Digital Eliteboard - Das Digitale Technik Forum

Registriere dich noch heute kostenloses um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereiche, welche für Gäste verwehrt bleiben

Dbox2 Nokia defekt?

AW: Dbox2 Nokia defekt?

wie kann ich den boot log auslesen bitte um kurze erklärung. Overlooking habe
ich nichts verändert weis auch nicht wie das geht.
grüße
 
AW: Dbox2 Nokia defekt?

Vermute ja auch das es der Avia Chip ist der den fehler aus gibt aber nen defeckt schließe ich aus, denke eher nen Debug fehler das nen Doppel treiber geladen wird denn beim übergang in den standby ist das bild klar
am Bootlog sieht mann dann wo der fehler liegt.

Bootlog erstellen
Allgemeines

Das Bootlog (serielles Log) wird benötigt, um z.B. den Startvorgang der DBox2-Software analysieren zu können.
Um das Bootlog zu bekommen, benötigt man Folgendes:
  • Terminal-Programm (z.B. Hyperterminal) oder DBox2-Bootmanager
  • Null-Modemkabel

Führt nun folgende Schritte aus
  • Nullmodemkabel mit DBox2 und PC (Com1 od. Com2) verbinden
  • Schnittstelle am PC entsprechend konfigurieren. Stellt die benutzte COM-Schnittstelle auf 9600 Baud, 8bit, no parity, Stoppbits "1", Flusssteuerung "keine"
  • DBox2 starten und gucken, ob eine Ausgabe im Terminalprogramm erfolgt. Wenn nein (oder nur unleserliche Zeichen), Schnittstelle auf 57600 Baud, 8 bit, no parity konfigurieren und DBox2 wieder neu booten.

Im Terminal-Programm sollten eine lange Liste der von der DBox2 durchgeführten Aktionen stehen. Dies ist das Bootlog...


Beispiel (extrem gekürzt):
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.2 mID 01 debug: feID dd gtxID 0b debug: fpID 5a dsID 01-8b[....] debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) ......... usw Hoffe konnte dir erstma helfen. LG der BlueXp

 
AW: Dbox2 Nokia defekt?

werde es probieren wie es in der anleitung steht falls es klappt setzte ich
den bootlog hier rein.
grüße:JC_hmmm::JC_hmmm:
 
AW: Dbox2 Nokia defekt?

Hier mein bootlog falls mir jemand weiter helfen kann.

ebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID ff-ff.ff.ff.ff.ff.ff-ff
debug: HWrev X3 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os
debug: Got Block #0032
will verify ELF image, start= 0x800000, size= 154360
verify sig: 262
Branching to 0x40000

U-Boot 1.2.0 (Tuxbox) (Feb 28 2009 - 19:17:27)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .......... done.
env: found "console" with value ttyS0
env: found "lcd_inverse" with value 0
env: found "lcd_contrast" with value 15
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (jffs2) loading 'vmlinuz' to 0x100000
### FS load complete: 670497 bytes loaded to 0x100000
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 670433 Bytes = 654.7 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.37-dbox2 (Gandharva@tron) (gcc version 3.4.6) #1 Sa 28. Feb 19
:34:31 CET 2009
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,9600 dbox_duplex= root=/dev/mtdblock2 rw root
fstype=jffs2
Decrementer Frequency =
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30824k available (1140k kernel code, 344k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module versi
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1f:4c:51
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 5 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x00800000 : "root (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.7.2 (2009-02-28 19:25:50 CET)
mount: using /etc/fstab
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
tuxbox: no IDE-Interface detected
Detected STB:
Vendor: Nokia
Model: D-BOX2 (2 flash chips)
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
insmod: warning: kernel-module version mismatch
/lib/modules/2.4.37-dbox2/misc/ves1820.o was compiled for kernel version
2.4.34-dbox2
while this kernel is version 2.4.37-dbox2
insmod: ves1x93.o: no module by that name found
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C ad
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: microcode verify: 6 errors.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
avia_gt_proc: Using config file '/var/tuxbox/config/avia.conf'.

avia_gt_proc: $Id: avia_gt_proc.c,v 0.92d 2003/06/18 19:00:00 bofh Exp $
avia_gt_proc: found - AVIA GTX
 
AW: Dbox2 Nokia defekt?

avia_av: microcode verify: 6 errors.

Der Avia 500 selber, oder einer (mehrere) dessen Ram`s defekt. Überwiegend ist aber nur ein RAM defekt, das sind bei mir ck. 80% der Fälle.
 
AW: Dbox2 Nokia defekt?

Danke, also ist nichts zu machen ausser austauschen aber das lohn sich nicht.
LG
 
AW: Dbox2 Nokia defekt?

Ich kann mal den log einstellen wenn die box per FB zum neu starten aufgefordert wird
weil da ist das bild wieder Ok. nach den neu booten kommen die rechtecke auf den bild wieder.

error while loading icon: /share/tuxbox/neutrino/icons/shutdown.raw (NAND) (C) 2001-2003 Red
rdate: timeout connecting to time servera
error while loading palette: /share/tuxbox/neutrino/icons/shutdown.palction timed out/enigma was not found, entry Enigma discarded.
rdate: t
emu_stops: Shutdown Emue server0)0b
/var/plugins/emu_handling: emu_handlingtUTC: read: Connection timed outer modu
ACTION: stop (20010830)
[se
EMU: .cccam timeout conne
FLEX:time ser
/var/plugins/emu_handling: stop cccamon 0.
[sectionsd] getUTC: read: Conne
killall: cannot kill pid 199: No such process was not found,
rdate: timeout connecting to
killall: cannot kill pid 209: No such processliz
d

u
pty: 256 Unix98
[lcdmenu] Only one
/var/plugins/emu_handling: stop capmtserverenabled
debug: G
e
[Usercont
zapit shot down IMG Removed by PPCBoot - fixed
Waiting for zapit (max. 9 seconds)

Flash-FS bootstrap loader (v1.5
[Usercontroll] usercontroll by PPCBoot - fixed b superblo


WATCHDOG reset enabled/plugins/emu_handling:
dbox2:root> debug:.0lk=1me server
BOOTP/TFTP bootstrap loader (v0.3)ng unhandled irq reg 0 bit 7ntrold
debugIMG Removed : rou
debug: Transmitting BOOTP request via broadcast
rdate
[contr
EMU: .cccam3(LB)e server
F
debug: Given up BOOTP/TFTP bootndling: start capmtserver6).2.0
boot net failedut

Flash-FS bootstrap loader (v1.5)config/zapit/myservices.xml fou

Found Flash-FS superblock version 3.1/share/fonts/micron
VFS:
[getservice
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FSunted devfs on
[getservices] dup transponder id 3 onid 85r
debug: Got Block #0032ld)
[sectionsd] g
[ge

will verify ELF image, start= 0x800000, size= 154360 19:25:50 CET)font /share/f
[getservices] dup transp
verify sig: 26285ount: using /
Branching to 0x40000sections
[getservice


U-Boot 1.2.0 (Tuxbox) (Feb 28 2009 - 19:17:27)..
r
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (jffs2) loading 'vmlinuz' to 0x100000
### FS load complete: 670497 bytes loaded to 0x100000
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 670433 Bytes = 654.7 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.37-dbox2
 
AW: Dbox2 Nokia defekt?

In deinem Fall, würde sich die Reparatur noch lohnen. Ein RAM wechseln kostet ck.10 Euro. Google mal nach Bastian Rehberg, Berlin.
 
AW: Dbox2 Nokia defekt?

Hi, für den Preis ja, aber leider bin ich schon vor ca. 1 Jahr abgezockt worden da war die Box bei einen der bei ebay inseriert hatte und isch habe die box zum tuner wechsel dahin geschickt bei der überprüfung sagte er mir das ein Grapfik chip defekt wäre und die Reperatur würde 60Euro kosten die ich damals auch bezahlt habe. Als ich die box öffnete sah ich aber kein neuen chip, aber die box lief wieder.Jetzt wieder ein Problem.
Kannst du mir sagen ob der Bastian seriös ist und wirklisch nur den Ram Tauscht?? der bei Ebay wars nicht, das ist immer so eine sache.
:JC_hmmm::JC_hmmm::JC_hmmm:
 
AW: Dbox2 Nokia defekt?

Versuchs selbst..

Ich weiß nicht ob ich hier links posten darf aber such mal nach dem Wiki von TuxBox da ist so ziemlich alles erklärt was man Hardwareseitig mit der DB2 machen kann :ja
 
AW: Dbox2 Nokia defekt?

Was soll ich selbst versuchen??
Das Ram erneuern? kann ich nicht.
Gruß
 
Zurück
Oben