1. Diese Seite verwendet Cookies. Wenn du dich weiterhin auf dieser Seite aufhältst, akzeptierst du unseren Einsatz von Cookies. Weitere Informationen

Debian & Smargo Fehler

Dieses Thema im Forum "Archiv" wurde erstellt von massendaten, 2. Mai 2010.

  1. massendaten
    Offline

    massendaten Spezialist

    Registriert:
    23. April 2009
    Beiträge:
    534
    Zustimmungen:
    82
    Punkte für Erfolge:
    28
    Hi,

    Habe hier einen kleinen Server mit Debian 5.0 nach Anleitung von hier:

    Dieser Link ist nur für Mitglieder!!! Jetzt kostenlos Registrieren ?



    aufgesetzt, alles Wunderbar bis die Smargos in Spiel kommen.

    Smargo ist wie folgt Eingstellt:

    Code:
    AUTO
    NORMAL
    0
    0
    Probiert wurde auch

    Code:
    AUTO
    NORMAL
    1
    0
    cccam.cfg:

    Code:
    Debian Linux 5.0.4 / CCcam 2.1.3 server
    SERVER LISTEN PORT : 12000 
    SERIAL READER : /dev/ttyUSB0 smartreader+ (MTV)
    #SERIAL READER : /dev/ttyUSB1 smartreader+ 
    #SERIAL READER : /dev/ttyUSB2 smartreader+ 
    SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 3750000
    #SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB1 3750000
    #SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB2 3750000
    
    DISABLE EMM : no
    SHOW TIMING : yes
    EXTRA EMM LEVEL : yes
    
    CAID PRIO FILE : /var/keys/CCcam.prio
    PROVIDERINFO FILE : /var/keys/CCcam.providers
    CHANNELINFO FILE : /var/keys/CCcam.channelinfo
    
    WEBINFO USERNAME : xxxx
    WEBINFO PASSWORD : xxxxx
    
    Fehlermeldung mit einem Smargo direkt am Server:

    Code:
    [  776.705045] ftdi_sio: urb failed to clear flow control
    [  781.705637] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
    [  782.705038] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [  783.708023] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [  788.708037] ftdi_sio: urb failed to clear flow control
    [  793.705639] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
    [  798.706238] ftdi_sio: error from flowcontrol urb
    [  803.708039] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
    [  811.121983] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [  812.121374] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [  817.121986] ftdi_sio: urb failed to clear flow control
    [  822.122571] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
    [  823.121979] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [  824.121387] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [  829.121959] ftdi_sio: urb failed to clear flow control
    [  834.122614] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
    [  839.123173] ftdi_sio: error from flowcontrol urb
    [  844.124037] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
    [  850.124035] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [  851.123188] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [  856.123802] ftdi_sio: urb failed to clear flow control
    [  861.120774] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
    [  862.123772] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [  863.123192] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [  868.123790] ftdi_sio: urb failed to clear flow control
    [  873.120784] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
    [  878.121335] ftdi_sio: error from flowcontrol urb
    [  883.121969] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
    [  890.124036] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [  891.120769] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [  896.121369] ftdi_sio: urb failed to clear flow control
    [  901.121971] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
    [  902.121351] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [  903.120763] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [  908.121357] ftdi_sio: urb failed to clear flow control
    [  913.121995] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
    [  918.122531] ftdi_sio: error from flowcontrol urb
    [  923.123187] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
    [  930.124036] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [  931.121950] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [  936.122551] ftdi_sio: urb failed to clear flow control
    [  941.123182] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
    [  942.122553] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [  943.121969] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [  948.122557] ftdi_sio: urb failed to clear flow control
    [  953.123197] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
    [  958.123755] ftdi_sio: error from flowcontrol urb
    [  963.120768] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
    [  970.124035] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [  971.123174] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [  976.123773] ftdi_sio: urb failed to clear flow control
    [  981.120775] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
    [  982.123759] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [  983.123171] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [  988.123782] ftdi_sio: urb failed to clear flow control
    [  993.120767] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
    [  998.121329] ftdi_sio: error from flowcontrol urb
    [ 1003.121972] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
    [ 1010.124037] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [ 1011.120625] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [ 1016.121340] ftdi_sio: urb failed to clear flow control
    [ 1021.121971] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
    [ 1022.121328] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [ 1023.120616] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [ 1028.121326] ftdi_sio: urb failed to clear flow control
    [ 1033.121962] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
    [ 1038.122552] ftdi_sio: error from flowcontrol urb
    [ 1043.123188] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
    [ 1050.124044] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [ 1051.121962] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [ 1056.122533] ftdi_sio: urb failed to clear flow control
    [ 1061.124031] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
    [ 1062.124039] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [ 1063.121948] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [ 1068.122551] ftdi_sio: urb failed to clear flow control
    [ 1073.123149] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
    [ 1077.160954] usb 1-1.2: USB disconnect, address 3
    [ 1077.160954] ftdi_sio 1-1.2:1.0: device disconnected
    [ 1078.122436] ftdi_sio: error from flowcontrol urb
    [ 1083.124018] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
    [ 1084.122260] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
    [ 1090.123225] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [ 1091.122287] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [ 1096.122803] ftdi_sio: urb failed to clear flow control
    [ 1101.121607] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
    [ 1102.122428] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [ 1103.122268] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [ 1108.122432] ftdi_sio: urb failed to clear flow control
    [ 1113.124036] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
    [ 1118.121778] ftdi_sio: error from flowcontrol urb
    [ 1123.125418] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
    [ 1130.123168] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [ 1131.121596] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [ 1136.121740] ftdi_sio: urb failed to clear flow control
    [ 1141.121934] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
    [ 1142.121788] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [ 1143.121599] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [ 1148.121760] ftdi_sio: urb failed to clear flow control
    [ 1153.121973] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
    [ 1158.122093] ftdi_sio: error from flowcontrol urb
    [ 1163.122275] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
    [ 1170.122820] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [ 1171.121921] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [ 1176.122082] ftdi_sio: urb failed to clear flow control
    [ 1181.122263] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
    [ 1182.124054] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [ 1183.121929] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [ 1188.122089] ftdi_sio: urb failed to clear flow control
    [ 1193.122282] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
    [ 1198.122431] ftdi_sio: error from flowcontrol urb
    [ 1203.124021] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
    [ 1210.123067] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [ 1211.122259] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [ 1216.122565] ftdi_sio: urb failed to clear flow control
    [ 1221.121636] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
    [ 1222.122421] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [ 1223.122272] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [ 1228.122422] ftdi_sio: urb failed to clear flow control
    [ 1233.124019] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
    [ 1238.121762] ftdi_sio: error from flowcontrol urb
    [ 1243.121943] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
    [ 1250.122454] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [ 1251.121980] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [ 1256.121750] ftdi_sio: urb failed to clear flow control
    [ 1261.122668] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
    [ 1262.121761] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [ 1263.124018] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [ 1268.121760] ftdi_sio: urb failed to clear flow control
    [ 1273.121953] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
    [ 1278.125579] ftdi_sio: error from flowcontrol urb
    [ 1283.122268] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
    [ 1290.125583] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [ 1291.121921] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [ 1296.122085] ftdi_sio: urb failed to clear flow control
    [ 1301.122270] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
    [ 1302.122098] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [ 1303.121921] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [ 1308.122124] ftdi_sio: urb failed to clear flow control
    [ 1309.888355] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -84
    [ 1309.889152] ftdi_sio: error from flowcontrol urb
    [ 1309.934095] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
    [ 1309.956962] usb 1-1.6: USB disconnect, address 4
    [ 1309.956962] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
    [ 1309.957270] ftdi_sio 1-1.6:1.0: device disconnected
    [ 1357.116646] usb 1-1: USB disconnect, address 2
    [ 1410.481598] hub 1-0:1.0: unable to enumerate USB device on port 1
    [ 1410.786653] usb 1-1: new full speed USB device using uhci_hcd and address 6
    [ 1410.955511] usb 1-1: configuration #1 chosen from 1 choice
    [ 1410.960053] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
    [ 1410.960053] ftdi_sio: Detected FT232BM
    [ 1410.960053] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
    [ 1410.964056] usb 1-1: New USB device found, idVendor=0403, idProduct=6001
    [ 1410.964056] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=3
    [ 1410.964056] usb 1-1: SerialNumber: Reader C6C91AE
    [ 1652.592442] usb 1-1: USB disconnect, address 6
    [ 1652.593794] ftdi_sio 1-1:1.0: device disconnected
    [ 1652.810017] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
    [ 1697.069221] usb 1-1: new full speed USB device using uhci_hcd and address 7
    [ 1697.131236] hub 1-0:1.0: unable to enumerate USB device on port 1
    [ 1697.419378] hub 1-0:1.0: unable to enumerate USB device on port 1
    [ 1697.723003] usb 1-1: new full speed USB device using uhci_hcd and address 9
    [ 1697.887175] usb 1-1: configuration #1 chosen from 1 choice
    [ 1697.892055] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
    [ 1697.892055] ftdi_sio: Detected FT232BM
    [ 1697.892055] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
    [ 1697.896058] usb 1-1: New USB device found, idVendor=0403, idProduct=6001
    [ 1697.896058] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=3
    [ 1697.896058] usb 1-1: SerialNumber: Reader C6C91AE
    [ 1847.524030] usb 1-1: USB disconnect, address 9
    [ 1847.524030] ftdi_sio 1-1:1.0: device disconnected
    [ 1848.038943] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
    [ 1887.192761] usb 1-1: new full speed USB device using uhci_hcd and address 10
    [ 1887.362102] usb 1-1: configuration #1 chosen from 1 choice
    [ 1887.368054] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
    [ 1887.368054] ftdi_sio: Detected FT232BM
    [ 1887.368054] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
    [ 1887.372099] usb 1-1: New USB device found, idVendor=0403, idProduct=6001
    [ 1887.372099] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=3
    [ 1887.372099] usb 1-1: SerialNumber: Reader 118
    [ 2485.872339] usb 1-1: USB disconnect, address 10
    [ 2485.873682] ftdi_sio 1-1:1.0: device disconnected
    [ 2486.082240] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
    [ 2494.344608] usb 1-1: new full speed USB device using uhci_hcd and address 11
    [ 2494.515862] usb 1-1: configuration #1 chosen from 1 choice
    [ 2494.520059] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
    [ 2494.520059] ftdi_sio: Detected FT232BM
    [ 2494.520059] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
    [ 2494.524089] usb 1-1: New USB device found, idVendor=0403, idProduct=6001
    [ 2494.524089] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=3
    [ 2494.524089] usb 1-1: SerialNumber: Reader C6C91AE
    [ 2932.726401] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS LOW
    [ 2937.728014] ftdi_sio: error from flowcontrol urb
    [ 2942.725721] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
    [ 2950.728020] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [ 2951.726198] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [ 2956.728020] ftdi_sio: urb failed to clear flow control
    [ 2961.725542] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
    [ 2962.726373] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [ 2963.726216] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [ 2968.726277] ftdi_sio: urb failed to clear flow control
    [ 2973.728018] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
    [ 2978.725711] ftdi_sio: error from flowcontrol urb
    [ 2983.725880] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
    [ 2990.725693] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [ 2991.725545] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [ 2996.723701] ftdi_sio: urb failed to clear flow control
    [ 3001.726001] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
    [ 3002.729202] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [ 3003.726010] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [ 3008.725701] ftdi_sio: urb failed to clear flow control
    [ 3013.725893] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
    [ 3018.726038] ftdi_sio: error from flowcontrol urb
    [ 3023.726218] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
    [ 3030.725925] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [ 3031.726036] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [ 3036.726020] ftdi_sio: urb failed to clear flow control
    [ 3041.726212] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
    [ 3042.726038] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [ 3043.725874] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [ 3048.726045] ftdi_sio: urb failed to clear flow control
    [ 3053.726221] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
    [ 3058.726374] ftdi_sio: error from flowcontrol urb
    [ 3063.728048] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
    [ 3070.726367] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [ 3071.726291] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [ 3076.726361] ftdi_sio: urb failed to clear flow control
    [ 3081.725541] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
    [ 3082.726366] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [ 3083.726211] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [ 3088.726366] ftdi_sio: urb failed to clear flow control
    [ 3093.729030] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
    [ 3098.725702] ftdi_sio: error from flowcontrol urb
    [ 3103.725880] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
    [ 3110.725707] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [ 3111.725536] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [ 3116.725690] ftdi_sio: urb failed to clear flow control
    [ 3121.725869] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
    [ 3122.725701] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [ 3123.728017] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [ 3128.725701] ftdi_sio: urb failed to clear flow control
    [ 3133.725888] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
    [ 3138.726034] ftdi_sio: error from flowcontrol urb
    
    Fehlermeldung cccam

    Code:
    card reader /dev/ttyUSB0 
    no or unknown card inserted 
    
    card reader /dev/ttyUSB1 
    no or unknown card inserted 
    
    card reader /dev/ttyUSB2 
    no or unknown card inserted 
    
    --------------

    Fehlermeldung mit 7Port Dlink USB HUB 3 x Smargo:

    Code:
     ACPI: CPU0 (power states: C1[C1] C2[C2])
    [    5.476026] ACPI: ACPI0007:00 is registered as cooling_device0
    [    5.496025] ACPI: LNXTHERM:01 is registered as thermal_zone0
    [    5.505455] ACPI: Thermal Zone [THM] (35 C)
    [    7.491303] ACPI: ACPI Dock Station Driver
    [    8.296058] SCSI subsystem initialized
    [    8.376041] usbcore: registered new interface driver usbfs
    [    8.376041] usbcore: registered new interface driver hub
    [    8.376041] usbcore: registered new device driver usb
    [    8.416033] USB Universal Host Controller Interface driver v3.0
    [    8.416725] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    [    8.416858] uhci_hcd 0000:00:07.2: UHCI Host Controller
    [    8.417838] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
    [    8.418050] uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dce0
    [    8.419442] usb usb1: configuration #1 chosen from 1 choice
    [    8.419913] hub 1-0:1.0: USB hub found
    [    8.420029] hub 1-0:1.0: 2 ports detected
    [    8.524033] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
    [    8.524033] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    8.524033] usb usb1: Product: UHCI Host Controller
    [    8.524033] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
    [    8.524033] usb usb1: SerialNumber: 0000:00:07.2
    [    8.656047] Floppy drive(s): fd0 is 1.44M
    [    8.656047] libata version 3.00 loaded.
    [    8.672019] FDC 0 is a post-1991 82077
    [    8.724020] hub 1-0:1.0: unable to enumerate USB device on port 1
    [    8.728040] Uniform Multi-Platform E-IDE driver
    [    8.728040] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    [    8.744038] PIIX4: IDE controller (0x8086:0x7111 rev 0x01) at  PCI slot 0000:00:07.1
    [    8.744038] PIIX4: not 100% native mode: will probe irqs later
    [    8.744038]     ide0: BM-DMA at 0x0860-0x0867
    [    8.744038]     ide1: BM-DMA at 0x0868-0x086f
    [    8.744038] Probing IDE interface ide0...
    [    8.916039] Marking TSC unstable due to: TSC halts in idle.
    [    9.028022] hda: IBM-DARA-212000, ATA DISK drive
    [    9.075635] usb 1-1: new full speed USB device using uhci_hcd and address 3
    [    9.218919] usb 1-1: configuration #1 chosen from 1 choice
    [    9.220029] hub 1-1:1.0: USB hub found
    [    9.220029] hub 1-1:1.0: 7 ports detected
    [    9.334754] usb 1-1: New USB device found, idVendor=2001, idProduct=f103
    [    9.334816] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [    9.698108] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
    [    9.699462] hda: UDMA/33 mode selected
    [    9.700021] Probing IDE interface ide1...
    [   10.424870] hdc: SAMSUNG CD-ROM SN-124, ATAPI CD/DVD-ROM drive
    [   11.096789] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
    [   11.097345] hdc: UDMA/33 mode selected
    [   11.098590] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    [   11.118191] ide1 at 0x170-0x177,0x376 on irq 15
    [   11.244043] hda: max request size: 128KiB
    [   11.268025] hda: 23579136 sectors (12072 MB) w/418KiB Cache, CHS=23392/16/63
    [   11.268025] hda: cache flushes not supported
    [   11.268025]  hda: hda1 hda2 < hda5 >
    [   11.327283] hdc: ATAPI 24X CD-ROM drive, 128kB Cache
    [   11.327371] Uniform CD-ROM driver Revision: 3.20
    [   12.020020] usb 1-1.5: new full speed USB device using uhci_hcd and address 4
    [   12.060048] PM: Starting manual resume from disk
    [   12.179923] usb 1-1.5: configuration #1 chosen from 1 choice
    [   12.184035] usb 1-1.5: New USB device found, idVendor=0403, idProduct=6001
    [   12.184035] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=3
    [   12.184035] usb 1-1.5: SerialNumber: Reader C6C91AE
    [   12.208028] kjournald starting.  Commit interval 5 seconds
    [   12.208028] EXT3-fs: mounted filesystem with ordered data mode.
    [   12.388023] usb 1-1.6: new full speed USB device using uhci_hcd and address 5
    [   12.515319] usb 1-1.6: configuration #1 chosen from 1 choice
    [   12.520036] usb 1-1.6: New USB device found, idVendor=0403, idProduct=6001
    [   12.520036] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=3
    [   12.520036] usb 1-1.6: SerialNumber: Reader 118
    
    sobald cccam läuft und eine abokarte im reader1 steckt gehts los:

    Code:
    
    [  575.516037] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS LOW
    [  580.516038] ftdi_sio: error from flowcontrol urb
    [  585.513684] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
    [  593.516022] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [  594.515488] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [  599.516021] ftdi_sio: urb failed to clear flow control
    [  604.513060] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
    [  605.516022] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
    [  606.515463] ftdi_sio: ftdi_set_termios urb failed to set baudrate
    [  611.516041] ftdi_sio: urb failed to clear flow control
    [  616.516037] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
    [  621.513638] ftdi_sio: error from flowcontrol urb
    .............. ohne zu stopen!
    


    USB HUB getrennt vom System und wiederverbunden:

    Code:
    
    [  740.939165] usb 1-1: new full speed USB device using uhci_hcd and address 8
    [  741.084018] usb 1-1: configuration #1 chosen from 1 choice
    [  741.084018] hub 1-1:1.0: USB hub found
    [  741.084344] hub 1-1:1.0: 7 ports detected
    [  741.200021] usb 1-1: New USB device found, idVendor=2001, idProduct=f103
    [  741.200021] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [  743.828110] usb 1-1.5: new full speed USB device using uhci_hcd and address 9
    [  743.955453] usb 1-1.5: configuration #1 chosen from 1 choice
    [  743.955453] ftdi_sio 1-1.5:1.0: FTDI USB Serial Device converter detected
    [  743.955453] ftdi_sio: Detected FT232BM
    [  743.955453] usb 1-1.5: FTDI USB Serial Device converter now attached to ttyUSB0
    [  743.960067] usb 1-1.5: New USB device found, idVendor=0403, idProduct=6001
    [  743.960067] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=3
    [  743.960067] usb 1-1.5: SerialNumber: Reader C6C91AE
    [  744.164029] usb 1-1.6: new full speed USB device using uhci_hcd and address 10
    [  744.289428] usb 1-1.6: configuration #1 chosen from 1 choice
    [  744.292047] ftdi_sio 1-1.6:1.0: FTDI USB Serial Device converter detected
    [  744.292047] ftdi_sio: Detected FT232BM
    [  744.292047] usb 1-1.6: FTDI USB Serial Device converter now attached to ttyUSB1
    [  744.296071] usb 1-1.6: New USB device found, idVendor=0403, idProduct=6001
    [  744.296071] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=3
    [  744.296071] usb 1-1.6: SerialNumber: Reader 118
    
     
    #1
  2. phantom

    Nervigen User Advertisement

  3. sulo1
    Offline

    sulo1 Ist oft hier

    Registriert:
    4. Januar 2009
    Beiträge:
    185
    Zustimmungen:
    152
    Punkte für Erfolge:
    43
    Ort:
    Niederösterreic
    AW: Debian & Smargo Fehler

    Versuche es mal ohne Smartcard Clock Frequency
     
    #2
  4. massendaten
    Offline

    massendaten Spezialist

    Registriert:
    23. April 2009
    Beiträge:
    534
    Zustimmungen:
    82
    Punkte für Erfolge:
    28
    AW: Debian & Smargo Fehler


    Hi,

    Habe es ohne Clock Frequency versucht,ändert leider nichts an den Fehlern.
     
    #3
  5. GianniBlaze
    Offline

    GianniBlaze VIP

    Registriert:
    18. November 2008
    Beiträge:
    2.563
    Zustimmungen:
    1.040
    Punkte für Erfolge:
    113
    AW: Debian & Smargo Fehler

    versuche es mal damit

    apt-get remove brltty

    dann reboote mal dein system und dann muss es gehn!!!
     
    #4

Diese Seite empfehlen