1. Diese Seite verwendet Cookies. Wenn du dich weiterhin auf dieser Seite aufhältst, akzeptierst du unseren Einsatz von Cookies. Weitere Informationen

Talk Freetz OSCAM mit 0B00(Telecolumbus), 1722/1835 (UMi12) & 1838(UM02) Problem

Dieses Thema im Forum "Fritzbox Talk" wurde erstellt von loleke, 6. Juli 2012.

  1. loleke
    Offline

    loleke Freak

    Registriert:
    1. Februar 2009
    Beiträge:
    213
    Zustimmungen:
    7
    Punkte für Erfolge:
    18
    Moin Moin!

    Komme nicht weiter!

    Habe eine Fritz7170 mit OSCAM 1.20 -Digital Eliteboard- build 6586.
    Dazu einen 7-USB Hub und 2xSmargos und 1x EASYMOUSE2

    An Smargo 1 = 0b00 TC Conax Karte nur Basic1
    An Smargo 2 = 1722/1835 i12 UM Karte nur SKY
    An Easymouse2 = 1838 UM02 Karte nur UM Basic FreeTV

    Meine Configs!!!

    OSCAM CONFIG
    [global]
    nice = -10
    logfile = /var/media/ftp/uStor01/logs/OScam.log
    loghistorysize = 100
    maxlogsize = 0
    disablelog = 0
    cwlogdir =
    emmlogdir =
    usrfile = 0
    disableuserfile = 0
    usrfileflag = 0
    saveinithistory = 0
    disablemail = 1
    mailfile =
    enableled = 0
    serialreadertimeout = 1500
    waitforcards = 1
    waitforcards_extra_delay = 500
    preferlocalcards = 1
    readerrestartseconds = 10
    cachedelay = 120
    max_cache_time = 7
    max_cache_count = 1000
    cacheexwaittime = 50
    cacheexenablestats =
    clienttimeout = 5
    clientmaxidle = 120
    suppresscmd08 = 0
    fallbacktimeout = 2500
    sleep =
    serverip =
    bindwait = 120
    netprio = 1
    resolvegethostbyname = 0
    failbancount = 0
    failbantime = 0
    dropdups = 0
    unlockparental = 1
    double_check = 0
    lb_mode = 0

    [monitor]
    port = 988
    serverip =
    nocrypt = 0.0.0.0-255.255.255.255
    aulow = 120
    monlevel = 4
    hideclient = 30
    appendchaninfo = 1

    [newcamd]
    key = 0102030405060708091011121314
    port = 16000@0B00:000000
    port = 16001@1835:000000
    port = 16002@1838:000000,000401,001103
    serverip =
    allowed = 0.0.0.0-255.255.255.255
    keepalive = 1
    mgclient = 1

    [webif]
    httpport = xxx
    httpcert =
    httpforcesslv3 =
    httpuser = xxxxx
    httppwd = xxxxxxxx
    httpcss = /var/media/ftp/uStor01//cs/oscam//maerklin_Style_mit_Logo.css
    httprefresh = 5
    httphideidleclients = 0
    httpscript =
    httpallowed = 0.0.0.0-192.168.255.255
    httpsavefullcfg = 0
    httpreadonly = 0
    httphelplang = de

    OSCAM SERVER

    [reader]
    detect = CD
    device = /dev/ttyUSB0
    protocol = mouse
    label = reader1
    emmcache = 1,3,2
    caid = 0B00
    ident = 0B00:000000
    group = 1
    mhz = 357
    cardmhz = 357

    [reader]
    detect = CD
    device = /dev/ttyUSB1
    protocol = mouse
    label = reader2
    rsakey = 8xxxhier steht der richtige drinxxx1
    boxkey = 6xxxhier steht der richtige drinxxxB
    emmcache = 1,3,2
    caid = 1835
    ident = 1835:000000
    group = 2
    mhz = 368
    cardmhz = 368

    [reader]
    detect = CD
    device = /dev/ttyUSB2
    protocol = phoenix
    rsakey = Bxxxhier steht der richtige drinxxxF
    boxkey = Axxxhier steht der richtige drinxxxC
    label = reader3
    emmcache = 1,3,2
    caid = 1838
    ident = 1838:000000,1838:001103
    group = 3
    mhz = 368
    cardmhz = 368

    OSCAM USER

    [account]
    user = dm8004
    pwd = dm8004
    group = 1
    au = reader1
    ident = 0B00:000000
    caid = 0B00

    [account]
    user = dm8005
    pwd = dm8005
    group = 2
    au = reader2
    ident = 1835:000000
    caid = 1835

    [account]
    user = dm8006
    pwd = dm8006
    group = 3
    au = reader3
    ident = 1838:000000,1838:001103
    caid = 1838

    CCCAM

    N: 127.0.0.1 16000 dm8004 dm8004 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
    N: 127.0.0.1 16001 dm8005 dm8005 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
    N: 127.0.0.1 16002 dm8006 dm8006 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

    F: xxxxxxxxxxxx
    F: xxxxxxxxxxx
    F: xxxxxxxxxxxxxxx
    F: xxxxxxxxxxxxxx
    F: xxxxxxxxxxxx
    F: xxxxxxxxxxxxxxxx

    SERVER LISTEN PORT : xxxxxx

    SOFTKEY FILE : /var/media/ftp/uStor01/cs/cccam/SoftCam.Key
    AUTOROLL FILE : /var/media/ftp/uStor01/cs/cccam/AutoRoll.Key
    STATIC CW FILE : /var/media/ftp/uStor01/cs/cccam/constant.cw
    CAID PRIO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.prio
    PROVIDERINFO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.providers
    CHANNELINFO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.channelinfo
    LOG WARNINGS : /var/media/ftp/uStor01/cs/cccam/warnings.txt
    cccam Log : /var/media/ftp/uStor01/cs/cccam/cccamlog.txt

    #SERIAL READER : /dev/ttyUSB0 smartreader+
    #SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 3570000

    #SERIAL READER : /dev/ttyUSB1 smartreader+
    #SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB1 3680000

    WEBINFO USERNAME : xxxx
    WEBINFO PASSWORD : xxxxx

    WEBINFO LISTEN PORT : 458
    MINIMUM DOWNHOPS: 1

    ALLOW WEBINFO: yes
    DEBUG: yes
    SHOW TIMING: yes
    DISABLE EMM : no
    EXTRA EMM LEVEL : yes
    EMM THREADS : 3

    und hier mein Problem!!!

    -------------------------------------------------------------------------------
    >> OSCam << cardserver started at Fri Jul 6 17:30:56 2012
    -------------------------------------------------------------------------------
    2012/07/06 17:30:56 0 s starting thread log_list_thread
    2012/07/06 17:30:56 0 s log_list_thread thread started
    2012/07/06 17:30:56 0 s >> OSCam << cardserver started, version 1.20-unstable_by_EasyBuild_svn, build #6586 (mipsel-router-linux-uclibc929)
    2012/07/06 17:30:56 0 s version=1.20-unstable_by_EasyBuild_svn, build #6586, system=mipsel-router-linux, nice=-10
    2012/07/06 17:30:56 0 s client max. idle=120 sec, debug level=0
    2012/07/06 17:30:56 0 s max. logsize=unlimited, loghistorysize=1024 bytes
    2012/07/06 17:30:56 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
    2012/07/06 17:30:56 0 s couldn't open statistics file: 0
    2012/07/06 17:30:56 0 s services reloaded: 0 services freed, 7 services loaded, rejected 0
    2012/07/06 17:30:56 0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
    2012/07/06 17:30:56 0 s signal handling initialized (type=sysv)
    2012/07/06 17:30:56 0 s 213 service-id's loaded in 10ms
    2012/07/06 17:30:56 0 s 213 tier-id's loaded
    2012/07/06 17:30:56 0 s 4 provid's loaded
    2012/07/06 17:30:56 0 s 22 lengths for caid guessing loaded
    2012/07/06 17:30:56 0 s 0 entries read from oscam.whitelist
    2012/07/06 17:30:56 0 s 0 entries read from oscam.cacheex
    2012/07/06 17:30:56 0 s Starting listener 0
    2012/07/06 17:30:56 0 s monitor: initialized (fd=6, port=988, prio=1)
    2012/07/06 17:30:56 0 s Starting listener 0
    2012/07/06 17:30:56 0 s camd33: disabled
    2012/07/06 17:30:56 0 s Starting listener 0
    2012/07/06 17:30:56 0 s camd35: disabled
    2012/07/06 17:30:56 0 s Starting listener 0
    2012/07/06 17:30:56 0 s cs378x: disabled
    2012/07/06 17:30:56 0 s Starting listener 0
    2012/07/06 17:30:56 0 s newcamd: initialized (fd=7, port=16002, prio=1, crypted)
    2012/07/06 17:30:56 0 s -> CAID: 1838 PROVID: 000000, 000401, 001103
    2012/07/06 17:30:56 0 s Starting listener 0
    2012/07/06 17:30:56 0 s pandora: disabled
    2012/07/06 17:30:56 0 s Starting listener 0
    2012/07/06 17:30:56 0 s csp: disabled
    2012/07/06 17:30:56 0 s Starting listener 0
    2012/07/06 17:30:56 0 s radegast: disabled
    2012/07/06 17:30:56 0 s starting thread http
    2012/07/06 17:30:56 0 s http thread started
    2012/07/06 17:30:56 0 s starting thread reader check
    2012/07/06 17:30:56 0 s reader check thread started
    2012/07/06 17:30:56 0 s starting thread check
    2012/07/06 17:30:56 0 s check thread started
    2012/07/06 17:30:56 0 s creating thread for device /dev/ttyUSB0
    2012/07/06 17:30:56 0 s creating thread for device /dev/ttyUSB1
    2012/07/06 17:30:56 0 s creating thread for device /dev/ttyUSB2
    2012/07/06 17:30:56 0 s loadbalancer: can't read from file /tmp/.oscam/stat
    2012/07/06 17:30:56 0 s waiting for local card init
    2012/07/06 17:30:56 5E4A98 h HTTP Server listening on port 459
    2012/07/06 17:30:58 5D02D0 r reader reader1 initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
    2012/07/06 17:30:58 5D1AC8 r reader reader2 initialized (device=/dev/ttyUSB1, detect=cd, mhz=368, cardmhz=368)
    2012/07/06 17:30:58 5E32A0 r reader reader3 initialized (device=/dev/ttyUSB2, detect=cd, mhz=368, cardmhz=368)
    2012/07/06 17:30:59 5D02D0 r reader1 card detected
    2012/07/06 17:30:59 5E32A0 r reader3 card detected
    2012/07/06 17:30:59 5D1AC8 r reader2 card detected
    2012/07/06 17:31:03 5D02D0 r ATR: xxxxxx
    2012/07/06 17:31:03 5D1AC8 r ATR: xxxxxxxxxxxxx
    2012/07/06 17:31:04 5E32A0 r ATR: xxxxxxxxxxxxx
    2012/07/06 17:31:04 5D1AC8 r Maximum frequency for this card is formally 6 Mhz, clocking it to 3.68 Mhz
    2012/07/06 17:31:04 5D02D0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
    2012/07/06 17:31:05 5D1AC8 r detect irdeto tunneled nagra card
    2012/07/06 17:31:05 5D1AC8 r rsa key configured -> using nagra mode
    2012/07/06 17:31:05 5E32A0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
    2012/07/06 17:31:06 5D02D0 r type: Conax, caid: 0B00, serial: xxxxxxx, hex serial: xxxxxxx, card: v64
    2012/07/06 17:31:06 5D02D0 r Providers: 1
    2012/07/06 17:31:06 5D02D0 r Provider: 1 Provider-Id: 000000
    2012/07/06 17:31:06 5D02D0 r Provider: 1 SharedAddress: 002951B3
    2012/07/06 17:31:06 5D02D0 r found cardsystem conax
    2012/07/06 17:31:06 5D1AC8 r [nagra-reader] type: NAGRA, caid: 1835, IRD ID: FF FF FF FF
    2012/07/06 17:31:06 5D1AC8 r [nagra-reader] ProviderID: 00 00 04 01
    2012/07/06 17:31:06 5D1AC8 r [nagra-reader] active to: 2012/09/04 03:00
    2012/07/06 17:31:06 5D02D0 r Package: 1, id: 6020, classes: 01000020, date: 2012/02/01 - 2012/02/29, name: K1
    2012/07/06 17:31:06 5D02D0 r Package: 2, id: 6020, classes: 01001000, date: 2011/12/01 - 2011/12/31, name: K1
    2012/07/06 17:31:06 5D02D0 r Package: 3, id: F004, classes: 01000100, date: 2012/07/01 - 2012/07/31, name: K3
    2012/07/06 17:31:06 5D02D0 r Package: 4, id: F004, classes: 01000100, date: 2012/06/01 - 2012/06/30, name: K3
    2012/07/06 17:31:06 5D02D0 r Package: 5, id: F005, classes: 01FFFFFF, date: 2010/09/08 - 2010/09/18, name: Stellar 2
    2012/07/06 17:31:06 5D02D0 r Package: 6, id: F005, classes: 01FFFFFF, date: 1990/01/01 - 1990/01/01, name: Stellar 2
    2012/07/06 17:31:06 5D02D0 r Package: 7, id: F006, classes: 01BC7AEE, date: 2012/07/01 - 2012/07/31, name: K5
    2012/07/06 17:31:06 5D02D0 r Package: 8, id: F006, classes: 01BC7AEE, date: 2012/06/01 - 2012/06/30, name: K5
    2012/07/06 17:31:06 5D02D0 r Package: 9, id: F008, classes: 012E3DA6, date: 2012/07/01 - 2012/07/31, name: K7
    2012/07/06 17:31:06 5D02D0 r Package: 10, id: F008, classes: 012E3DA6, date: 2012/06/01 - 2012/06/30, name: K7
    2012/07/06 17:31:06 5D02D0 r Package: 11, id: 1010, classes: 01000006, date: 2012/07/01 - 2012/07/31, name: K6
    2012/07/06 17:31:06 5D02D0 r Package: 12, id: 1010, classes: 01000006, date: 2012/06/01 - 2012/06/30, name: K6
    2012/07/06 17:31:06 5D02D0 r [conax-reader] ready for requests
    2012/07/06 17:31:06 5E32A0 r detect native nagra card
    2012/07/06 17:31:07 5E32A0 r [nagra-reader] type: NAGRA, caid: 1838, IRD ID: FF FF FF FF
    2012/07/06 17:31:07 5E32A0 r [nagra-reader] ProviderID: 00 00 04 01
    2012/07/06 17:31:07 5E32A0 r [nagra-reader] active to: 2012/10/06 12:59
    2012/07/06 17:31:07 5E32A0 r -----------------------------------------
    2012/07/06 17:31:07 5E32A0 r |id |tier |valid from |valid to |
    2012/07/06 17:31:07 5E32A0 r +----+--------+------------+------------+
    2012/07/06 17:31:07 5E32A0 r |1103|D4C6 |2010/11/26 |2011/03/31 |
    2012/07/06 17:31:07 5E32A0 r |1103|3189 |2010/11/26 |2011/03/31 |
    2012/07/06 17:31:07 5E32A0 r |1103|3188 |2010/11/26 |2011/03/31 |
    2012/07/06 17:31:07 5E32A0 r |1103|318B |2010/11/26 |2011/03/31 |
    2012/07/06 17:31:07 5E32A0 r |1103|318A |2010/11/26 |2011/03/31 |
    2012/07/06 17:31:07 5E32A0 r |1103|D4A7 |2011/05/27 |2012/10/06 |
    2012/07/06 17:31:08 5E32A0 r -----------------------------------------
    2012/07/06 17:31:08 5E32A0 r found cardsystem nagra
    2012/07/06 17:31:08 5E32A0 r ROM: xxxxxxx
    2012/07/06 17:31:08 5E32A0 r REV: xxxxxx
    2012/07/06 17:31:08 5E32A0 r SER: xxxxxx
    2012/07/06 17:31:08 5E32A0 r CAID: 1838
    2012/07/06 17:31:08 5E32A0 r Prv.ID: 00 00 04 01 (sysid)
    2012/07/06 17:31:08 5E32A0 r Prv.ID: 00 00 00 00
    2012/07/06 17:31:08 5E32A0 r Prv.ID: 00 00 11 03
    2012/07/06 17:31:08 5E32A0 r [nagra-reader] ready for requests
    2012/07/06 17:31:09 5D1AC8 r found cardsystem nagra
    2012/07/06 17:31:09 5D1AC8 r ROM: xxxxxx
    2012/07/06 17:31:09 5D1AC8 r REV: xxxxxx
    2012/07/06 17:31:09 5D1AC8 r SER: xxxxxx
    2012/07/06 17:31:09 5D1AC8 r CAID: 1835
    2012/07/06 17:31:09 5D1AC8 r Prv.ID: 00 00 04 01 (sysid)
    2012/07/06 17:31:09 5D1AC8 r Prv.ID: 00 00 00 00
    2012/07/06 17:31:09 5D1AC8 r [nagra-reader] ready for requests
    2012/07/06 17:31:09 0 s init for all local cards done
    2012/07/06 17:31:09 0 s anti cascading disabled
    2012/07/06 17:31:09 5EAA70 c client connected to 16002 port
    2012/07/06 17:31:09 5EAA70 c anonymous disconnected from 127.0.0.1
    2012/07/06 17:31:09 5EAA70 c thread 4407 ended!
    2012/07/06 17:31:13 5EC670 c client connected to 16002 port
    2012/07/06 17:31:17 5EC670 c encrypted newcamd:16002-client 127.0.0.1 granted (dm8006, au=on (1 reader))
    2012/07/06 17:31:17 5EC670 c user dm8006 authenticated successfully (CCcam)
    2012/07/06 17:31:17 5EC670 c AU enabled for user dm8006 on reader reader3
    2012/07/06 17:31:35 5EC670 c dm8006 (1838&000000/0000/2F46/92:9F99): found (350 ms) by reader3 - SAT.1
    2012/07/06 17:31:36 5EC670 c dm8006 (1838&000000/0000/000C/92:8EC4): not found (545 ms) by reader3 - 1838:000C unknown
    2012/07/06 17:31:44 5EC670 c dm8006 (1838&000000/0000/000C/92:9D31): not found (290 ms) by reader3 - 1838:000C unknown
    2012/07/06 17:31:45 5E32A0 r dm8006 emmtype=shared, len=150, idx=0, cnt=1: written (509 ms) by reader3
    2012/07/06 17:31:54 5EC670 c dm8006 (1838&000000/0000/000C/92:C200): not found (289 ms) by reader3 - 1838:000C unknown
    2012/07/06 17:31:58 5E32A0 r dm8006 emmtype=global, len=150, idx=1, cnt=1: written (511 ms) by reader3
    2012/07/06 17:32:01 5EC670 c dm8006 (1838&000000/0000/2F46/92:F1D4): found (348 ms) by reader3 - SAT.1
    2012/07/06 17:32:02 5E32A0 r dm8006 emmtype=global, len=150, idx=2, cnt=1: written (511 ms) by reader3
    2012/07/06 17:32:04 5EC670 c dm8006 (1838&000000/0000/000C/92:DA5D): not found (291 ms) by reader3 - 1838:000C unknown
    2012/07/06 17:32:11 5EC670 c dm8006 (1838&000000/0000/2F46/92:67CB): found (342 ms) by reader3 - SAT.1


    Ich bekomme die UM02 nicht von der I12 Karte getrennt!

    Die i12 Karte ist eine reine SKY karte und die UM02 eine reine Freetv karte für UM!

    Wenn ich die i12 Karte ohne die um02 karte starte, dann läuft sie ohne Probleme im CAID 1835 und wenn ich OSCAM Server verändere auch im CAID 1722.
    Das selbe Spiel auch mit der UM02 Karte!
    Ohne die i12 Karte bei OSCAM gestartet läuft sie ohne Probleme im CAID 1838

    Sobald ich aber beide über OSCAM starte, geht die i12 nicht mehr und er haut mit sky auf die UM02 (1838) Karte drauf, obwohl er es auf die i12 (1722/1835) drauf hauen soll!!!

    Was mache ich falsch????
     
    #1
  2. phantom

    Nervigen User Advertisement

  3. Kermit
    Online

    Kermit Guest

    AW: Freetz OSCAM mit 0B00(Telecolumbus), 1722/1835 (UMi12) & 1838(UM02) Problem

    Hi,

    du wirst nicht drum rum kommen dir passende Services für deine Karten zu erstellen.

    Grüße

    Kermit
     
    #2
  4. loleke
    Offline

    loleke Freak

    Registriert:
    1. Februar 2009
    Beiträge:
    213
    Zustimmungen:
    7
    Punkte für Erfolge:
    18
    AW: Freetz OSCAM mit 0B00(Telecolumbus), 1722/1835 (UMi12) & 1838(UM02) Problem

    muss ich die jeweils für cccam und oscam erstellen, oder reicht es für oscam???
     
    #3
  5. Kermit
    Online

    Kermit Guest

    AW: Freetz OSCAM mit 0B00(Telecolumbus), 1722/1835 (UMi12) & 1838(UM02) Problem

    Hi,

    in der OScam bei den jeweiligen Readern.
    Wobei du könntest mal probieren, ob es etwas bringt auf Seiten des Clients eine cccam.prio zu erstellen. In dieser dann die Caids an den Anfang stellen, die zuerst abgefragt werden sollen.

    Grüße

    Kermit
     
    #4

Diese Seite empfehlen