catweazel1000
Hacker
- Registriert
- 6. Februar 2009
- Beiträge
- 306
- Reaktionspunkte
- 7
- Punkte
- 78
Hallo,
habe nach Versuchen mit dem Poweboard-Image nun aufs aktuelle Zebradem 1xI Image gewechselt.
Habe eine Sagem-DBox2 mit Ahab2 und inzwischen angelöteter 5V-Spannung.
Habe dann aus der Datenbase die Anleitung für KabelBW und NDS gezogen und befolgt.
Allerdings blicke ich nicht ganz das anpassen der newcs.xml und der camd3.config.
Allerdings ist ja für die Funktion der Karte und der Multicam die camd3.config nicht nötig, oder ??
Nun hab ich wieder Unknown-Card. Kann mir jemand helfen ?????
Hier mein NewCS-Log:
ZebraDem Image 3.0 - Sagem D-BOX2 - Kernel 2.4.36.6-dbox2 (21:28:50)...
dbox login: root
BusyBox v1.7.2 (2008-10-24 03:50:00 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/var # cd emu
/var/emu # newcs
This is NewCS 1.50 - the New CardServer by Butter-team..
Compiled on Oct 26 2007 at 16:30:58
Reading Config file from /var/tuxbox/config/newcs.xml
No certificate specified in config, trying to look in current dir..
No certificate found, dependencies will be disabled..
TCP-log password is disabled!
TCP-log set to simple mode
level: normal
type: init
output: all
logger config: level 1 type 3 output 255
Console log options: level 1 type 3
log file:
logger: cant open file , file log disabled
udp log: host 192.168.1.10 port 1000
UDP log options: level 1 type 3
TCP log options: level 1 type 3
[ 21:31:19 ] [ Box detect ] Box type 4
[ 21:31:19 ] [ Config ] Enabling SSL engine
[ 21:31:19 ] [ Config ] SSL engine disabled due to Certificate errors
[ 21:31:19 ] [ Config ] Option <Seca-PPV> for device 0 (multicam) not present, d
efaulting to NO
[ 21:31:19 ] [ Config ] Value in <boxkey> for device 0 (multicam) is INVALID, sk
ipping...
[ 21:31:19 ] [ Config ] /dev/tts/1 ECM priority: round
[ 21:31:19 ] [ Config ] Option <spider> not present for User: cat, defaulting to
NO
[ 21:31:19 ] [ Config ] Option <spider> not present for User: , defaulting to NO
[ 21:31:19 ] [ EMM Cache ] Initialising Cache with 10 entries
[ 21:31:19 ] [ ECM Cache ] Initialising Cache with 10 entries
[ NewCS ] Process ID is: 285
[ 21:31:19 ] [ Loader ] Starting Telnet on port 3001
[ 21:31:19 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 21:31:19 ] [ Dbox ] Opening device /dev/tts/1
[ 21:31:20 ] [ Loader ] Unknown card
[ 21:31:20 ] [ Loader ] Trying Irdeto (T=14)
[ 21:31:20 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 21:31:20 ] [ Dbox ] Opening device /dev/tts/1
[ 21:31:22 ] [ Loader ] Unknown card
[ 21:31:22 ] [ NewCS ] Ready to GO!
/var/emu #
Hier meine NewCS:
<?xml version="1.0"?>
<!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around)
-->
<newCSconfig>
<readers name="Card Readers">
<device>
<name>multicam</name>
<type>dbox</type>
<node>/dev/tts/1</node>
<mhz>357</mhz> <!-- or 357 -->
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>0000000000</boxkey>
<PTShandshake>no</PTShandshake>
<crypto-special>no</crypto-special>
<carddetect>no</carddetect>
<newcamd_port>10110</newcamd_port>
<priority>round</priority> <!-- hard is default -->
<sid>
<allow>
<!-- valid value for id are:
4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->
<id></id>
</allow>
<deny>
<!-- valid value for id are:
4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->
<id></id>
</deny>
</sid>
</device>
</readers>
<radegastserver>
<!-- valid value for enable are:
0,1 - Enable or Disable radegast server. -->
<enabled>no</enabled>
<!-- valid value for port are:
0,65535 - Which port to listen for incomming connections. -->
<port>10001</port>
<!-- valid value for allow are:
ALL - Not active yet. -->
<allow>
<hostname>127.0.0.1</hostname>
</allow>
</radegastserver>
<cache>
<emm>10</emm>
<ecm>10</ecm>
</cache>
<debug>
<level>normal</level>
<type>init</type>
<output>all</output>
<logfile></logfile>
<console_options></console_options>
<file_options></file_options>
<udp_host>192.168.1.10</udp_host>
<udp_port>1000</udp_port>
<udp_options></udp_options>
<tcp_port>3001</tcp_port>
<tcp_options></tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<userfile></userfile>
<user>
<name>cat</name>
<password>1234</password>
<au>on</au>
</user>
<user>
<name></name>
<password></password>
<au>on</au>
</user>
<!-- Remove if you dont use reverse login -->
<user>
<name>User2</name>
<password>Pass2</password>
<hostname>localhost</hostname>
<port>12345</port>
<spider>yes</spider>
</user>
</newcamdserver>
</newCSconfig>
habe nach Versuchen mit dem Poweboard-Image nun aufs aktuelle Zebradem 1xI Image gewechselt.
Habe eine Sagem-DBox2 mit Ahab2 und inzwischen angelöteter 5V-Spannung.
Habe dann aus der Datenbase die Anleitung für KabelBW und NDS gezogen und befolgt.
Allerdings blicke ich nicht ganz das anpassen der newcs.xml und der camd3.config.
Allerdings ist ja für die Funktion der Karte und der Multicam die camd3.config nicht nötig, oder ??
Nun hab ich wieder Unknown-Card. Kann mir jemand helfen ?????
Hier mein NewCS-Log:
ZebraDem Image 3.0 - Sagem D-BOX2 - Kernel 2.4.36.6-dbox2 (21:28:50)...
dbox login: root
BusyBox v1.7.2 (2008-10-24 03:50:00 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/var # cd emu
/var/emu # newcs
This is NewCS 1.50 - the New CardServer by Butter-team..
Compiled on Oct 26 2007 at 16:30:58
Reading Config file from /var/tuxbox/config/newcs.xml
No certificate specified in config, trying to look in current dir..
No certificate found, dependencies will be disabled..
TCP-log password is disabled!
TCP-log set to simple mode
level: normal
type: init
output: all
logger config: level 1 type 3 output 255
Console log options: level 1 type 3
log file:
logger: cant open file , file log disabled
udp log: host 192.168.1.10 port 1000
UDP log options: level 1 type 3
TCP log options: level 1 type 3
[ 21:31:19 ] [ Box detect ] Box type 4
[ 21:31:19 ] [ Config ] Enabling SSL engine
[ 21:31:19 ] [ Config ] SSL engine disabled due to Certificate errors
[ 21:31:19 ] [ Config ] Option <Seca-PPV> for device 0 (multicam) not present, d
efaulting to NO
[ 21:31:19 ] [ Config ] Value in <boxkey> for device 0 (multicam) is INVALID, sk
ipping...
[ 21:31:19 ] [ Config ] /dev/tts/1 ECM priority: round
[ 21:31:19 ] [ Config ] Option <spider> not present for User: cat, defaulting to
NO
[ 21:31:19 ] [ Config ] Option <spider> not present for User: , defaulting to NO
[ 21:31:19 ] [ EMM Cache ] Initialising Cache with 10 entries
[ 21:31:19 ] [ ECM Cache ] Initialising Cache with 10 entries
[ NewCS ] Process ID is: 285
[ 21:31:19 ] [ Loader ] Starting Telnet on port 3001
[ 21:31:19 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 21:31:19 ] [ Dbox ] Opening device /dev/tts/1
[ 21:31:20 ] [ Loader ] Unknown card
[ 21:31:20 ] [ Loader ] Trying Irdeto (T=14)
[ 21:31:20 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 21:31:20 ] [ Dbox ] Opening device /dev/tts/1
[ 21:31:22 ] [ Loader ] Unknown card
[ 21:31:22 ] [ NewCS ] Ready to GO!
/var/emu #
Hier meine NewCS:
<?xml version="1.0"?>
<!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around
)-->
<newCSconfig>
<readers name="Card Readers">
<device>
<name>multicam</name>
<type>dbox</type>
<node>/dev/tts/1</node>
<mhz>357</mhz> <!-- or 357 -->
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>0000000000</boxkey>
<PTShandshake>no</PTShandshake>
<crypto-special>no</crypto-special>
<carddetect>no</carddetect>
<newcamd_port>10110</newcamd_port>
<priority>round</priority> <!-- hard is default -->
<sid>
<allow>
<!-- valid value for id are:
4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->
<id></id>
</allow>
<deny>
<!-- valid value for id are:
4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->
<id></id>
</deny>
</sid>
</device>
</readers>
<radegastserver>
<!-- valid value for enable are:
0,1 - Enable or Disable radegast server. -->
<enabled>no</enabled>
<!-- valid value for port are:
0,65535 - Which port to listen for incomming connections. -->
<port>10001</port>
<!-- valid value for allow are:
ALL - Not active yet. -->
<allow>
<hostname>127.0.0.1</hostname>
</allow>
</radegastserver>
<cache>
<emm>10</emm>
<ecm>10</ecm>
</cache>
<debug>
<level>normal</level>
<type>init</type>
<output>all</output>
<logfile></logfile>
<console_options></console_options>
<file_options></file_options>
<udp_host>192.168.1.10</udp_host>
<udp_port>1000</udp_port>
<udp_options></udp_options>
<tcp_port>3001</tcp_port>
<tcp_options></tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<userfile></userfile>
<user>
<name>cat</name>
<password>1234</password>
<au>on</au>
</user>
<user>
<name></name>
<password></password>
<au>on</au>
</user>
<!-- Remove if you dont use reverse login -->
<user>
<name>User2</name>
<password>Pass2</password>
<hostname>localhost</hostname>
<port>12345</port>
<spider>yes</spider>
</user>
</newcamdserver>
</newCSconfig>
Zuletzt bearbeitet:
