1. Diese Seite verwendet Cookies. Wenn du dich weiterhin auf dieser Seite aufhältst, akzeptierst du unseren Einsatz von Cookies. Weitere Informationen

Talk CS mit 7270v2 easymouse 2 und freetz-devel-9338M

Dieses Thema im Forum "Fritzbox Talk" wurde erstellt von hausener, 31. Oktober 2012.

  1. hausener
    Offline

    hausener Newbie

    Registriert:
    18. Oktober 2012
    Beiträge:
    2
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    Hallo,
    bin absoluter Anfänger was Freetz angeht
    Hab schon so einiges gelesen aber nun gehts nicht mehr weiter;-((

    Also als Hardware habe ich eine Fritz 7270 v2 hinter einer Fritz 7270 v2 auf der hinteren(2ten) ist das Freetz
    freetz-devel-9338M geflasht und es läuft. Auf der ersten DSL und Telefon!

    Dann habe ich an der Fritz2 den König USB HUB mit ner Easymouse 2 und ner V13
    Es hängt nun an der Config OScam (OSCAM-CARDSERVER VERSION: v1.20-unstable_svn build #6593 (mips-unknown-unknown)
    wie ist die zu bearbeiten das erstmal die Karte gelesen wird?
    Die Easymouse2 steht auf 357 auf y1 auf smartmouse und 3v
    Wenn ich das Oscam starte fangen die dioden des readers an zu blinken .Mein Sys log sieht so aus:
    kern.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    Oct 31 16:41:19 cardserver kern.warn kernel: [1102953][0]system-load 7 82 tasks:9 % curr:external_servic(0 %) max:ctlmgr(5 %, pid:997), readytorun: 1, pgfault 2958/s (max 1 avg 1.0)
    Oct 31 16:41:30 cardserver kern.warn kernel: [1104018][0]system-load 1 77 tasks:10 % curr:luacgi(9 %) max:luacgi(9 %, pid:30256), readytorun: 2, pgfault 231/s (max 1 avg 1.0)
    Oct 31 16:41:42 cardserver kern.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200
    Oct 31 16:41:43 cardserver kern.info kernel: /proc/tffs: info request: success
    Oct 31 16:41:54 cardserver kern.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    Oct 31 16:41:55 cardserver kern.warn kernel: [1106504][0]system-load 2 76 tasks:9 % curr:luacgi(3 %) max:ctlmgr(4 %, pid:997), readytorun: 1, pgfault 546/s (max 1 avg 1.0)
    Oct 31 16:41:59 cardserver kern.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200
    Oct 31 16:42:01 cardserver kern.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200
    Oct 31 16:42:10 cardserver kern.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    Oct 31 16:42:20 cardserver kern.warn kernel: [1108999][0]system-load 2 76 tasks:9 % curr:luacgi(3 %) max:ctlmgr(4 %, pid:997), readytorun: 1, pgfault 57/s (max 1 avg 1.0)
    Oct 31 16:42:45 cardserver kern.warn kernel: [1111508][0]system-load 2 76 tasks:9 % curr:luacgi(3 %) max:ctlmgr(4 %, pid:997), readytorun: 1, pgfault 55/s (max 1 avg 1.0)
    Oct 31 16:43:10 cardserver kern.warn kernel: [1113996][0]system-load 2 76 tasks:9 % curr:luacgi(3 %) max:ctlmgr(4 %, pid:997), readytorun: 1, pgfault 58/s (max 1 avg 1.0)
    Oct 31 16:43:14 cardserver kern.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    Oct 31 16:43:35 cardserver kern.warn kernel: [1116485][0]system-load 2 76 tasks:9 % curr:luacgi(3 %) max:ctlmgr(4 %, pid:997), readytorun: 1, pgfault 58/s (max 1 avg 1.0)
    Oct 31 16:43:48 cardserver daemon.info hostapd: ath0: STA 90:94:e4:00:f2:54 WPA: group key handshake completed (WPA)
    Oct 31 16:43:48 cardserver daemon.info hostapd: ath0: STA 00:80:92:7d:2f:1e WPA: group key handshake completed (RSN)
    Oct 31 16:43:48 cardserver daemon.info hostapd: ath0: STA 34:51:c9:e4:5f:0d WPA: group key handshake completed (RSN)
    Oct 31 16:43:52 cardserver kern.warn kernel: [1118258][0]system-load 2 84 tasks:9 % curr:busybox(0 %) max:ctlmgr(5 %, pid:997), readytorun: 1, pgfault 545/s (max 1 avg 1.0)
    Oct 31 16:43:53 cardserver kern.info kernel: ramzswap: Invalid ioctl 21297
    Oct 31 16:44:03 cardserver kern.warn kernel: [1119274][0]system-load 5 82 tasks:36 % curr:luacgi(24 %) max:luacgi(24 %, pid:30804), readytorun: 2, pgfault 2628/s (max 1 avg 1.0)
    Oct 31 16:44:26 cardserver kern.warn kernel: [1121625][0]system-load 2 76 tasks:7 % curr:luacgi(4 %) max:luacgi(4 %, pid:31101), readytorun: 3, pgfault 844/s (max 1 avg 1.0)
    Oct 31 16:44:27 cardserver kern.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    Oct 31 16:44:52 cardserver kern.warn kernel: [1124180][0]system-load 5 76 tasks:8 % curr:luacgi(3 %) max:ctlmgr(4 %, pid:997), readytorun: 1, pgfault 774/s (max 1 avg 1.0)
    Oct 31 16:45:15 cardserver kern.warn kernel: [1126523][0]system-load 2 79 tasks:7 % curr:modsave(0 %) max:ctlmgr(4 %, pid:997), readytorun: 1, pgfault 340/s (max 1 avg 1.0)
    Oct 31 16:45:17 cardserver kern.info kernel: ramzswap: Invalid ioctl 21297
    Oct 31 16:45:43 cardserver kern.warn kernel: [1129284][0]system-load 6 76 tasks:8 % curr:luacgi(3 %) max:ctlmgr(3 %, pid:997), readytorun: 1, pgfault 1454/s (max 1 avg 1.0)
    Oct 31 16:46:04 cardserver kern.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    Oct 31 16:46:04 cardserver kern.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    Oct 31 16:46:05 cardserver kern.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    Oct 31 16:46:05 cardserver kern.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    Oct 31 16:46:06 cardserver kern.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200
    Oct 31 16:46:06 cardserver kern.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    Oct 31 16:46:07 cardserver kern.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    Oct 31 16:46:07 cardserver kern.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200
    Oct 31 16:46:08 cardserver kern.warn kernel: [1131783][0]system-load 2 76 tasks:9 % curr:luacgi(4 %) max:luacgi(4 %, pid:31892), readytorun: 1, pgfault 58/s (max 1 avg 1.0)
    Oct 31 16:46:08 cardserver kern.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    Oct 31 16:46:09 cardserver kern.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    Oct 31 16:46:09 cardserver kern.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    Oct 31 16:46:19 cardserver kern.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200
    Oct 31 16:46:23 cardserver kern.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    Oct 31 16:46:31 cardserver kern.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    Oct 31 16:46:31 cardserver kern.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200
    Oct 31 16:46:33 cardserver kern.warn kernel: [1134274][0]system-load 2 76 tasks:9 % curr:luacgi(3 %) max:ctlmgr(4 %, pid:997), readytorun: 1, pgfault 56/s (max 1 avg 1.0)
    Oct 31 16:46:37 cardserver kern.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    Oct 31 16:46:41 cardserver kern.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200
    Oct 31 16:46:57 cardserver kern.warn kernel: [1136758][0]system-load 2 76 tasks:10 % curr:luacgi(3 %) max:ctlmgr(5 %, pid:997), readytorun: 1, pgfault 58/s (max 1 avg 1.0)
    Oct 31 16:47:14 cardserver kern.info kernel: usb 1-1.4: USB disconnect, address 5
    Oct 31 16:47:14 cardserver kern.info kernel: ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
    Oct 31 16:47:14 cardserver kern.info kernel: ftdi_sio 1-1.4:1.0: device disconnected
    Oct 31 16:47:22 cardserver kern.warn kernel: [1139251][0]system-load 2 76 tasks:9 % curr:luacgi(3 %) max:ctlmgr(4 %, pid:997), readytorun: 1, pgfault 171/s (max 1 avg 1.0)
    Oct 31 16:47:47 cardserver kern.warn kernel: [1141675][0]system-load 2 76 tasks:8 % curr:luacgi(3 %) max:ctlmgr(4 %, pid:997), readytorun: 1, pgfault 56/s (max 1 avg 1.0)
    Oct 31 16:48:11 cardserver kern.warn kernel: [1144101][0]system-load 2 76 tasks:8 % curr:luacgi(4 %) max:luacgi(4 %, pid:31999), readytorun: 2, pgfault 57/s (max 1 avg 1.0)
    Oct 31 16:48:35 cardserver kern.warn kernel: [1146529][0]system-load 2 76 tasks:8 % curr:ctlmgr(4 %) max:ctlmgr(4 %, pid:997), readytorun: 2, pgfault 56/s (max 1 avg 1.0)
    Oct 31 16:48:59 cardserver kern.warn kernel: [1148957][0]system-load 2 76 tasks:8 % curr:luacgi(4 %) max:luacgi(4 %, pid:32003), readytorun: 1, pgfault 56/s (max 1 avg 1.0)
    Oct 31 16:49:24 cardserver kern.warn kernel: [1151386][0]system-load 2 76 tasks:8 % curr:ctlmgr(4 %) max:ctlmgr(4 %, pid:997), readytorun: 3, pgfault 57/s (max 1 avg 1.0)
    Oct 31 16:49:48 cardserver kern.warn kernel: [1153822][0]system-load 2 76 tasks:8 % curr:luacgi(4 %) max:ctlmgr(4 %, pid:997), readytorun: 1, pgfault 57/s (max 1 avg 1.0)
    Oct 31 16:50:01 cardserver cron.info crond[3315]: crond: USER root pid 32009 cmd /var/media/ftp/uStore01/external_folder/service/bin/watchdog.sh c_ci
    Oct 31 16:50:01 cardserver cron.info crond[3315]: crond: USER root pid 32010 cmd /var/media/ftp/uStore01/external_folder/service/bin/watchdog.sh c_cr
    Oct 31 16:50:12 cardserver kern.warn kernel: [1156254][0]system-load 2 76 tasks:8 % curr:luacgi(4 %) max:luacgi(4 %, pid:32019), readytorun: 1, pgfault 102/s (max 1 avg 1.0)
    Oct 31 16:50:37 cardserver kern.warn kernel: [1158682][0]system-load 2 76 tasks:9 % curr:luacgi(3 %) max:ctlmgr(4 %, pid:997), readytorun: 1, pgfault 57/s (max 1 avg 1.0)
    Oct 31 16:51:01 cardserver kern.warn kernel: [1161104][0]system-load 2 76 tasks:8 % curr:ctlmgr(3 %) max:luacgi(4 %, pid:32023), readytorun: 2, pgfault 57/s (max 1 avg 1.0)
    Oct 31 16:51:25 cardserver kern.warn kernel: [1163530][0]system-load 2 76 tasks:8 % curr:luacgi(3 %) max:ctlmgr(3 %, pid:997), readytorun: 1, pgfault 56/s (max 1 avg 1.0)
    Oct 31 16:51:48 cardserver kern.warn kernel: [1165771][0]system-load 2 79 tasks:6 % curr:external_servic(0 %) max:ctlmgr(4 %, pid:997), readytorun: 1, pgfault 481/s (max 1 avg 1.0)
    Oct 31 16:52:10 cardserver kern.warn kernel: [1168038][0]system-load 3 82 tasks:5 % curr:eek:verview.cgi(0 %) max:ctlmgr(3 %, pid:997), readytorun: 2, pgfault 1455/s (max 1 avg 1.0)
    Oct 31 16:52:11 cardserver kern.info kernel: ramzswap: Invalid ioctl 21297
    Oct 31 16:52:20 cardserver kern.info kernel: usbcore: deregistering interface driver ftdi_sio
    Oct 31 16:52:20 cardserver kern.info kernel: USB Serial deregistering driver FTDI USB Serial Device
    Oct 31 16:52:20 cardserver kern.info kernel: usbcore: deregistering interface driver pl2303
    Oct 31 16:52:20 cardserver kern.info kernel: USB Serial deregistering driver pl2303
    Oct 31 16:52:20 cardserver kern.info kernel: usbcore: deregistering interface driver usbserial_generic
    Oct 31 16:52:20 cardserver kern.info kernel: USB Serial deregistering driver generic
    Oct 31 16:52:20 cardserver kern.info kernel: usbcore: deregistering interface driver usbserial
    Oct 31 16:52:22 cardserver kern.debug kernel: __io_remap_setwriteprotect: info: no pte for addr 95ea0000
    Oct 31 16:52:22 cardserver kern.info kernel: usbcore: registered new interface driver usbserial
    Oct 31 16:52:22 cardserver kern.info kernel: USB Serial support registered for generic
    Oct 31 16:52:22 cardserver kern.info kernel: usbcore: registered new interface driver usbserial_generic
    Oct 31 16:52:22 cardserver kern.info kernel: usbserial: USB Serial Driver core
    Oct 31 16:52:22 cardserver kern.debug kernel: __io_remap_setwriteprotect: info: no pte for addr 94f50000
    Oct 31 16:52:22 cardserver kern.info kernel: USB Serial support registered for FTDI USB Serial Device
    Oct 31 16:52:22 cardserver kern.info kernel: usbcore: registered new interface driver ftdi_sio
    Oct 31 16:52:22 cardserver kern.info kernel: ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
    Oct 31 16:52:23 cardserver kern.debug kernel: __io_remap_setwriteprotect: info: no pte for addr 94f5c000
    Oct 31 16:52:23 cardserver kern.info kernel: USB Serial support registered for pl2303
    Oct 31 16:52:23 cardserver kern.info kernel: usbcore: registered new interface driver pl2303
    Oct 31 16:52:23 cardserver kern.info kernel: pl2303: Prolific PL2303 USB to serial adaptor driver
    Oct 31 16:52:34 cardserver kern.info kernel: usb 1-1.4: new full speed USB device using musb_hdrc and address 6
    Oct 31 16:52:34 cardserver kern.info kernel: usb 1-1.4: New USB device found, idVendor=0403, idProduct=6001
    Oct 31 16:52:34 cardserver kern.info kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    Oct 31 16:52:34 cardserver kern.info kernel: usb 1-1.4: Product: FT232R USB UART
    Oct 31 16:52:34 cardserver kern.info kernel: usb 1-1.4: Manufacturer: FTDI
    Oct 31 16:52:34 cardserver kern.info kernel: usb 1-1.4: SerialNumber: A400ZGFQ
    Oct 31 16:52:34 cardserver kern.info kernel: usb 1-1.4: configuration #1 chosen from 1 choice
    Oct 31 16:52:34 cardserver kern.info kernel: ftdi_sio 1-1.4:1.0: FTDI USB Serial Device converter detected
    Oct 31 16:52:34 cardserver kern.info kernel: usb 1-1.4: Detected FT232RL
    Oct 31 16:52:34 cardserver kern.info kernel: usb 1-1.4: Number of endpoints 2
    Oct 31 16:52:34 cardserver kern.info kernel: usb 1-1.4: Endpoint 1 MaxPacketSize 64
    Oct 31 16:52:34 cardserver kern.info kernel: usb 1-1.4: Endpoint 2 MaxPacketSize 64
    Oct 31 16:52:34 cardserver kern.info kernel: usb 1-1.4: Setting MaxPacketSize 64
    Oct 31 16:52:34 cardserver kern.info kernel: usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB0
    Oct 31 16:52:40 cardserver kern.warn kernel: [1171031][0]system-load 6 77 tasks:8 % curr:luacgi(3 %) max:ctlmgr(3 %, pid:997), readytorun: 1, pgfault 2063/s (max 1 avg 1.0)
    Oct 31 16:52:43 cardserver kern.info kernel: usbcore: deregistering interface driver ftdi_sio
    Oct 31 16:52:43 cardserver kern.info kernel: ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
    Oct 31 16:52:43 cardserver kern.info kernel: ftdi_sio 1-1.4:1.0: device disconnected
    Oct 31 16:52:43 cardserver kern.info kernel: USB Serial deregistering driver FTDI USB Serial Device
    Oct 31 16:52:43 cardserver kern.info kernel: usbcore: deregistering interface driver pl2303
    Oct 31 16:52:43 cardserver kern.info kernel: USB Serial deregistering driver pl2303
    Oct 31 16:52:44 cardserver kern.info kernel: usbcore: deregistering interface driver usbserial_generic
    Oct 31 16:52:44 cardserver kern.info kernel: USB Serial deregistering driver generic
    Oct 31 16:52:44 cardserver kern.info kernel: usbcore: deregistering interface driver usbserial
    Oct 31 16:52:45 cardserver kern.debug kernel: __io_remap_setwriteprotect: info: no pte for addr 95ea0000
    Oct 31 16:52:45 cardserver kern.info kernel: usbcore: registered new interface driver usbserial
    Oct 31 16:52:45 cardserver kern.info kernel: USB Serial support registered for generic
    Oct 31 16:52:45 cardserver kern.info kernel: usbcore: registered new interface driver usbserial_generic
    Oct 31 16:52:45 cardserver kern.info kernel: usbserial: USB Serial Driver core
    Oct 31 16:52:45 cardserver kern.debug kernel: __io_remap_setwriteprotect: info: no pte for addr 94e20000
    Oct 31 16:52:45 cardserver kern.info kernel: USB Serial support registered for FTDI USB Serial Device
    Oct 31 16:52:45 cardserver kern.info kernel: ftdi_sio 1-1.4:1.0: FTDI USB Serial Device converter detected
    Oct 31 16:52:45 cardserver kern.info kernel: usb 1-1.4: Detected FT232RL
    Oct 31 16:52:45 cardserver kern.info kernel: usb 1-1.4: Number of endpoints 2
    Oct 31 16:52:45 cardserver kern.info kernel: usb 1-1.4: Endpoint 1 MaxPacketSize 64
    Oct 31 16:52:45 cardserver kern.info kernel: usb 1-1.4: Endpoint 2 MaxPacketSize 64
    Oct 31 16:52:45 cardserver kern.info kernel: usb 1-1.4: Setting MaxPacketSize 64
    Oct 31 16:52:45 cardserver kern.info kernel: usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB0
    Oct 31 16:52:45 cardserver kern.info kernel: usbcore: registered new interface driver ftdi_sio
    Oct 31 16:52:45 cardserver kern.info kernel: ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
    Oct 31 16:52:46 cardserver kern.debug kernel: __io_remap_setwriteprotect: info: no pte for addr 94f5c000
    Oct 31 16:52:46 cardserver kern.info kernel: USB Serial support registered for pl2303
    Oct 31 16:52:46 cardserver kern.info kernel: usbcore: registered new interface driver pl2303
    Oct 31 16:52:46 cardserver kern.info kernel: pl2303: Prolific PL2303 USB to serial adaptor driver
    Oct 31 16:52:54 cardserver kern.warn kernel: [1172402][0]system-load 3 82 tasks:12 % curr:external_servic(0 %) max:ctlmgr(6 %, pid:997), readytorun: 2, pgfault 1922/s (max 1 avg 1.0)Oct 31 16:52:57 cardserver kern.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200
    Oct 31 16:53:03 cardserver kern.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200
    Oct 31 16:53:05 cardserver kern.warn kernel: [1173471][0]system-load 1 77 tasks:10 % curr:luacgi(8 %) max:luacgi(8 %, pid:927), readytorun: 2, pgfault 242/s (max 1 avg 1.0)
    Oct 31 16:53:19 cardserver kern.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    Oct 31 16:53:23 cardserver kern.info kernel: /proc/tffs: info request: success

    die Config oscam server
    Readereinstellungen fuer ein V13
    [reader]
    label = sky
    enable = 1
    protocol = mouse
    device = /dev/ttyUSB0
    device_out_endpoint = 0x82
    services = skywelt,skyweltextra,skyfilm,skyhd,skyppv,skysport
    smargopatch = 1
    caid = 09C4
    boxid = 12345678
    ecmwhitelist = 46,90
    detect = cd
    mhz = 357
    cardmhz = 357
    ident = 09C4:000000
    group = 4
    emmcache = 1,2,3
    blockemm-unknown = 1
    auprovid = 000001
    oscam.conf
    Global

    [global]
    logfile = /var/media/ftp/uStore01/logs/oscam.log
    disablelog = 0
    disableuserfile = 0
    usrfileflag = 0
    clienttimeout = 5000
    fallbacktimeout = 2500
    clientmaxidle = 120
    cachedelay = 120
    bindwait = 120
    netprio = 0
    clientdyndns = 0
    resolvedelay = 30
    unlockparental = 0
    nice = -1
    serialreadertimeout = 1500
    maxlogsize = 521
    waitforcards = 1
    preferlocalcards = 1
    saveinithistory = 1
    readerrestartseconds = 5
    readerautoloadbalance = 0
    readerautoloadbalance/save = 0
    [monitor]
    port = 988
    nocrypt = 192.168.0.0-192.168.255.255
    aulow = 120
    hideclient/to = 30
    monlevel = 1
    appendchaninfo = 0
    #[newcamd]
    #port = 34001@1830:003411
    #key = 0102030405060708091011121314
    #allowed = 0.0.0.0-255.255.255.255
    #keepalive = 0
    #mgclient = 0
    [cccam]
    port = 34000
    reshare = 2
    version = 2.2.1
    updateinterval = 0
    [webif]
    httpport = 83
    httpcss = /var/media/ftp/uStor01/service/oscam/style.css
    httprefresh = 10
    httpallowed = 192.168.0.0-192.168.255.255
    httphideidleclients = 1
    httpreadonly = 0
    Hat jemand ne Idee?
     
    Zuletzt von einem Moderator bearbeitet: 31. Oktober 2012
    #1
  2. phantom

    Nervigen User Advertisement

  3. bodo27378
    Offline

    bodo27378 Elite Lord Supporter

    Registriert:
    26. Juni 2011
    Beiträge:
    4.271
    Zustimmungen:
    3.401
    Punkte für Erfolge:
    113
    AW: CS mit 7270v2 easymouse 2 und freetz-devel-9338M

    Du hast eine PN
     
    #2
  4. hausener
    Offline

    hausener Newbie

    Registriert:
    18. Oktober 2012
    Beiträge:
    2
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    AW: CS mit 7270v2 easymouse 2 und freetz-devel-9338M

    Danke erstmal , werd's gleich morgen testen , meld mich !
    :))
     
    #3
  5. bombadil
    Offline

    bombadil MFC Digital Eliteboard Team

    Registriert:
    2. Oktober 2008
    Beiträge:
    11.816
    Zustimmungen:
    9.118
    Punkte für Erfolge:
    113
    Beruf:
    Kaufmann
    Ort:
    Mittelerde
    AW: CS mit 7270v2 easymouse 2 und freetz-devel-9338M

    Hi,

    raute mal die ecmwhitelist aus

    Code:
     #ecmwhitelist = 46,90
    oder so

    Code:
     ecmwhitelist = A0,B3,46,51,58,63,69,90,95,9B
    Lieben Gruß
    Bombadil
     
    #4

Diese Seite empfehlen