin# CCcam_2.1.3 -d
    00:11:07.822 CCcam: ======================================================================
    00:11:07.823 CCcam: starting CCcam 2.1.3 compiled on Nov 14 2009@00:37:55
    00:11:07.823 CCcam: ======================================================================
    00:11:07.823 CCcam: online using nodeId XXXXXXXXXXXX
    00:11:07.826 CCcam: Server disabled
    00:11:07.827 CCcam: dvb api3 detected
    00:11:07.828 CCcam: DM8000 detected
    00:11:07.828 CCcam: create 8 cam device(s)
    00:11:08.032 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
    00:11:08.032 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
    00:11:08.032 CCcam: static cw not found or bad
    00:11:08.032 CCcam: parsed 0 entries from /var/etc/CCcam.prio
    00:11:08.032 CCcam: readProviderfile: cannot open /var/etc/CCcam.providers or not found
    00:11:08.033 CCcam: readChannelList: cannot open /var/etc/CCcam.channelinfo or not found
    
    
    [B]START AUF ARD[/B]
    
    00:11:11.307 CCcam: cam[0] set PMT for sid=2b5c
    00:11:11.307 CCcam: start EMM
    00:11:11.324 CCcam: EMM demux 1 set
    00:11:11.325 CCcam: EMM: not interested in 098E:000000
    00:11:32.550 CCcam: enigma interface: disconnected (0)
    
    
    [B]UMSCHALTEN AUF EINEN KABEL BW SENDER[/B]
    Server zeigt an alles Okay - und der Sender wird hell! :emoticon-0178-rock:
    [IMG]http://www.abload.de/img/545450dx43.jpg[/IMG]
    
    00:11:33.223 CCcam: found nds caid: 0x98e ecmpid: 0x1e59 id: 0x0
    00:11:33.223 CCcam: cam[0] set PMT for sid=567c
    00:11:33.223 CCcam: start EMM
    00:11:33.253 CCcam: EMM demux 1 set
    00:11:33.253 CCcam: EMM: not interested in 098E:000000
    00:11:33.300 CCcam: remote ecm -> XXX.XXX.XXX.XXX:12002 0x98e(0x000)
    00:11:33.460 CCcam: remote ecm <- XXX.XXX.XXX.XXX:12002 ok (took nan seconds)
    00:11:33.461 CCcam: cam[0] ecm even ok caid:0x98e id:0x0 pid:0x1e59 Unknown (took nan seconds)
    00:11:33.900 CCcam: remote ecm -> XXX.XXX.XXX.XXX:12002 0x98e(0x000)
    00:11:34.062 CCcam: remote ecm <- XXX.XXX.XXX.XXX:12002 ok (took nan seconds)
    00:11:34.063 CCcam: cam[0] ecm odd ok caid:0x98e id:0x0 pid:0x1e59 Unknown (took nan seconds)
    00:11:43.918 CCcam: remote ecm -> XXX.XXX.XXX.XXX:12002 0x98e(0x000)
    00:11:44.075 CCcam: remote ecm <- XXX.XXX.XXX.XXX:12002 ok (took nan seconds)
    00:11:44.076 CCcam: cam[0] ecm even ok caid:0x98e id:0x0 pid:0x1e59 Unknown (took nan seconds)
    00:11:53.936 CCcam: remote ecm -> XXX.XXX.XXX.XXX:12002 0x98e(0x000)
    00:11:54.108 CCcam: remote ecm <- XXX.XXX.XXX.XXX:12002 ok (took nan seconds)
    00:11:54.109 CCcam: cam[0] ecm odd ok caid:0x98e id:0x0 pid:0x1e59 Unknown (took nan seconds)
    00:11:59.631 CCcam: enigma interface: disconnected (0)
    
    [B]
    UMSCHALTEN AUF EINEN SKY SENDER[/B]
    Server zeigt an alles Okay - und der Sender bleibt dunkel! :emoticon-0106-cryin
    [IMG]http://www.abload.de/img/1234561hy76.jpg[/IMG]
    
    00:12:00.057 CCcam: found nds caid: 0x98e ecmpid: 0x1e5c id: 0x0
    00:12:00.057 CCcam: cam[0] set PMT for sid=e
    00:12:00.057 CCcam: start EMM
    00:12:00.135 CCcam: EMM demux 1 set
    00:12:00.135 CCcam: EMM: not interested in 098E:000000
    00:12:00.163 CCcam: remote ecm -> XXX.XXX.XXX.XXX:12002 0x98e(0x000)
    00:12:00.320 CCcam: remote ecm <- XXX.XXX.XXX.XXX:12002 error (took nan seconds)
    00:12:00.321 CCcam: remote ecm -> XXX.XXX.XXX.XXX:12002 0x98e(0x000)
    00:12:00.501 CCcam: remote ecm <- XXX.XXX.XXX.XXX:12002 error (took nan seconds)
    00:12:00.501 CCcam: remote ecm -> XXX.XXX.XXX.XXX:12002 0x98e(0x000)
    00:12:00.685 CCcam: remote ecm <- XXX.XXX.XXX.XXX:12002 error (took nan seconds)
    00:12:00.685 CCcam: remote ecm -> XXX.XXX.XXX.XXX:12002 0x98e(0x000)
    00:12:00.959 CCcam: remote ecm <- XXX.XXX.XXX.XXX:12002 error (took nan seconds)
    00:12:00.959 CCcam: remote ecm -> XXX.XXX.XXX.XXX:12002 0x98e(0x000)
    00:12:01.311 CCcam: remote ecm <- XXX.XXX.XXX.XXX:12002 ok (took nan seconds)
    00:12:01.312 CCcam: cam[0] ecm even ok caid:0x98e id:0x0 pid:0x1e5c Unknown (took nan seconds)
    00:12:06.270 CCcam: remote ecm -> XXX.XXX.XXX.XXX:12002 0x98e(0x000)
    00:12:06.404 CCcam: remote ecm <- XXX.XXX.XXX.XXX:12002 ok (took nan seconds)
    00:12:06.404 CCcam: cam[0] ecm odd ok caid:0x98e id:0x0 pid:0x1e5c Unknown (took nan seconds)
    00:12:16.288 CCcam: remote ecm -> XXX.XXX.XXX.XXX:12002 0x98e(0x000)
    00:12:16.521 CCcam: remote ecm <- XXX.XXX.XXX.XXX:12002 ok (took nan seconds)
    00:12:16.521 CCcam: cam[0] ecm even ok caid:0x98e id:0x0 pid:0x1e5c Unknown (took nan seconds)
    00:12:26.305 CCcam: remote ecm -> XXX.XXX.XXX.XXX:12002 0x98e(0x000)
    00:12:26.434 CCcam: remote ecm <- XXX.XXX.XXX.XXX:12002 ok (took nan seconds)
    00:12:26.435 CCcam: cam[0] ecm odd ok caid:0x98e id:0x0 pid:0x1e5c Unknown (took nan seconds)
    00:12:36.323 CCcam: remote ecm -> XXX.XXX.XXX.XXX:12002 0x98e(0x000)
    00:12:36.465 CCcam: remote ecm <- XXX.XXX.XXX.XXX:12002 ok (took nan seconds)
    00:12:36.466 CCcam: cam[0] ecm even ok caid:0x98e id:0x0 pid:0x1e5c Unknown (took nan seconds)
    
    root@dm800se:/usr/bin#
     
    #1

Diese Seite empfehlen