HDSC-Oscam-EMU-45-226-10082

[geromino]

Explanation of binaries:

• arm = Dockstar (Debian), Sheevaplug ...
• arm-coolstream = Coolstream
• fritz = Fritzbox
• mca = Matrix Air Cam (libcrypto static)
• mipsel = Mipsel Tuxbox (newer Dreams ...)
• mipsel-wdtv = Mipsel Tuxbox WDTV
• owrt24 = OpenWRT 2.4 (Fritz 32XX, 71XX, 72XX ...)
• ppc-dbox2 = PPC-Old (Dbox2, Dream500 ...)
• ppc-dream = PPC Tuxbox (Dream 600, 7000 ...)
• ppc-dream-old = PPC Tuxbox (ältere Dreams mit Gemini, mit libcrypto.so.0.9.7)
• raspb = RaspBerry (libcrypto static)
• sh4 = Golden Media ...
• sh4-stapi = Kathi ...
• syn-atom = Synologie with Atom CPU (additional with libcrypto static)
• x86-32 = Linux PC's 32 Bit, Igel ...
• x86-64 = Linux PC's 64 Bit

Additional for "arm", "raspb", "syn-atom", "owrt24" and "x86-64" a binary with "libusb" and "pcsc".
Additional for "syn-atom" and "mipsel" a binary with libcrypto static.
Additional for "mipsel" a binary with "libusb".
Some binaries also as compressed versions.
This version creates a virtual card reader, which is configured automatically.
You may save the default reader configuration with the webif and then modify it to your own liking.
SoftCam.Key:
OSCam-EMU does not require, but will make use of "SoftCam.Key" if available.
"SoftCam.Key" is searched in the oscam config folder (where oscam.conf is located) and also in "/var/keys".
.xxx-yyy-zzz...
xxx = internal SVN-Release
yyy = SVN-Release from EMULATOR
zzz = OSCam-SVN-Release from original Thanks to HaPeBa by HDSC-Board Die gibt es hier:Link ist nicht mehr aktiv.
Thanks to HaPeBa by HDSC-Board

 

[geromino]

HDSC-Oscam-EMU-dev148-226-10123

Die gibt es hier:Link ist nicht mehr aktiv. Special Features:
Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File
WebIf - Readers-/Users-Menu --> Disable-/Enable-Symbol change WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)
WebIf - Special WebIf-Design included
WebIf - SaveEmm --> without "*.bin"
Oscam Komplett - Minimal:
- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)
But now with protocol "SCAM" and edit "SoftCam.Key" over webif and with protocol "GBox" for test
Explanation of binaries:
arm = Dockstar (Debian), Sheevaplug ...
raspb = RaspBerry (libcrypto static)
arm-coolstream = Coolstream
fritz = Fritzbox
owrt24 = OpenWRT 2.4 (Fritz 32XX, 71XX, 72XX ...)
mca = Matrix Air Cam (libcrypto static)
mipsel = Mipsel Tuxbox (newer Dreams ...)
mipsel-wdtv = Mipsel Tuxbox WDTV
ppc-dbox2 = PPC-Old (Dbox2, Dream500 ...)
ppc-dream = PPC Tuxbox (Dream 600, 7000 ...)
ppc-dream-old = PPC Tuxbox (ältere Dreams mit Gemini, mit libcrypto.so.0.9.7)
sh4 = Golden Media ...
sh4-stapi = Kathi ...
syn-atom = Synologie with Atom CPU (additional with libcrypto static)
x86-32 = Linux PC's 32 Bit, Igel ...
x86-64 = Linux PC's 64 Bit
Additional for "arm", "raspb", "syn-atom", "owrt24" and "x86-64" a binary with "libusb" and "pcsc".
Additional for "syn-atom" and "mipsel" a binary with libcrypto static.
Additional for "mipsel" a binary with "libusb".
And a additional WebIf-Design (Carbon V3 for HDSC 2.3.zip). Unzip and copy TPL-Files to OSCam-Template-Directory.

MfG
HaPeBa

 

[geromino]

HDSC-Oscam-EMU-dev166-226-10152

Die gibt es hier: Link ist nicht mehr aktiv. Special Features:

Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disable-/Enable-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)
WebIf - Special WebIf-Design included
WebIf - SaveEmm --> without "*.bin"
Oscam Komplett - Minimal:
- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)

But now with protocol "SCAM" and edit "SoftCam.Key" over webif and with protocol "GBox" for test
Explanation of binaries:
arm = Dockstar (Debian), Sheevaplug ...
raspb = RaspBerry (libcrypto static)
arm-coolstream = Coolstream
fritz71xx = Fritzbox 71xx
fritz73xx = Fritzbox 73xx
owrt24 = OpenWRT 2.4 (Fritz 32XX, 71XX, 72XX ...)
mca = Matrix Air Cam (libcrypto static)
mipsel = Mipsel Tuxbox (newer Dreams ...)
mipsel-wdtv = Mipsel Tuxbox WDTV
ppc-dbox2 = PPC-Old (Dbox2, Dream500 ...)
ppc-dream = PPC Tuxbox (Dream 600, 7000 ...)
ppc-dream-old = PPC Tuxbox (ältere Dreams mit Gemini, mit libcrypto.so.0.9.7)
sh4 = Golden Media ...
sh4-stapi = Kathi ...
syn-atom = Synologie with Atom CPU (additional with libcrypto static)
x86-32 = Linux PC's 32 Bit, Igel ...
x86-64 = Linux PC's 64 Bit
Additional for "arm", "raspb", "syn-atom", "owrt24" and "x86-64" a binary with "libusb" and "pcsc".
Additional for "syn-atom" and "mipsel" a binary with "libcrypto static".
Additional for "mipsel", "fritz71xx" and "fritz73xx" a binary with "libusb".
Additional for "fritz71xx" a binary with "libusb static".
And a additional WebIf-Design (Carbon V3 for HDSC 2.3.zip). Unzip and copy TPL-Files to OSCam-Template-Directory.
MfG
HaPeBa

 

[geromino]

HDSC-Oscam-EMU-dev234-250-10277

Die gibt es hier:Link ist nicht mehr aktiv. Explanation of binaries:

• arm = Dockstar (Debian), Sheevaplug ...
• raspb = RaspBerry (libcrypto static)
• arm-coolstream = Coolstream
• fritz71xx = Fritzbox 71xx
• fritz73xx = Fritzbox 73xx (earlier named only "fritz")
• fritz74xx = Fritzbox 74xx
• owrt24 = OpenWRT 2.4 (Fritz 32XX, 71XX, 72XX ...)
• mca = Matrix Air Cam (libcrypto static)
• mipsel = Mipsel Tuxbox (newer Dreams ...)
• mipsel-wdtv = Mipsel Tuxbox WDTV
• ppc-dbox2 = PPC-Old (Dbox2, Dream500 ...)
• ppc-dream = PPC Tuxbox (Dream 600, 7000 ...)
• ppc-dream-old = PPC Tuxbox (ältere Dreams mit Gemini, mit libcrypto.so.0.9.7)
• sh4 = Golden Media ...
• sh4-stapi = Kathi ...
• syn-atom = Synologie with Atom CPU
• x86-32 = Linux PC's 32 Bit, Igel ...
• x86-64 = Linux PC's 64 Bit

Additional for "arm", "raspb", "syn-atom", "owrt24" and "x86-64" a binary with "libusb" and "pcsc".
Additional for "syn-atom" and "mipsel" a binary with "libcrypto static".
Additional for "mipsel", "fritz71xx", "fritz73xx" and "fritz74xx" a binary with "libusb".
Additional for "fritz71xx" and "x86-32" a binary with "libusb static".

And a additional WebIf-Design (Carbon V3 for HDSC 2.3.zip). Unzip and copy TPL-Files to OSCam-Template-Directory.

This version creates a virtual card reader, which is configured automatically.
You may save the default reader configuration with the webif and then modify it to your own liking.

SoftCam.Key:
OSCam-EMU does not require, but will make use of "SoftCam.Key" if available.
"SoftCam.Key" is searched in the oscam config folder (where oscam.conf is located) and also in "/var/keys".

Please test and ...

devxxx-yyy-zzz...
xxx = internal SVN-Release
yyy = SVN-Release from EMULATOR
zzz = OSCam-SVN-Release from original
Special Features:

• Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File
• WebIf - Readers-/Users-Menu --> Disable-/Enable-Symbol changed
• WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
• (LI.menu_script ... and/or LI.menu_shutdown ...)
• WebIf - Special WebIf-Design included
• WebIf - SaveEmm --> without "*.bin"
• SCAM protocol
• "SoftCam.Key" Edit over webif
• NDS 0x07 Bad-EMM-Filter

Oscam Komplett - Minimal:
- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)
- GBox
Thanks to HaPeBa by HDSC-Board