Digital Eliteboard - Das Digitale Technik Forum

Registriere dich noch heute kostenloses um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereiche, welche für Gäste verwehrt bleiben

Hardware -Reparatur- Display

Holzwurm0101

Best Member
Boardveteran
Registriert
25. November 2007
Beiträge
7.020
Reaktionspunkte
2.994
Punkte
383
Ort
im Norden
Einer unserer Entwickler hatte ein seltsames Problem mit dem TM9100 und beschrieb das Problem wie folgt.
I'm having a problem at power on and I see four dashes on the front panel display.​
Ich habe ein Problem beim Einschalten auf, und ich sehe vier Striche im Display an der Vorderseite.
Not a good thing imho.​
Nicht eine gute Sache imho.
If I press any button the red light comes on.​
Wenn ich eine Taste drücken die rote Lampe auf.
Then when I press the buttons again the red light flashes on and off.​
Dann, wenn ich drücken Sie die Tasten wieder das rote Licht blinkt ein-und ausschalten.
Another thing I did notice is when I pressed the left button (keep on pressing it) when powering on the blue light came on.​
Ein weiterer Hinweis, was ich habe ist, wenn ich die linke Maustaste gedrückt (halten Sie sie), wenn die Stromversorgung über das blaue Licht kam.
The problem turned out to be a faulty capacitor on a circuit board behind the front panel….​
Das Problem erwies sich als eine fehlerhafte Kondensator auf einer Platine hinter der Frontplatte ....
Frontpanel.png
frontpanclose.png

I checked the capacitors on the motherboard and they all appeared fine (in relation to each other) so I removed the front lid ( removed the ribbon cable first of course).​
Ich habe die Kondensatoren auf dem Motherboard, und sie alle erschienen Geldbuße (in Bezug auf jedes andere), so daß ich die vordere Abdeckung entfernt (entfernt das Flachbandkabel ersten Kurs).
Then unscrewed the bit of electronics that has the lcd display on it.​
Dann schraubten den Bit-Elektronik, die das LCD-Display auf.
There are 3 identical capacitors in there all 16 volts 47 uf.​
Es gibt 3 identisch Kondensatoren es in allen 16 Volt 47 uf.
The capacitor c2 ( its located by the infrared sensor and the led display) Originally I used 50v 47 uf just for a quick test and it worked (I have a 16v 47uf in it now).​
Der Kondensator C2 (seine Lage durch die Infrarot-Sensor und die LED-Anzeige) Ursprünglich habe ich 50v 47 uf nur für einen kurzen Test und es hat funktioniert (ich habe eine 16v 47uf in der es jetzt).
Now just for a quick note when the box is unplugged and the tv is on the scart socket charges this capacitor up so make sure you replace it with the same values.​
Jetzt brauchen Sie nur noch für eine kurze Notiz, wenn die Box vom Netz getrennt wird und der TV ist über die SCART-Buchse Gebühren dieser Kondensator so stellen Sie sicher, dass Sie ersetzen sie durch die gleichen Werte.

Übersetzung durch Google
 
Zurück
Oben