1. Diese Seite verwendet Cookies. Wenn du dich weiterhin auf dieser Seite aufhältst, akzeptierst du unseren Einsatz von Cookies. Weitere Informationen

Dbox2 Phillips bootet nicht mehr

Dieses Thema im Forum "Philips" wurde erstellt von High One, 13. September 2010.

  1. High One
    Offline

    High One Newbie

    Registriert:
    8. September 2010
    Beiträge:
    3
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    Hallo,

    habe eine Dbox 2 Phillips sie ist während des Laufens abgestürzt und bootet jetzt nur noch bis LADE KERNEL.
    Diverse Images versucht wieder drauf zu bügel ohne Erfolg bleibt immer an der gleichen Stelle stehen mit LADE KERNEL.

    Hier mal ein LOG.

    Watchdog enabled
    I2C: ready
    DRAM: 32 MB
    FLASH: 8 MB
    Scanning JFFS2 FS: . done.
    find_inode failed for name=boot.conf
    load: Failed to find inode
    FB: ready
    In: serial
    Out: serial
    Err: serial
    Net: SCC ETHERNET
    LCD: ready

    Options:
    1: Console on null
    2: Console on ttyS0
    3: Console on framebuffer
    Select option (1-3), other keys to stop autoboot: 0
    ............................................................... done
    Un-Protected 63 sectors
    ### FS (squashfs) loading 'vmlinuz' to 0x200000
    ### FS load complete: 671131 bytes loaded to 0x200000
    ## Booting kernel from Legacy Image at 00200000 ...
    Image Name: Linux-2.4.37.9-dbox2
    Image Type: PowerPC Linux Kernel Image (gzip compressed)
    Data Size: 671067 Bytes = 655.3 kB
    Load Address: 00000000
    Entry Point: 00000000
    Verifying Checksum ... OK
    Uncompressing Kernel Image ... OK
    Linux version 2.4.37.9-dbox2 (petze@linux) (gcc version 3.4.6) #1 Sa 24. Jul 22:
    45:49 CEST 2010
    On node 0 totalpages: 8192
    zone(0): 8192 pages.
    zone(1): 0 pages.
    zone(2): 0 pages.
    Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600
    dbox_duplex=
    Decrementer Frequency = 247125000/60
    m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
    m8xx_wdt: keep-alive trigger installed (PITC: 0x2580)
    Console: colour dummy device 80x25
    Calibrating delay loop... 65.53 BogoMIPS
    Memory: 30824k available (1144k kernel code, 340k data, 60k init, 0k highmem)
    Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
    Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
    Mount cache hash table entries: 512 (order: 0, 4096 bytes)
    Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
    Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
    POSIX conformance testing by UNIFIX
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    Starting kswapd
    devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
    devfs: boot_options: 0x1
    JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
    squashfs: version 3.0 (2006/03/15) Phillip Lougher
    i2c-core.o: i2c core module version 2.6.1 (20010830)
    i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
    CPM UART driver version 0.04
    ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
    pty: 256 Unix98 ptys configured
    half-duplex mode enabled
    eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:2d:69:de
    loop: loaded (max 8 devices)
    D-Box 2 flash driver (size->0x800000 mem->0x10000000)
    D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
    Intel/Sharp Extended Query Table at 0x0035
    cfi_cmdset_0001: Erase suspend on write enabled
    Creating 6 MTD partitions on "D-Box 2 flash memory":
    0x00000000-0x00020000 : "BR bootloader"
    0x00020000-0x00040000 : "FLFS (U-Boot)"
    0x00040000-0x005e0000 : "root (squashfs+lzma)"
    0x005e0000-0x00800000 : "var (jffs2)"
    0x00020000-0x00800000 : "Flash without bootloader"
    0x00000000-0x00800000 : "Complete Flash"
    Linux video capture interface: v1.00
    mice: PS/2 mouse device common for all mice
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP
    IP: routing cache hash table of 512 buckets, 4Kbytes
    TCP: Hash tables configured (established 2048 bind 4096)
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    VFS: Mounted root (squashfs filesystem) readonly.
    Mounted devfs on /dev
    Freeing unused kernel memory: 60k init
    init started: BusyBox v1.14.4 (2010-07-24 23:13:17 CEST)
    starting pid 8, tty '': '/etc/init.d/sysinit'
    [BOOT] running /etc/init.d/sysinit
    Thu Jan 1 01:00:00 UTC 1970
    starting pid 22, tty '': '/etc/init.d/rcS'

    Please press Enter to activate this console. starting /etc/init.d/S05drivers ...

    [BOOT] running /etc/init.d/S05drivers
    tuxbox: no IDE-Interface detected
    Detected STB:
    Vendor: Philips
    Model: D-BOX2 (2 flash chips)
    event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
    [i2c-8xx]: mpc 8xx i2c init
    [i2c-8xx]: adapter: 0
    lcd.o: init lcd driver module
    lcd.o: found KS0713/SED153X lcd interface
    $Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
    $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
    DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
    DVB: registering frontend 0:0 (TDA8044H QPSK Demodulator)...
    dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
    $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
    avia_av: $Id: avia_av_core.c,v 1.102 2010/05/25 19:58:20 dbt Exp $
    avia_av_core: Starting avia_av_wdt thread.
    avia_av: AVIA 600L found.
    avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
    avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
    avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
    avia_gt_core: autodetecting chip type... eNX
    avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
    avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
    avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
    avia_gt_ucode: loaded ucode v0014
    avia_gt_ucode: ucode section filters disabled.
    avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
    avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
    avia_gt_gv: set_input_size (width=720, height=576)
    avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
    avia_gt_pcm_set_rate(44100)
    avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
    avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
    avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
    avia_gt_core: Loaded AViA eNX/GTX driver
    avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
    avia_gt_gv: set_input_mode (mode=2)
    avia_gt_gv: set_input_size (width=720, height=576)
    avia_gt_gv: set_input_mode (mode=2)
    avia_gt_gv: set_input_size (width=720, height=576)
    avia_gt_gv: set_input_mode (mode=2)
    avia_gt_gv: set_input_size (width=720, height=576)
    Console: switching to colour frame buffer device 82x32
    avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
    avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
    avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
    avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $
    avia_gt_pcm_set_rate(44100)
    avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
    avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
    avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
    starting /etc/init.d/S10network ...
    starting /etc/init.d/S10rtc ...
    starting /etc/init.d/S15syslogd ...
    Jan 1 02:00:10 dbox syslog.info syslogd started: BusyBox v1.14.4
    starting /etc/init.d/S17loadkeys ...
    Loading /share/keymaps/i386/qwertz/de-latin1-nodeadkeys.kmap.gz
    starting /etc/init.d/S18rdate ...
    starting /etc/init.d/S20inetd ...
    starting /etc/init.d/S25cdkVcInfo ...
    starting /etc/init.d/S30autofs ...
    [BOOT] Starting the automounter
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read fragment cache block [35043c]
    SQUASHFS error: Unable to read page, block 35043c, size 4f59
    Segmentation fault
    starting /etc/init.d/S31nfsserver ...
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read page, block 2c6e3f, size 5678
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read page, block 2c6e3f, size 5678
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read page, block 2c6e3f, size 5678
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read page, block 2c6e3f, size 5678
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read page, block 2c6e3f, size 5678
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read page, block 2c6e3f, size 5678
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read page, block 2c6e3f, size 5678
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read page, block 2c6e3f, size 5678
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read page, block 2c6e3f, size 5678
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read page, block 2c6e3f, size 5678
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read page, block 2c6e3f, size 5678
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read page, block 2c6e3f, size 5678
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read page, block 2c6e3f, size 5678
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read page, block 2c6e3f, size 5678
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read page, block 2c6e3f, size 5678
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read page, block 2c6e3f, size 5678
    insmod: not an ELF file
    Segmentation fault
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read fragment cache block [3b1af1]
    SQUASHFS error: Unable to read page, block 3b1af1, size 526d
    Segmentation fault
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read fragment cache block [37862d]
    SQUASHFS error: Unable to read page, block 37862d, size 464a
    swap_free: Bad swap file entry 00fd0000
    swap_free: Bad swap file entry 00fd0000
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read fragment cache block [37862d]
    SQUASHFS error: Unable to read page, block 37862d, size 464a
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read fragment cache block [37862d]
    SQUASHFS error: Unable to read page, block 37862d, size 464a
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read fragment cache block [37862d]
    SQUASHFS error: Unable to read page, block 37862d, size 464a
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read fragment cache block [37862d]
    SQUASHFS error: Unable to read page, block 37862d, size 464a
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read fragment cache block [37862d]
    SQUASHFS error: Unable to read page, block 37862d, size 464a
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read fragment cache block [37862d]
    SQUASHFS error: Unable to read page, block 37862d, size 464a
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read fragment cache block [37862d]
    SQUASHFS error: Unable to read page, block 37862d, size 464a
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read fragment cache block [37862d]
    SQUASHFS error: Unable to read page, block 37862d, size 464a
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read fragment cache block [37862d]
    SQUASHFS error: Unable to read page, block 37862d, size 464a
    /sbin/exportfs: line 1: : not found
    swap_free: Bad swap file entry 00fd0000
    swap_free: Bad swap file entry 00fd0000
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read fragment cache block [3b6d5e]
    SQUASHFS error: Unable to read page, block 3b6d5e, size 5ec5
    swap_free: Bad swap file entry 00fd0000
    swap_free: Bad swap file entry 00fd0000
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read fragment cache block [3b6d5e]
    SQUASHFS error: Unable to read page, block 3b6d5e, size 5ec5
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read fragment cache block [3b6d5e]
    SQUASHFS error: Unable to read page, block 3b6d5e, size 5ec5
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read fragment cache block [3b6d5e]
    SQUASHFS error: Unable to read page, block 3b6d5e, size 5ec5
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read fragment cache block [3b6d5e]
    SQUASHFS error: Unable to read page, block 3b6d5e, size 5ec5
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read fragment cache block [3b6d5e]
    SQUASHFS error: Unable to read page, block 3b6d5e, size 5ec5
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read fragment cache block [3b6d5e]
    SQUASHFS error: Unable to read page, block 3b6d5e, size 5ec5
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read fragment cache block [3b6d5e]
    SQUASHFS error: Unable to read page, block 3b6d5e, size 5ec5
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read fragment cache block [3b6d5e]
    SQUASHFS error: Unable to read page, block 3b6d5e, size 5ec5
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read fragment cache block [3b6d5e]
    SQUASHFS error: Unable to read page, block 3b6d5e, size 5ec5
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read fragment cache block [3b6d5e]
    SQUASHFS error: Unable to read page, block 3b6d5e, size 5ec5
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read fragment cache block [3b6d5e]
    SQUASHFS error: Unable to read page, block 3b6d5e, size 5ec5
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read fragment cache block [3b6d5e]
    SQUASHFS error: Unable to read page, block 3b6d5e, size 5ec5
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read fragment cache block [3b6d5e]
    SQUASHFS error: Unable to read page, block 3b6d5e, size 5ec5
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read fragment cache block [3b6d5e]
    SQUASHFS error: Unable to read page, block 3b6d5e, size 5ec5
    SQUASHFS error: lzma_fs returned unexpected result 0x1
    SQUASHFS error: Unable to read fragment cache block [3b6d5e]
    SQUASHFS error: Unable to read page, block 3b6d5e, size 5ec5
    /sbin/rpc.mountd: line 1: : not found
    swap_free: Bad swap file entry 00fd0000
    swap_free: Bad swap file entry 00fd0000
    Segmentation fault
    Segmentation fault
    Segmentation fault
    Segmentation fault
    Segmentation fault
    Segmentation fault
    Segmentation fault
    Segmentation fault

    kann mir evetuell einer weiterhelfen?

    Oder ist die Kiste jetzt einfach Schrott

    Danke

    High one
     
    #1
  2. phantom

    Nervigen User Advertisement

  3. marcus.past
    Offline

    marcus.past VIP

    Registriert:
    3. August 2009
    Beiträge:
    2.284
    Zustimmungen:
    487
    Punkte für Erfolge:
    0
    AW: Dbox2 Phillips bootet nicht mehr

    sieht sehr nach nem Fehler im flash selber aus - haste mal nen log vom flashen der Box?
    dort sollte zu sehen sein, ob alle Sektoren erfolgreich geschrieben werden können

    aber so wie`s schon mit nem inode-Fehler bei en oben geposteten losgeht, würd ich eher auf nen Totalschaden tippen - zumindest wirtschaftlich :)
     
    #2
  4. High One
    Offline

    High One Newbie

    Registriert:
    8. September 2010
    Beiträge:
    3
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    AW: Dbox2 Phillips bootet nicht mehr

    Hallo marcus.past

    Danke für die Antwort, habe die Box in die Ecke geworfen,habe echt keine Lust mehr,irgendwann dreht man sich nur noch im Kreis.


    MfG

    High One
     
    #3
  5. sandrossss
    Offline

    sandrossss Spezialist

    Registriert:
    10. Mai 2008
    Beiträge:
    512
    Zustimmungen:
    47
    Punkte für Erfolge:
    28
    Beruf:
    Rente
    Ort:
    irgentwo
    AW: Dbox2 Phillips bootet nicht mehr

    Werf sie zu mir. Brauch ersatzteile.
     
    #4
  6. sandrossss
    Offline

    sandrossss Spezialist

    Registriert:
    10. Mai 2008
    Beiträge:
    512
    Zustimmungen:
    47
    Punkte für Erfolge:
    28
    Beruf:
    Rente
    Ort:
    irgentwo
    AW: Dbox2 Phillips bootet nicht mehr

    Was ist jetzt! Hast du deine P.N. nachgeschaut.
     
    #5
  7. marcus.past
    Offline

    marcus.past VIP

    Registriert:
    3. August 2009
    Beiträge:
    2.284
    Zustimmungen:
    487
    Punkte für Erfolge:
    0
    AW: Dbox2 Phillips bootet nicht mehr

    gute idee - mancher kann z.B. nen tuner noch gut gebrauchen :)

    gib High One ein bissel Zeit, nicht jeder schaut jeden Tag ins Forum
     
    #6
  8. sandrossss
    Offline

    sandrossss Spezialist

    Registriert:
    10. Mai 2008
    Beiträge:
    512
    Zustimmungen:
    47
    Punkte für Erfolge:
    28
    Beruf:
    Rente
    Ort:
    irgentwo
    AW: Dbox2 Phillips bootet nicht mehr

    Hatte ihn schon P.N geschickt.
    Wer das schon liest,suche immer noch Display-Platine.
     
    #7
  9. High One
    Offline

    High One Newbie

    Registriert:
    8. September 2010
    Beiträge:
    3
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    AW: Dbox2 Phillips bootet nicht mehr

    Hallo,

    konnte jetzt erst schreiben,Box habe ich schon entsorgt!
    Sorry

    Mfg


    High One
     
    #8
  10. nobby
    Offline

    nobby Ist gelegentlich hier

    Registriert:
    3. Mai 2008
    Beiträge:
    52
    Zustimmungen:
    2
    Punkte für Erfolge:
    8
    AW: Dbox2 Phillips bootet nicht mehr

    "Schade" hättest mal einen Speichertest gemacht, warscheinlich nur ein oder beide DRam`s defekt.
     
    #9

Diese Seite empfehlen