Ich habe meins geschrottet!!

[xax2]

AW: Ich habe meins geschrottet!!

wäre es möglich, die Dateien auf der SD und arrancase kopieren, sich von der SD anstatt aus dem internen Speicher?

 

[60plus]

AW: Ich habe meins geschrottet!!

@xax2,

you need a cas3, and then please follow this post https://www.digital-eliteboard.com/showthread.php?209881-gel%F6st-MCA-geschrottet-bitte-lesen.



good luck


60plus

 

[xax2]

AW: Ich habe meins geschrottet!!

Du musst dich Anmelden oder Registrieren um den Inhalt der Angebote zu sehen!

Ich weiß nicht, ob ich diesen Thread zu verstehen. Ich verstehe, dass dieses Thema nur, um die CAM reparieren.
In meinem Fall ist das CAM-Modul ist in Ordnung. Ich habe versucht, Linux aufeinem anderen CAM-Modul, das funktioniert aber nicht gut zu starten setzen.

 

[dirtyharry123]

AW: Ich habe meins geschrottet!!

Hi xax2,

what happens, when you write this file (Link ist nicht mehr aktiv.) to an SD-Card using win32diskimager
and then try to boot from it (which leds light up?)

 

[xax2]

AW: Ich habe meins geschrottet!!

1 - alle LEDs leuchten.
2 - Blaue LED auf.
3 - LED blinkt blau.
4 - Rote LED auf.

 

[dirtyharry123]

AW: Ich habe meins geschrottet!!

Hi xax2,

please just write in english, using google-translate to post your answers is anything else but helpfull.
(BTW, where are you from if I may ask?)
The way you describe the LEDs indicates that your MCA does succesfully boot from the SD.
Have you tried flashing a "clean" image as desscribed here:
Ich habe meins geschrottet!!

dirtyharry123

 

[xax2]

AW: Ich habe meins geschrottet!!

Hi, i'm spanish. I've already tried that solution and the result is similar to this test.

complete firm from this post:
1 - all lights on.
2 - flashing blue LED lights
3 - blue LED lights flash faster.
4 - red LED light on.

 

[dirtyharry123]

AW: Ich habe meins geschrottet!!

Entonces, cuando no sabes como escribir algo en ingles tambien puedes decir en espanol, pero mejor en ingles porque la mayoria lo entienden.
Is this with the SD-card still inserted, or without SD?

 

[xax2]

AW: Ich habe meins geschrottet!!

Du musst dich Anmelden oder Registrieren um den Inhalt der Angebote zu sehen!

with SD card with full image to update.

if I connect the MATRIX without SD card, no LED lights.

- - - Aktualisiert - - -

I watched the mini SD slot but I have not seen anything unusual.

 

[dirtyharry123]

AW: Ich habe meins geschrottet!!

It does seem like there is a problem with your sd-slot,
nonetheless it should work using the sd-boot-fix.
You could try running the full-update once again, this time give it more time than usual (maybe around 30 minutes).
When the time has passed reinsert the MCA with the BOOT-FIX-SD-card.
If it still doesn't boot there could also be problems with the internal flash-memory (bad blocks).
However without a serial console connected it's hard to tell what's going on.
If you are not afraid of soldering you could try connecting a serial console and post the output.
Check this post here: Testberichte-Thread zur neuen Community-Firmware MCA_NG-0.1-339 - Seite 6

 

[xax2]

AW: Ich habe meins geschrottet!!

I tried again and it's always the same, fixed red light.
Soldering is no problem. I found this wiring diagram but I do not know how to connect, USB, serial, software..

.

 

[dirtyharry123]

AW: Ich habe meins geschrottet!!

You will need either a TTL<->RS232(COM)- or a TTL<->USB-Cable.
(Some of the older cellphone-cables work, IIRC I have a clone Siemens C25-USB-cable)
You should not connect 3.3V when using a USB-Cable (It most likely uses 5V)!
The settings are:
115200 (baudrate) 8(bits per char) N(No parity) 1(stop bit)
On Linux I use screen (screen /dev/ttyUSB0 115200),
on Windows I believe you can use putty.

 

[xax2]

AW: Ich habe meins geschrottet!!

I have an old cable usb to serial connector siemens (siemens DCA-540), takes the pl2303 chip.

Du musst dich Anmelden oder Registrieren um diesen link zusehen!

I recently bought a USB to serial db9, also carries the pl2303 chip.

Du musst dich Anmelden oder Registrieren um diesen link zusehen!

can serve or I have to share one like this?

Du musst dich Anmelden oder Registrieren um diesen link zusehen!

 

[dirtyharry123]

AW: Ich habe meins geschrottet!!

They should all work, mine is also being recognized as:
Prolific Technology, Inc. PL2303 Serial Port
I guess you will have to try.
Just remember to only connect GND, RX and TX.

 

[xax2]

AW: Ich habe meins geschrottet!!

you could put a picture of your connection?
I do not know what I have to connect wires to the cam.
I've been looking online and not sure if I did this scheme is correct.


- - - Aktualisiert - - -

this is my cable Siemens DCA-540, I do not know how to connect.