1. Diese Seite verwendet Cookies. Wenn du dich weiterhin auf dieser Seite aufhältst, akzeptierst du unseren Einsatz von Cookies. Weitere Informationen

Problema Easymouse 1 Smartmouse Phoenix Programmer 3,58 und 6 Mhz

Dieses Thema im Forum "OScam (Italiana)" wurde erstellt von toni1968, 20. November 2012.

  1. toni1968
    Offline

    toni1968 Spezialist

    Registriert:
    8. Dezember 2008
    Beiträge:
    565
    Zustimmungen:
    70
    Punkte für Erfolge:
    28
    Ciao Raga sa qualcuno se funziona com oscam un un Alix 3d3
     
    #1
  2. phantom

    Nervigen User Advertisement

  3. nemolo
    Offline

    nemolo Ist oft hier

    Registriert:
    16. März 2011
    Beiträge:
    107
    Zustimmungen:
    14
    Punkte für Erfolge:
    0
    AW: Easymouse 1 Smartmouse Phoenix Programmer 3,58 und 6 Mhz

    Ciao
    si debian / oscam dovrebbe funziona con un Alix 3d3 vedendo il hardware che ha.

    Quarda qua

    Dieser Link ist nur für Mitglieder!!! Jetzt kostenlos Registrieren ?

     
    #2
  4. toni1968
    Offline

    toni1968 Spezialist

    Registriert:
    8. Dezember 2008
    Beiträge:
    565
    Zustimmungen:
    70
    Punkte für Erfolge:
    28
    AW: Easymouse 1 Smartmouse Phoenix Programmer 3,58 und 6 Mhz

    Si grazie con il easymouse 2 non ci sono problemi e il easymouse 1 che non riesco ha fallo camminare con oscam dibian
     
    #3
  5. nemolo
    Offline

    nemolo Ist oft hier

    Registriert:
    16. März 2011
    Beiträge:
    107
    Zustimmungen:
    14
    Punkte für Erfolge:
    0
    AW: Easymouse 1 Smartmouse Phoenix Programmer 3,58 und 6 Mhz

    che fa oscam, non lo trova?
    che errore ti manda oscam?
    fai un log per vedere dove e il problema?
    come lo hai connesso il easymouse?
     
    #4
  6. toni1968
    Offline

    toni1968 Spezialist

    Registriert:
    8. Dezember 2008
    Beiträge:
    565
    Zustimmungen:
    70
    Punkte für Erfolge:
    28
    AW: Easymouse 1 Smartmouse Phoenix Programmer 3,58 und 6 Mhz

    Quest e tramite com non so come configurare oscam server :

    Dieser Link ist nur für Mitglieder!!! Jetzt kostenlos Registrieren ?


    non lo prorio riconosce l`oscam
     
    #5
  7. nemolo
    Offline

    nemolo Ist oft hier

    Registriert:
    16. März 2011
    Beiträge:
    107
    Zustimmungen:
    14
    Punkte für Erfolge:
    0
    AW: Easymouse 1 Smartmouse Phoenix Programmer 3,58 und 6 Mhz

    come hai configurato oscam.server?
     
    #6
  8. toni1968
    Offline

    toni1968 Spezialist

    Registriert:
    8. Dezember 2008
    Beiträge:
    565
    Zustimmungen:
    70
    Punkte für Erfolge:
    28
    AW: Easymouse 1 Smartmouse Phoenix Programmer 3,58 und 6 Mhz

    Ho gia fatto un sacco di prove ma niente da fare si deve connettere con il com port con alix e tramite usb arriva la correnta al easymouse qua il server
    [reader]
    label = tivusat
    description =
    enable = 1
    protocol = internal
    device = /dev/ttyS0
    device_out_endpoint = 0x 0
    key =
    password =
    pincode = none
    readnano =
    services = tivusat
    resetcycle = 0
    smargopatch = 0
    sc8in1_dtrrts_patch = 0
    fallback = 0
    cacheex = 0
    cacheex_maxhop = 0
    logport = 0
    caid =
    boxid =
    fix9993 = 0
    rsakey = A9.....B5
    ins7e =
    ins7e11 =
    force_irdeto = 0
    boxkey =
    atr =
    ecmwhitelist = 183D@005411:8C,B7
    ecmheaderwhitelist =
    detect = cd
    nagra_read = 0
    mhz = 600
    cardmhz = 357
    ident =
    chid =
    class =
    aeskeys =
    group = 1
    emmcache = 1,3,2
    forse mangono i treiber per alix
     
    #7
  9. nemolo
    Offline

    nemolo Ist oft hier

    Registriert:
    16. März 2011
    Beiträge:
    107
    Zustimmungen:
    14
    Punkte für Erfolge:
    0
    AW: Easymouse 1 Smartmouse Phoenix Programmer 3,58 und 6 Mhz

    prova

    protocol = mouse

    e riavvia il sistema
     
    #8
  10. toni1968
    Offline

    toni1968 Spezialist

    Registriert:
    8. Dezember 2008
    Beiträge:
    565
    Zustimmungen:
    70
    Punkte für Erfolge:
    28
    AW: Easymouse 1 Smartmouse Phoenix Programmer 3,58 und 6 Mhz

    Niente da fare
     
    #9
  11. nemolo
    Offline

    nemolo Ist oft hier

    Registriert:
    16. März 2011
    Beiträge:
    107
    Zustimmungen:
    14
    Punkte für Erfolge:
    0
    AW: Easymouse 1 Smartmouse Phoenix Programmer 3,58 und 6 Mhz

    puoi postare un log
     
    #10
    toni1968 gefällt das.
  12. toni1968
    Offline

    toni1968 Spezialist

    Registriert:
    8. Dezember 2008
    Beiträge:
    565
    Zustimmungen:
    70
    Punkte für Erfolge:
    28
    AW: Easymouse 1 Smartmouse Phoenix Programmer 3,58 und 6 Mhz

    E uquale mi sono ordinato un adapter usb con com port dopo ti faccio sapere
     
    #11
  13. meister85
    Offline

    meister85 VIP

    Registriert:
    21. September 2009
    Beiträge:
    7.927
    Zustimmungen:
    5.229
    Punkte für Erfolge:
    113
    AW: Easymouse 1 Smartmouse Phoenix Programmer 3,58 und 6 Mhz

    @Toni: Sarebbe stato molto utile un syslog e il dmesg

    Cosi possiamo vedere dove ce/era il problema.
     
    #12
  14. toni1968
    Offline

    toni1968 Spezialist

    Registriert:
    8. Dezember 2008
    Beiträge:
    565
    Zustimmungen:
    70
    Punkte für Erfolge:
    28
    AW: Easymouse 1 Smartmouse Phoenix Programmer 3,58 und 6 Mhz

    Ok Meister85 qua il log:
    Code:
    >> OSCam <<  cardserver started at Wed Nov 21 13:14:35 2012-------------------------------------------------------------------------------
    2012/11/21 13:14:35        0 s starting thread log_list_thread
    2012/11/21 13:14:35        0 s log_list_thread thread started
    2012/11/21 13:14:35        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build #7938 (i486-linux-gnu)
    2012/11/21 13:14:35        0 s version=1.20-unstable_svn, build #7938, system=i486-linux-gnu, nice=-1
    2012/11/21 13:14:35        0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
    2012/11/21 13:14:35        0 s max. logsize=512 Kb, loghistorysize=4096 bytes
    2012/11/21 13:14:35        0 s client timeout=5000 ms, fallback timeout=2600 ms, cache delay=120 ms
    2012/11/21 13:14:35        0 s services reloaded: 0 services freed, 27 services loaded, rejected 0
    2012/11/21 13:14:35        0 s userdb reloaded: 27 accounts loaded, 0 expired, 0 disabled
    2012/11/21 13:14:35        0 s signal handling initialized (type=sysv)
    2012/11/21 13:14:35        0 s 787 service-id's loaded in 11ms
    2012/11/21 13:14:35        0 s 49 tier-id's loaded
    2012/11/21 13:14:35        0 s 928 provid's loaded
    2012/11/21 13:14:35        0 s ERROR: Cannot open file "/var/etc/oscam.guess" (errno=2 No such file or directory)
    2012/11/21 13:14:35        0 s ERROR: Cannot open file "/var/etc/oscam.ird" (errno=2 No such file or directory)
    2012/11/21 13:14:35        0 s 0 entries read from oscam.whitelist
    2012/11/21 13:14:35        0 s ERROR: Cannot open file "/var/etc/oscam.cacheex" (errno=2 No such file or directory)
    2012/11/21 13:14:35        0 s Starting listener 0
    2012/11/21 13:14:35        0 s monitor: initialized (fd=6, port=988, ip=192.168.178.27)
    2012/11/21 13:14:35        0 s Starting listener 0
    2012/11/21 13:14:35        0 s camd35: disabled
    2012/11/21 13:14:35        0 s Starting listener 0
    2012/11/21 13:14:35        0 s cs378x: disabled
    2012/11/21 13:14:35        0 s Starting listener 0
    2012/11/21 13:14:35        0 s newcamd: disabled
    2012/11/21 13:14:35        0 s Starting listener 0
    2012/11/21 13:14:35        0 s cccam: initialized (fd=7, port=123456, ip=192.168.178.27, crypted)
    2012/11/21 13:14:35        0 s Starting listener 0
    2012/11/21 13:14:35        0 s pandora: disabled
    2012/11/21 13:14:35        0 s Starting listener 0
    2012/11/21 13:14:35        0 s csp: disabled
    2012/11/21 13:14:35        0 s Starting listener 0
    2012/11/21 13:14:35        0 s radegast: disabled
    2012/11/21 13:14:35        0 s starting thread http
    2012/11/21 13:14:35        0 s http thread started
    2012/11/21 13:14:35        0 s starting thread reader check
    2012/11/21 13:14:35        0 s reader check thread started
    2012/11/21 13:14:35        0 s starting thread check
    2012/11/21 13:14:35        0 s check thread started
    2012/11/21 13:14:35        0 s tivusat [internal] creating thread for device /dev/ttyS0
    2012/11/21 13:14:35        0 s loadbalancer: can't read from file /usr/local/etc/.oscam/stat
    2012/11/21 13:14:35        0 s waiting for local card init
    2012/11/21 13:14:35  955EA70 r tivusat [internal] Reader initialized (device=/dev/ttyS0, detect=cd, mhz=357, cardmhz=357)
    2012/11/21 13:14:35  95B6068 h HTTP Server listening on port 65432
    2012/11/21 13:14:36        0 s init for all local cards done
    2012/11/21 13:14:36        0 s anti cascading disabled
    2012/11/21 13:14:39  95B8C28 c encrypted cccam-client 192.168.178.21 granted (Octagon, au=on (1 reader))
     
    Zuletzt von einem Moderator bearbeitet: 21. November 2012
    #13
  15. meister85
    Offline

    meister85 VIP

    Registriert:
    21. September 2009
    Beiträge:
    7.927
    Zustimmungen:
    5.229
    Punkte für Erfolge:
    113
    AW: Easymouse 1 Smartmouse Phoenix Programmer 3,58 und 6 Mhz

    Ciao Toni,

    non dico il oscam log, serve il syslog e il dmesg
     
    #14
  16. toni1968
    Offline

    toni1968 Spezialist

    Registriert:
    8. Dezember 2008
    Beiträge:
    565
    Zustimmungen:
    70
    Punkte für Erfolge:
    28
    AW: Easymouse 1 Smartmouse Phoenix Programmer 3,58 und 6 Mhz

    Ok Qua il syslog:
    Code:
    Nov 21 13:49:34 IPC-Server kernel: [    5.828509] Failure reading codec reg 0x0,Last value=0x0Nov 21 13:49:34 IPC-Server kernel: [    5.828659] Failure writing to cs5535 codec
    Nov 21 13:49:34 IPC-Server kernel: [    5.828807] Failure reading codec reg 0x7c,Last value=0x0
    Nov 21 13:49:34 IPC-Server kernel: [    5.828957] Failure writing to cs5535 codec
    Nov 21 13:49:34 IPC-Server kernel: [    5.829106] Failure reading codec reg 0x7e,Last value=0x0
    Nov 21 13:49:34 IPC-Server kernel: [    5.829258] Failure writing to cs5535 codec
    Nov 21 13:49:34 IPC-Server kernel: [    5.829404] Failure writing to cs5535 codec
    Nov 21 13:49:34 IPC-Server kernel: [    5.829552] Failure reading codec reg 0x1c,Last value=0x0
    Nov 21 13:49:34 IPC-Server kernel: [    5.832361] Failure writing to cs5535 codec
    Nov 21 13:49:34 IPC-Server kernel: [    5.832510] Failure reading codec reg 0x0,Last value=
    Nov 21 13:49:35 IPC-Server kernel: [    6.505022] AC'97 0 access is not valid [0x0], removing mixer.
    Nov 21 13:49:35 IPC-Server kernel: [    6.505061] mixer failed
    Nov 21 13:49:35 IPC-Server kernel: [    6.505168] cs5535audio: probe of 0000:00:0f.3 failed with error -5
    Nov 21 13:49:35 IPC-Server kernel: [    7.754454] loop: module loaded
    Nov 21 13:49:35 IPC-Server kernel: [    7.846930] natsemi dp8381x driver, version 2.1, Sept 11, 2006
    Nov 21 13:49:35 IPC-Server kernel: [    7.846943]   originally by Donald Becker 
    Nov 21 13:49:35 IPC-Server kernel: [    7.846953]   2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
    Nov 21 13:49:35 IPC-Server kernel: [    7.897738] lib80211: common routines for IEEE802.11 drivers
    Nov 21 13:49:35 IPC-Server kernel: [    7.897760] lib80211_crypt: registered algorithm 'NULL'
    Nov 21 13:49:35 IPC-Server kernel: [    9.633340] eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
    Nov 21 13:49:35 IPC-Server acpid: cannot open input layer
    Nov 21 13:49:35 IPC-Server acpid: starting up with netlink and the input layer
    Nov 21 13:49:35 IPC-Server acpid: 1 rule loaded
    Nov 21 13:49:35 IPC-Server acpid: waiting for events: event logging is off
    Nov 21 13:49:36 IPC-Server dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
    Nov 21 13:49:36 IPC-Server /usr/sbin/cron[729]: (CRON) INFO (pidfile fd = 3)
    Nov 21 13:49:36 IPC-Server /usr/sbin/cron[730]: (CRON) STARTUP (fork ok)
    Nov 21 13:49:36 IPC-Server /usr/sbin/cron[730]: (CRON) INFO (Running @reboot jobs)
    Nov 21 13:49:37 IPC-Server dhclient: DHCPOFFER from 192.168.178.1
    Nov 21 13:49:37 IPC-Server dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67
    Nov 21 13:49:37 IPC-Server dhclient: DHCPACK from 192.168.178.1
    Nov 21 13:49:37 IPC-Server dhclient: bound to 192.168.178.27 -- renewal in 384929 seconds.
    Nov 21 13:49:43 IPC-Server kernel: [   20.071680] eth0: no IPv6 routers present
    Nov 21 13:49:48 IPC-Server ntpdate[843]: adjust time server 192.53.103.108 offset -0.095057 sec
    Nov 21 13:50:01 IPC-Server /USR/SBIN/CRON[996]: (root) CMD (/var/emu/script/oscam-watchdo


    e qua l`altro
    Code:
    [13:49:24 21.11.2012] w USB device strings: Mfr=3, Product=2, SerialNumber=1
    [13:49:28 21.11.2012]  usb usb1: Product: EHCI Host Controller
    [13:49:28 21.11.2012]  usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
    [13:49:28 21.11.2012]  usb usb1: SerialNumber: 0000:00:0f.5
    [13:49:28 21.11.2012]  usb usb1: configuration #1 chosen from 1 choice
    [13:49:28 21.11.2012]  hub 1-0:1.0: USB hub found
    [13:49:28 21.11.2012]  hub 1-0:1.0: 4 ports detected
    [13:49:28 21.11.2012]  libata version 3.00 loaded.
    [13:49:28 21.11.2012]  ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [13:49:28 21.11.2012]  ohci_hcd 0000:00:0f.4: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
    [13:49:28 21.11.2012]  ohci_hcd 0000:00:0f.4: setting latency timer to 64
    [13:49:28 21.11.2012]  ohci_hcd 0000:00:0f.4: OHCI Host Controller
    [13:49:28 21.11.2012]  ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
    [13:49:28 21.11.2012]  ohci_hcd 0000:00:0f.4: irq 10, io mem 0xefffe000
    [13:49:28 21.11.2012]  usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
    [13:49:28 21.11.2012]  usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [13:49:28 21.11.2012]  usb usb2: Product: OHCI Host Controller
    [13:49:28 21.11.2012]  usb usb2: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
    [13:49:28 21.11.2012]  usb usb2: SerialNumber: 0000:00:0f.4
    [13:49:28 21.11.2012]  usb usb2: configuration #1 chosen from 1 choice
    [13:49:28 21.11.2012]  hub 2-0:1.0: USB hub found
    [13:49:28 21.11.2012]  hub 2-0:1.0: 4 ports detected
    [13:49:28 21.11.2012]  pata_amd 0000:00:0f.2: version 0.4.1
    [13:49:28 21.11.2012]  scsi0 : pata_amd
    [13:49:28 21.11.2012]  scsi1 : pata_amd
    [13:49:28 21.11.2012]  ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
    [13:49:28 21.11.2012]  ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
    [13:49:28 21.11.2012]  ata1.00: CFA: TS4GCF133, 20100202, max UDMA/66
    [13:49:28 21.11.2012]  ata1.00: 7831152 sectors, multi 0: LBA
    [13:49:28 21.11.2012]  ata1.00: configured for UDMA/66
    [13:49:28 21.11.2012]  scsi 0:0:0:0: Direct-Access     ATA      TS4GCF133        2010 PQ: 0 ANSI: 5
    [13:49:28 21.11.2012]  ata2: port disabled. ignoring.
    [13:49:28 21.11.2012]  sd 0:0:0:0: [sda] 7831152 512-byte logical blocks: (4.00 GB/3.73 GiB)
    [13:49:28 21.11.2012]  sd 0:0:0:0: [sda] Write Protect is off
    [13:49:28 21.11.2012]  sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [13:49:28 21.11.2012]  sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    [13:49:28 21.11.2012]   sda: sda1
    [13:49:28 21.11.2012]  sd 0:0:0:0: [sda] Attached SCSI disk
    [13:49:28 21.11.2012]  usb 2-1: new low speed USB device using ohci_hcd and address 2
    [13:49:28 21.11.2012]  usb 2-1: New USB device found, idVendor=04d9, idProduct=1503
    [13:49:28 21.11.2012]  usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [13:49:28 21.11.2012]  usb 2-1: Product: USB Keyboard
    [13:49:28 21.11.2012]  usb 2-1: Manufacturer:
    [13:49:28 21.11.2012]  usb 2-1: configuration #1 chosen from 1 choice
    [13:49:29 21.11.2012]  udev[214]: starting version 164
    [13:49:29 21.11.2012]  cs5535_gpio: base=0x6100 mask=0xb003c66 major=252
    [13:49:30 21.11.2012]  processor LNXCPU:00: registered as cooling_device0
    [13:49:30 21.11.2012]  input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
    [13:49:30 21.11.2012]  ACPI: Power Button [PWRF]
    [13:49:30 21.11.2012]  AMD Geode RNG detected
    [13:49:30 21.11.2012]  ACPI: AC Adapter [AC] (on-line)
    [13:49:30 21.11.2012]  usbcore: registered new interface driver hiddev
    [13:49:30 21.11.2012]  input:   USB Keyboard as /devices/pci0000:00/0000:00:0f.4/usb2/2-1/2-1:1.0/input/input1
    [13:49:30 21.11.2012]  generic-usb 0003:04D9:1503.0001: input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:0f.4-1/input0
    [13:49:30 21.11.2012]  input:   USB Keyboard as /devices/pci0000:00/0000:00:0f.4/usb2/2-1/2-1:1.1/input/input2
    [13:49:30 21.11.2012]  generic-usb 0003:04D9:1503.0002: input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:0f.4-1/input1
    [13:49:30 21.11.2012]  usbcore: registered new interface driver usbhid
    [13:49:30 21.11.2012]  usbhid: v2.6:USB HID core driver
    [13:49:30 21.11.2012]  ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
    [13:49:30 21.11.2012]  Geode LX AES 0000:00:01.2: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
    [13:49:30 21.11.2012]  input: PC Speaker as /devices/platform/pcspkr/input/input3
    [13:49:31 21.11.2012]  padlock: VIA PadLock not detected.
    [13:49:31 21.11.2012]  geode-aes: GEODE AES engine enabled.
    [13:49:31 21.11.2012]  cs5535audio 0000:00:0f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
    [13:49:31 21.11.2012]  cs5535audio 0000:00:0f.3: setting latency timer to 64
    [13:49:32 21.11.2012]  loop: module loaded
    [13:49:33 21.11.2012]  eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
     
    Zuletzt von einem Moderator bearbeitet: 21. November 2012
    #15

Diese Seite empfehlen