1. Diese Seite verwendet Cookies. Wenn du dich weiterhin auf dieser Seite aufhältst, akzeptierst du unseren Einsatz von Cookies. Weitere Informationen

Gelöst freetz / Smargo / yavdr 0.3

Dieses Thema im Forum "CS VDR-SC" wurde erstellt von Borgal, 27. November 2013.

  1. Borgal
    Offline

    Borgal Newbie

    Registriert:
    23. Oktober 2011
    Beiträge:
    13
    Zustimmungen:
    0
    Punkte für Erfolge:
    1
    Hallo Leute,

    ich bin kurz vorm Verzweifeln.

    Ich habe auf meiner FB 7240 ein freetz Image drauf gezogen und versuche jetzt darauf ein Oscam mit einer V14 im Smargo Kartenleser zu betreiben.
    Als Client sollen dann 3 YaVDR 0.3 im Heimnetz zum Einsatz kommen.

    das Log des Oscam sieht wie folgt aus:

    ------------->> OSCam << cardserver started at Wed Nov 27 21:27:12 2013 ---------------------------------------------
    2013/11/27 21:27:12 0 s >> OSCam << cardserver started, version ZD-1.20_svn, build r9042 (mipsel-linux-uclibc-libusb)
    2013/11/27 21:27:12 0 s creating pidfile /var/run/oscam.pid with pid 12156
    2013/11/27 21:27:12 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
    2013/11/27 21:27:12 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
    2013/11/27 21:27:12 0 s signal handling initialized
    2013/11/27 21:27:12 0 s 200 service-id's loaded in 13ms
    2013/11/27 21:27:12 0 s 200 tier-id's loaded
    2013/11/27 21:27:12 0 s 13 provid's loaded
    2013/11/27 21:27:12 0 s 22 lengths for caid guessing loaded
    2013/11/27 21:27:12 0 s cccam: initialized (fd=7, port=56073, ip=192.168.0.56)
    2013/11/27 21:27:12 0 s skyV14 [smartreader] creating thread for device 001:004
    2013/11/27 21:27:12 0 s loadbalancer: can't read from file /tmp/.oscam/stat
    2013/11/27 21:27:12 0 s waiting for local card init
    2013/11/27 21:27:12 4FD790 r skyV14 [smartreader] De SR_init
    2013/11/27 21:27:12 4FD790 r skyV14 [smartreader] initing smargo type SR
    2013/11/27 21:27:12 4FD790 r skyV14 [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
    2013/11/27 21:27:12 50C8B8 h webif: decompressed 54397 bytes back into 154940 bytes
    2013/11/27 21:27:12 50C8B8 h HTTP Server running. ip=192.168.0.56 port=83
    2013/11/27 21:27:12 4FD790 r Found smartreader device 001:004
    2013/11/27 21:27:12 4FD790 r skyV14 [smartreader] reader type is 1
    2013/11/27 21:27:12 4FD790 r skyV14 [smartreader] Pthread Wordt gecreeerd
    2013/11/27 21:27:12 4FD790 r skyV14 [smartreader] clocking for smartreader with smartreader protocol
    2013/11/27 21:27:12 4FD790 r skyV14 [smartreader] Reader initialized (device=001:004, detect=cd, mhz=369, cardmhz=369)
    2013/11/27 21:27:13 4FD790 r skyV14 [smartreader] card detected
    2013/11/27 21:27:17 4FD790 r skyV14 [smartreader] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
    2013/11/27 21:27:17 4FD790 r skyV14 [smartreader] Init card protocol T0, FI=1, F=372, D=4, N=2
    2013/11/27 21:27:17 4FD790 r skyV14 [smartreader] Calculated work ETU is 25.20 us
    2013/11/27 21:27:17 4FD790 r skyV14 [smartreader] Effectif reader settings mhz =369 F= 372 D= 4 N=2 T=0 inv=1 parity=ODD
    2013/11/27 21:27:17 4FD790 r skyV14 [smartreader] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed of 3.69 MHz (specified in reader->mhz)
    2013/11/27 21:27:19 4FD790 r skyV14 [smartreader] Card type: P1TV
    2013/11/27 21:27:19 4FD790 r skyV14 [smartreader] Rom version: 20AA
    2013/11/27 21:27:19 4FD790 r skyV14 [smartreader] parental lock setting: FF FF FF FF
    2013/11/27 21:27:19 4FD790 r skyV14 [smartreader] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
    2013/11/27 21:27:19 4FD790 r skyV14 [smartreader] serial: ########, BoxID: ########, baseyear: 2004
    2013/11/27 21:27:19 4FD790 r skyV14 [smartreader] ready for requests
    2013/11/27 21:27:19 4FD790 r skyV14 [smartreader] found card system videoguard2
    2013/11/27 21:27:19 4FD790 r skyV14 [videoguard2] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
    2013/11/27 21:27:19 4FD790 r skyV14 [videoguard2] card detected
    2013/11/27 21:27:19 4FD790 r skyV14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
    2013/11/27 21:27:19 4FD790 r skyV14 [videoguard2] tier: 0046, expiry date: 2014/02/23-00:00:00
    2013/11/27 21:27:19 4FD790 r skyV14 [videoguard2] tier: 005a, expiry date: 2014/02/23-00:00:00
    2013/11/27 21:27:19 4FD790 r skyV14 [videoguard2] tier: 0065, expiry date: 2014/02/23-00:00:00 Universal HD Germany
    2013/11/27 21:27:19 4FD790 r skyV14 [videoguard2] tier: 0066, expiry date: 2014/02/23-00:00:00 Sky HD FanZone
    2013/11/27 21:27:19 4FD790 r skyV14 [videoguard2] tier: 0067, expiry date: 2014/02/23-00:00:00
    2013/11/27 21:27:19 4FD790 r skyV14 [videoguard2] tier: 0068, expiry date: 2014/02/23-00:00:00
    2013/11/27 21:27:19 4FD790 r skyV14 [videoguard2] tier: 0069, expiry date: 2014/02/23-00:00:00 Sky Bundesliga HD 1
    2013/11/27 21:27:19 4FD790 r skyV14 [videoguard2] tier: 006a, expiry date: 2014/02/23-00:00:00 Sky Action HD Germany
    2013/11/27 21:27:19 4FD790 r skyV14 [videoguard2] tier: 006b, expiry date: 2014/02/23-00:00:00 Sky Hits HD Germany
    2013/11/27 21:27:19 4FD790 r skyV14 [videoguard2] tier: 006f, expiry date: 2014/02/23-00:00:00 Disney Cinemagic HD Germany
    2013/11/27 21:27:19 4FD790 r skyV14 [videoguard2] tier: 007b, expiry date: 2014/02/23-00:00:00 TNT Serie HD
    2013/11/27 21:27:20 4FD790 r skyV14 [videoguard2] tier: 007d, expiry date: 2014/02/23-00:00:00 AXN HD Germany
    2013/11/27 21:27:20 4FD790 r skyV14 [videoguard2] tier: 0081, expiry date: 2014/02/23-00:00:00 Sky Sport HD Germany
    2013/11/27 21:27:20 4FD790 r skyV14 [videoguard2] tier: 008e, expiry date: 2014/02/23-00:00:00
    2013/11/27 21:27:20 4FD790 r skyV14 [videoguard2] tier: 00c0, expiry date: 2014/02/23-00:00:00
    2013/11/27 21:27:20 4FD790 r skyV14 [videoguard2] tier: 00c7, expiry date: 2014/02/23-00:00:00
    2013/11/27 21:27:20 4FD790 r skyV14 [videoguard2] tier: 00c8, expiry date: 2014/02/23-00:00:00
    2013/11/27 21:27:20 4FD790 r skyV14 [videoguard2] tier: 00c9, expiry date: 2014/02/23-00:00:00
    2013/11/27 21:27:20 4FD790 r skyV14 [videoguard2] tier: 00ca, expiry date: 2014/02/23-00:00:00
    2013/11/27 21:27:20 4FD790 r skyV14 [videoguard2] tier: 00cb, expiry date: 2014/02/23-00:00:00
    2013/11/27 21:27:20 4FD790 r skyV14 [videoguard2] tier: 00f3, expiry date: 2014/02/23-00:00:00
    2013/11/27 21:27:20 4FD790 r skyV14 [videoguard2] tier: 00fa, expiry date: 2014/02/23-00:00:00
    2013/11/27 21:27:20 4FD790 r skyV14 [videoguard2] tier: 00ff, expiry date: 2014/02/23-00:00:00
    2013/11/27 21:27:27 0 s init for all local cards done
    2013/11/27 21:27:27 0 s anti cascading disabled
    2013/11/27 21:28:34 53A8C0 c encrypted cccam-client 192.168.0.20 granted (vdrsz, au=auto (1 reader))

    meine ocsam.conf:

    [global]
    serverip = 192.168.0.56
    logfile = /var/log/oscam.log
    maxlogsize = 4096


    [cccam]
    port = 56073


    [webif]
    httpport = 83
    httphelplang = de
    httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
    aulow = 120

    oscam.user:

    [account]
    user = vdrwz
    pwd = password
    group = 1
    au = 1


    [account]
    user = vdrsz
    pwd = password
    group = 1
    au = 1

    oscam.server:

    [reader]
    label = skyV14
    protocol = smartreader
    device = 001:004
    caid = 098C
    boxid = 12345678
    ecmwhitelist = 098C:91,59
    detect = cd
    mhz = 369
    cardmhz = 369
    group = 1
    emmcache = 1,3,2

    Möglicherweise läuft der Oscam Server ja schon und ich hab das Problem auf der Clientseite.

    Hier habe ich das vdr-plugin-sc und vdr-plugin-sc-cardclient installiert.
    In der order.conf sc nach ganz oben gesetzt und eine datei cardclient.conf angelegt.

    cardclient.conf:

    cccam2:192.168.0.56:56073:0/0000/0000:vdrsz:password


    Leider kann ich auf dem VDR kein Logfile für das sc-plugin finden, daher beschränkt sich hier die Fehlersuche auf Bild hell oder nicht hell :-(

    Habt ihr eine Idee, bzw. einen Tipp wie ich mich am besten herantasten könnte?

    Vielen Dank und Gruß
    Borgal
     
    #1
  2. phantom

    Nervigen User Advertisement

  3. legenwaitforitdary
    Offline

    legenwaitforitdary Meister

    Registriert:
    12. November 2011
    Beiträge:
    748
    Zustimmungen:
    147
    Punkte für Erfolge:
    43
    AW: freetz / Smargo / yavdr 0.3

    Server sieht gut aus.
    Ändere zu allererst einmal deine cardclient.conf in:
    cccam2:192.168.0.56:56073:1/098C/FFFF:vdrsz:password
    Ums Logfile des vdrs wirst du wohl aber nicht herumkommen, sollte es nicht so schon klappen.
    Du kannst in den Plugineinstellungen des sc Plugin einstellen wohin geloggt werden soll.
    Möglicherweise wird es momentan sogar ins syslog geschrieben, schau zuerst da mal nach.
     
    #2
  4. Borgal
    Offline

    Borgal Newbie

    Registriert:
    23. Oktober 2011
    Beiträge:
    13
    Zustimmungen:
    0
    Punkte für Erfolge:
    1
    AW: freetz / Smargo / yavdr 0.3

    cardclient.conf hab ich geändert, leider ohne erfolg.

    er soll nach /var/log/vdr-sc loggen, aber da ist leider nichts zu finden.
    Syslog ist aus.

    hmmm :)
     
    #3
  5. legenwaitforitdary
    Offline

    legenwaitforitdary Meister

    Registriert:
    12. November 2011
    Beiträge:
    748
    Zustimmungen:
    147
    Punkte für Erfolge:
    43
    AW: freetz / Smargo / yavdr 0.3

    Wenn er nach /var/log/vdr-sc loggen sollte, wird er wohl keine rechte dazu haben, wenn da nix ist.
    =>
    sudo touch /var/log/vdr-sc
    sudo chown vdr.vdr /var/log/vdr-sc
    sudo restart vdr
    -> nochmal nachschauen
     
    #4
  6. Borgal
    Offline

    Borgal Newbie

    Registriert:
    23. Oktober 2011
    Beiträge:
    13
    Zustimmungen:
    0
    Punkte für Erfolge:
    1
    AW: freetz / Smargo / yavdr 0.3

    anscheint waren die Rechte wirklich nicht ok, jetzt hab ich folgendes im LOG:

    Nov 27 23:05:07.797 [general.debug] logfile '/var/log/vdr-sc' opened
    Nov 27 23:05:07.796 [general.info] SC version 1.0.0pre-AR-29b7b5f231c8 initializing (VDR 1.7.27)
    Nov 27 23:05:07.833 [general.info] SC version 1.0.0pre-AR-29b7b5f231c8 starting (VDR 1.7.27)
    Nov 27 23:05:07.833 [core.load] ** Plugin config:
    Nov 27 23:05:07.833 [core.load] ** Key updates (AU) are enabled (active CAIDs) (prestart)
    Nov 27 23:05:07.833 [core.load] ** Local systems DON'T take priority over cached remote
    Nov 27 23:05:07.833 [core.load] ** Concurrent FF recordings are NOT allowed
    Nov 27 23:05:07.834 [core.load] ** Force transfermode with digital audio
    Nov 27 23:05:07.834 [core.load] ** ECM cache is set to enabled
    Nov 27 23:05:07.834 [core.load] ** TsBufferSize is 4 MB
    Nov 27 23:05:07.834 [core.load] ** ScCaps are 0 0 0 0 0 0 0 0 0 0
    Nov 27 23:05:07.834 [general.info] loading cardclient config from /var/lib/vdr/plugins/sc/cardclient.conf
    Nov 27 23:05:07.834 [cardclient.cccam2extra] cmd 0c crypt mode now 0
    Nov 27 23:05:07.834 [cardclient.cccam2] logout from server initiated
    Nov 27 23:05:07.834 [cardclient.cccam2extra] reader thread stopped
    Nov 27 23:05:07.834 [cardclient.cccam2extra] network shut down
    Nov 27 23:05:07.835 [cardclient.cccam2extra] cmd 0c crypt mode now 0
    Nov 27 23:05:07.835 [cardclient.cccam2extra] logout done
    Nov 27 23:05:07.835 [cardclient.core] hostname=192.168.0.56 port=56073 emm=1 emmCaids 098c/ffff
    Nov 27 23:05:07.835 [cardclient.core] cccam2: username=vdrsz password=password
    Nov 27 23:05:07.835 [cardclient.core] our nodeid: 76 05 dd 32 4e 9c 3e 07
    Nov 27 23:05:07.835 [cardclient.core] pretended CCcam version '2.0.11' build '2892'
    Nov 27 23:05:07.835 [cardclient.core] client 'cccam2' ready
    Nov 27 23:05:07.835 [cardclient.cccam2] logout from server initiated
    Nov 27 23:05:07.835 [cardclient.cccam2extra] reader thread stopped
    Nov 27 23:05:07.835 [cardclient.cccam2extra] network shut down
    Nov 27 23:05:07.835 [cardclient.cccam2extra] cmd 0c crypt mode now 0
    Nov 27 23:05:07.835 [cardclient.cccam2extra] logout done
    Nov 27 23:05:07.837 [core.net] connecting to 192.168.0.56:56073/tcp (192.168.0.56)
    Nov 27 23:05:07.849 [cardclient.cccam2extra] welcome checksum correct
    Nov 27 23:05:07.861 [cardclient.login] CCcam login succeed
    Nov 27 23:05:07.862 [general.info] loading ecm cache from /var/lib/vdr/plugins/sc/ecm.cache
    Nov 27 23:05:07.863 [cardclient.login] cccam2: server version 2.1.1 build 2971 nodeid 10 ef 98 25 10 f8 14 f8
    Nov 27 23:05:07.863 [cardclient.cccam2extra] cmd 0B aes key 10 ef 98 25 10 f8 14 f8 32 2e 31 2e 31 00 00 00
    Nov 27 23:05:07.864 [general.error] failed open /var/lib/vdr/plugins/sc/override.conf: Datei oder Verzeichnis nicht gefunden
    Nov 27 23:05:07.865 [core.load] ** registered systems:
    Nov 27 23:05:07.865 [core.load] ** Cardclient (pri -15)
    Nov 27 23:05:09.015 [cardclient.cccam2shares] ADD share 00000064 hops 0 maxdown 10 caid 098c ua 0000000000642057 prov 000000/00642000 (EMM)
    Nov 27 23:05:09.015 [cardclient.cccam2] enabled EMM processing
     
    #5
  7. legenwaitforitdary
    Offline

    legenwaitforitdary Meister

    Registriert:
    12. November 2011
    Beiträge:
    748
    Zustimmungen:
    147
    Punkte für Erfolge:
    43
    AW: freetz / Smargo / yavdr 0.3

    Hmm, hast du mal versucht das dynamite Plugin in der order.conf zu deaktivieren?
     
    #6
  8. Borgal
    Offline

    Borgal Newbie

    Registriert:
    23. Oktober 2011
    Beiträge:
    13
    Zustimmungen:
    0
    Punkte für Erfolge:
    1
    AW: freetz / Smargo / yavdr 0.3

    hmm, nein.
    Bisher sieht meine order.conf so aus:

    ## If you like a fixed plugin order in your menu place the plugin base names
    # here. Remember that the first entry a plugin may get, starts at five in
    # VDR's OSD.
    #
    # If you want a certain Plugin not to be loaded automatically at
    # vdr-startup, then you can simply write "-pluginname" in this file.
    #
    # If you want to add commandline-options for a certain plugin, this file is
    # not the right place - you can add them in the file(s)
    # /etc/vdr/plugins/plugin.<pluginname>.conf - each option in one line
    sc
    firstplugin
    secondplugin
    -thirdplugin
    -fourthplugin
    -xine
    -dummydevice
    -control
    -graphtft
     
    #7
  9. legenwaitforitdary
    Offline

    legenwaitforitdary Meister

    Registriert:
    12. November 2011
    Beiträge:
    748
    Zustimmungen:
    147
    Punkte für Erfolge:
    43
    AW: freetz / Smargo / yavdr 0.3

    Dann füg doch mal in ne neue Zeiel -dynamite hinzu.
     
    #8
  10. Borgal
    Offline

    Borgal Newbie

    Registriert:
    23. Oktober 2011
    Beiträge:
    13
    Zustimmungen:
    0
    Punkte für Erfolge:
    1
    AW: freetz / Smargo / yavdr 0.3

    Das ist übrigens ein Client ohne TV Karte, die sitzt im Server, kann es daran liegen?

    das dynamite brachte leider auch kein Erfolg :)
     
    Zuletzt bearbeitet: 27. November 2013
    #9
  11. legenwaitforitdary
    Offline

    legenwaitforitdary Meister

    Registriert:
    12. November 2011
    Beiträge:
    748
    Zustimmungen:
    147
    Punkte für Erfolge:
    43
    AW: freetz / Smargo / yavdr 0.3

    :emoticon-0103-cool:
    Das hättest du ruhig eher sagen können......
    Der Server ist der einzige der auch Dekodieren kann, du kannst also auf deinem Client das sc Plugin wieder deinstallieren.
    Ich hab mich schon gewundert warum im Log nichts stand a la "Using software decryption on Card x/y", naja.
     
    #10
  12. Borgal
    Offline

    Borgal Newbie

    Registriert:
    23. Oktober 2011
    Beiträge:
    13
    Zustimmungen:
    0
    Punkte für Erfolge:
    1
    AW: freetz / Smargo / yavdr 0.3

    oh man sorry, also muss das "nur" auf dem Server laufen und alle Clients können dann ohne zutun darüber schauen?

    Gruß
    Borgal
     
    #11
  13. Borgal
    Offline

    Borgal Newbie

    Registriert:
    23. Oktober 2011
    Beiträge:
    13
    Zustimmungen:
    0
    Punkte für Erfolge:
    1
    AW: freetz / Smargo / yavdr 0.3

    Ok, ich hab jetzt alles auf dem Server installiert.

    Folgendes Log schreibt das sc-plugin:

    Nov 27 23:58:16.712 [general.debug] logfile '/var/log/vdr-sc' openedNov 27 23:58:16.712 [general.debug] capturing device 0/0 (subsystem ID 13c2101c)
    Nov 27 23:58:16.713 [general.debug] creating standard device 0/0
    Nov 27 23:58:16.733 [general.debug] capturing device 1/0 (subsystem ID d4709022)
    Nov 27 23:58:16.733 [general.debug] creating standard device 1/0
    Nov 27 23:58:16.756 [general.info] SC version 1.0.0pre-AR-29b7b5f231c8 initializing (VDR 1.7.27)
    Nov 27 23:58:16.756 [general.info] SC version 1.0.0pre-AR-29b7b5f231c8 starting (VDR 1.7.27)
    Nov 27 23:58:16.756 [core.load] ** Plugin config:
    Nov 27 23:58:16.756 [core.load] ** Key updates (AU) are enabled (active CAIDs) (prestart)
    Nov 27 23:58:16.756 [core.load] ** Local systems DON'T take priority over cached remote
    Nov 27 23:58:16.756 [core.load] ** Concurrent FF recordings are NOT allowed
    Nov 27 23:58:16.756 [core.load] ** Force transfermode with digital audio
    Nov 27 23:58:16.756 [core.load] ** ECM cache is set to enabled
    Nov 27 23:58:16.756 [core.load] ** TsBufferSize is 4 MB
    Nov 27 23:58:16.756 [core.load] ** ScCaps are 0 0 0 0 0 0 0 0 0 0
    Nov 27 23:58:16.756 [general.info] loading cardclient config from /var/lib/vdr/plugins/sc/cardclient.conf
    Nov 27 23:58:16.757 [cardclient.cccam2extra] cmd 0c crypt mode now 0
    Nov 27 23:58:16.757 [cardclient.cccam2] logout from server initiated
    Nov 27 23:58:16.757 [cardclient.cccam2extra] reader thread stopped
    Nov 27 23:58:16.757 [cardclient.cccam2extra] network shut down
    Nov 27 23:58:16.757 [cardclient.cccam2extra] cmd 0c crypt mode now 0
    Nov 27 23:58:16.757 [cardclient.cccam2extra] logout done
    Nov 27 23:58:16.757 [cardclient.core] hostname=192.168.0.56 port=56073 emm=0 emmCaids 0000/0000
    Nov 27 23:58:16.757 [cardclient.core] cccam2: username=nas password=password
    Nov 27 23:58:16.757 [cardclient.core] our nodeid: 0a ad 2a d3 60 9f 3c 00
    Nov 27 23:58:16.757 [cardclient.core] pretended CCcam version '2.0.11' build '2892'
    Nov 27 23:58:16.757 [cardclient.core] client 'cccam2' ready
    Nov 27 23:58:16.757 [cardclient.cccam2] logout from server initiated
    Nov 27 23:58:16.757 [cardclient.cccam2extra] reader thread stopped
    Nov 27 23:58:16.757 [cardclient.cccam2extra] network shut down
    Nov 27 23:58:16.757 [cardclient.cccam2extra] cmd 0c crypt mode now 0
    Nov 27 23:58:16.757 [cardclient.cccam2extra] logout done
    Nov 27 23:58:16.757 [core.net] connecting to 192.168.0.56:56073/tcp (192.168.0.56)
    Nov 27 23:58:16.759 [cardclient.cccam2extra] welcome checksum correct
    Nov 27 23:58:16.761 [cardclient.login] CCcam login succeed
    Nov 27 23:58:16.762 [general.error] failed open /var/lib/vdr/plugins/sc/override.conf: Datei oder Verzeichnis nicht gefunden
    Nov 27 23:58:16.762 [core.load] ** registered systems:
    Nov 27 23:58:16.762 [core.load] ** Cardclient (pri -15)
    Nov 27 23:58:16.762 [general.info] Using software decryption on card 1/0
    Nov 27 23:58:16.762 [core.ci] 1/0: no active CAIDs
    Nov 27 23:58:16.762 [core.ci] card 1/0, slot 0 (v= 1) caids:
    Nov 27 23:58:16.762 [core.ci] 1/0: reset of slot 0 requested
    Nov 27 23:58:16.762 [general.info] Using software decryption on card 0/0
    Nov 27 23:58:16.762 [core.ci] 0/0: no active CAIDs
    Nov 27 23:58:16.762 [core.ci] card 0/0, slot 0 (v= 1) caids:
    Nov 27 23:58:16.762 [core.ci] 0/0: reset of slot 0 requested
    Nov 27 23:58:16.763 [cardclient.login] cccam2: server version 2.1.1 build 2971 nodeid 10 ef 98 25 10 f8 14 f8
    Nov 27 23:58:16.763 [cardclient.cccam2extra] cmd 0B aes key 10 ef 98 25 10 f8 14 f8 32 2e 31 2e 31 00 00 00
    Nov 27 23:58:18.001 [cardclient.cccam2shares] ADD share 00000064 hops 0 maxdown 10 caid 098c ua 0000000000642057 prov 000000/00642000 (EMM)
     
    #12
  14. legenwaitforitdary
    Offline

    legenwaitforitdary Meister

    Registriert:
    12. November 2011
    Beiträge:
    748
    Zustimmungen:
    147
    Punkte für Erfolge:
    43
    AW: freetz / Smargo / yavdr 0.3

    Kein Ding.
    Und ja, muss auf dem Server laufen, eben da wo die DVB Karten sind.
     
    #13
  15. Borgal
    Offline

    Borgal Newbie

    Registriert:
    23. Oktober 2011
    Beiträge:
    13
    Zustimmungen:
    0
    Punkte für Erfolge:
    1
    AW: freetz / Smargo / yavdr 0.3

    Leider wird das Bild immer noch nicht hell.

    Im sc log steht nach Umschalten folgendes:

    Nov 28 00:29:32.611 [general.debug] logfile '/var/log/vdr-sc' openedNov 28 00:29:32.611 [general.debug] capturing device 0/0 (subsystem ID 13c2101c)
    Nov 28 00:29:32.815 [general.debug] creating standard device 0/0
    Nov 28 00:29:32.833 [general.debug] capturing device 1/0 (subsystem ID d4709022)
    Nov 28 00:29:32.833 [general.debug] creating standard device 1/0
    Nov 28 00:29:32.886 [general.info] SC version 1.0.0pre-AR-29b7b5f231c8 initializing (VDR 1.7.27)
    Nov 28 00:29:33.043 [general.info] SC version 1.0.0pre-AR-29b7b5f231c8 starting (VDR 1.7.27)
    Nov 28 00:29:33.065 [core.load] ** Plugin config:
    Nov 28 00:29:33.065 [core.load] ** Key updates (AU) are enabled (active CAIDs) (prestart)
    Nov 28 00:29:33.065 [core.load] ** Local systems DON'T take priority over cached remote
    Nov 28 00:29:33.065 [core.load] ** Concurrent FF recordings are NOT allowed
    Nov 28 00:29:33.065 [core.load] ** Force transfermode with digital audio
    Nov 28 00:29:33.065 [core.load] ** ECM cache is set to enabled
    Nov 28 00:29:33.065 [core.load] ** TsBufferSize is 4 MB
    Nov 28 00:29:33.065 [core.load] ** ScCaps are 0 0 0 0 0 0 0 0 0 0
    Nov 28 00:29:33.142 [general.info] loading cardclient config from /var/lib/vdr/plugins/sc/cardclient.conf
    Nov 28 00:29:33.166 [cardclient.cccam2extra] cmd 0c crypt mode now 0
    Nov 28 00:29:33.166 [cardclient.cccam2] logout from server initiated
    Nov 28 00:29:33.166 [cardclient.cccam2extra] reader thread stopped
    Nov 28 00:29:33.166 [cardclient.cccam2extra] network shut down
    Nov 28 00:29:33.166 [cardclient.cccam2extra] cmd 0c crypt mode now 0
    Nov 28 00:29:33.166 [cardclient.cccam2extra] logout done
    Nov 28 00:29:33.166 [cardclient.core] hostname=192.168.0.56 port=56073 emm=1 emmCaids 098c/ffff
    Nov 28 00:29:33.166 [cardclient.core] cccam2: username=nas password=password
    Nov 28 00:29:33.166 [cardclient.core] our nodeid: 58 52 04 26 12 87 4c d8
    Nov 28 00:29:33.166 [cardclient.core] pretended CCcam version '2.0.11' build '2892'
    Nov 28 00:29:33.166 [cardclient.core] client 'cccam2' ready
    Nov 28 00:29:33.166 [cardclient.cccam2] logout from server initiated
    Nov 28 00:29:33.166 [cardclient.cccam2extra] reader thread stopped
    Nov 28 00:29:33.166 [cardclient.cccam2extra] network shut down
    Nov 28 00:29:33.166 [cardclient.cccam2extra] cmd 0c crypt mode now 0
    Nov 28 00:29:33.166 [cardclient.cccam2extra] logout done
    Nov 28 00:29:33.167 [core.net] connecting to 192.168.0.56:56073/tcp (192.168.0.56)
    Nov 28 00:29:33.185 [cardclient.cccam2extra] welcome checksum correct
    Nov 28 00:29:33.197 [cardclient.login] CCcam login succeed
    Nov 28 00:29:33.197 [general.error] failed open /var/lib/vdr/plugins/sc/override.conf: Datei oder Verzeichnis nicht gefunden
    Nov 28 00:29:33.197 [core.load] ** registered systems:
    Nov 28 00:29:33.197 [core.load] ** Cardclient (pri -15)
    Nov 28 00:29:33.197 [general.info] Using software decryption on card 1/0
    Nov 28 00:29:33.197 [core.ci] 1/0: no active CAIDs
    Nov 28 00:29:33.197 [core.ci] card 1/0, slot 0 (v= 1) caids:
    Nov 28 00:29:33.197 [core.ci] 1/0: reset of slot 0 requested
    Nov 28 00:29:33.197 [general.info] Using software decryption on card 0/0
    Nov 28 00:29:33.198 [core.ci] 0/0: no active CAIDs
    Nov 28 00:29:33.198 [core.ci] card 0/0, slot 0 (v= 1) caids:
    Nov 28 00:29:33.198 [core.ci] 0/0: reset of slot 0 requested
    Nov 28 00:29:33.224 [cardclient.login] cccam2: server version 2.1.1 build 2971 nodeid 10 ef 98 25 10 f8 14 f8
    Nov 28 00:29:33.224 [cardclient.cccam2extra] cmd 0B aes key 10 ef 98 25 10 f8 14 f8 32 2e 31 2e 31 00 00 00
    Nov 28 00:29:35.011 [cardclient.cccam2shares] ADD share 00000064 hops 0 maxdown 10 caid 098c ua 0000000000642057 prov 000000/00642000 (EMM)
    Nov 28 00:29:35.011 [cardclient.cccam2] enabled EMM processing
    Nov 28 00:29:35.055 [core.pids] 1/0: now tuned to source 5300ff40(S19.2E) transponder 1b4dd
    Nov 28 00:30:24.016 [core.pids] 0/0: now tuned to source 5300ff40(S19.2E) transponder 1b63c
    Nov 28 00:30:30.021 [core.pids] 0/0: now tuned to source 5300ff40(S19.2E) transponder 1b148
    Nov 28 00:30:30.021 [core.pids] 1/0: now tuned to source 5300ff40(S19.2E) transponder 1b2e4
    Nov 28 00:30:33.457 [core.pids] 0/0: now tuned to source 5300ff40(S19.2E) transponder 1b63c
    Nov 28 00:30:33.484 [core.au] 0/0: chain caid 1702 -> none available
    Nov 28 00:30:33.484 [core.au] 0/0: chain caid 1837 -> none available
    Nov 28 00:30:33.484 [core.au] 0/0: chain caid 1833 -> none available
    Nov 28 00:30:33.484 [core.au] 0/0: chain caid 09c4 -> none available
    Nov 28 00:30:33.484 [core.au] 0/0: chain caid 098c -> Cardclient(-15) [1008-82/ff]
    Nov 28 00:30:40.075 [core.pids] 0/0: now tuned to source 5300ff40(S19.2E) transponder 1b7a1
    Nov 28 00:30:51.987 [core.pids] 0/0: now tuned to source 5300ff40(S19.2E) transponder 1b48e
    Nov 28 00:30:51.987 [core.pids] 1/0: now tuned to source 5300ff40(S19.2E) transponder 1b4dd
    Nov 28 00:30:52.056 [core.au] 0/0: chain caid 1702 -> none available
    Nov 28 00:30:52.056 [core.au] 0/0: chain caid 1833 -> none available
    Nov 28 00:30:52.056 [core.au] 0/0: chain caid 09c4 -> none available
    Nov 28 00:30:52.056 [core.au] 0/0: chain caid 098c -> Cardclient(-15) [1008-82/ff]
    Nov 28 00:30:54.565 [core.pids] 0/0: now tuned to source 5300ff40(S19.2E) transponder 1b7a1
     
    #14
  16. legenwaitforitdary
    Offline

    legenwaitforitdary Meister

    Registriert:
    12. November 2011
    Beiträge:
    748
    Zustimmungen:
    147
    Punkte für Erfolge:
    43
    AW: freetz / Smargo / yavdr 0.3

    Passiert da in Oscam etwas ?
     
    #15

Diese Seite empfehlen