Digital Eliteboard - Das Digitale Technik Forum
Registriere dich noch heute kostenloses um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereiche, welche für Gäste verwehrt bleiben
CCam und UM I02
- Ersteller juventino3
- Erstellt am
- ccam
juventino3
Ist oft hier
- Registriert
- 11. April 2009
- Beiträge
- 100
- Reaktionspunkte
- 1
- Punkte
- 18
AW: CCam und UM I02
wo soll ich das machen
wo soll ich das machen
juventino3
Ist oft hier
- Registriert
- 11. April 2009
- Beiträge
- 100
- Reaktionspunkte
- 1
- Punkte
- 18
AW: CCam und UM I02
verbindung konnte nicht gefunden werden
verbindung konnte nicht gefunden werden
juventino3
Ist oft hier
- Registriert
- 11. April 2009
- Beiträge
- 100
- Reaktionspunkte
- 1
- Punkte
- 18
ich weis nicht wie ich den log kopieren kann geht irgendwie nicht
Habe es als anhang gemacht
Habe es als anhang gemacht
Zuletzt bearbeitet von einem Moderator:
AW: CCam und UM I02
Klicke auf den Rand mit der rechten Maus Taste, dann auf markieren, dann gehst du in das Feld und markierst das was du rein stellen willst, danach wieder mit der rechten Maus Taste auf den Rand klicken und kopieren auswählen.
Kein Anhang zu sehen!
Klicke auf den Rand mit der rechten Maus Taste, dann auf markieren, dann gehst du in das Feld und markierst das was du rein stellen willst, danach wieder mit der rechten Maus Taste auf den Rand klicken und kopieren auswählen.
Kein Anhang zu sehen!
juventino3
Ist oft hier
- Registriert
- 11. April 2009
- Beiträge
- 100
- Reaktionspunkte
- 1
- Punkte
- 18
AW: CCam und UM I02
Sorry es geht nicht bin wohl zu blöd dafür jedes mal wenn ich nach den markieren wieder rechtsdrücke wird es wieder normal:wacko1:
Sorry es geht nicht bin wohl zu blöd dafür jedes mal wenn ich nach den markieren wieder rechtsdrücke wird es wieder normal:wacko1:
juventino3
Ist oft hier
- Registriert
- 11. April 2009
- Beiträge
- 100
- Reaktionspunkte
- 1
- Punkte
- 18
AW: CCam und UM I02
hier der anhang
hier der anhang
juventino3
Ist oft hier
- Registriert
- 11. April 2009
- Beiträge
- 100
- Reaktionspunkte
- 1
- Punkte
- 18
AW: CCam und UM I02
Ich habe es hinbekomme man bin ich doof
DD
ZebraDem Image 3.51 - Sagem D-BOX2 - Kernel 2.4.37-dbox2 (20:27:56)...
dbox login: root
BusyBox v1.7.2 (2009-04-24 03:11:30 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/var # cd /var/emu
/var/emu # ls
CCcam camd2 newcs version.txt
/var/emu # cd /var/bin
/var/bin # ls
capmtserver input msgbox pcamd tuxdns
/var/bin # Newcs -df
-sh: Newcs: not found
/var/bin # newcs -df
This is NewCS 1.62 - the New CardServer by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is enabled, set to: NewCSpwd
level: internal
type: all
output: console,tcp
logger config: level 16777215 type 255 output 5
Console log options: level 16777215 type 255
TCP log options: level 1 type 255
[ 20:28:51 ] [ Box detect ] Box type 4 (Dbox2)
[ 20:28:51 ] [ Config ] Option <blockc0> for device 0 (Phoenix on Com1) not pres
ent, defaulting to NO
[ 20:28:51 ] [ Config ] Option <crypto-special> for device 0 (Phoenix on Com1) n
ot present, defaulting to NO
[ 20:28:51 ] [ Config ] Option <PTShandshake> for device 0 (Phoenix on Com1) not
present, defaulting to NO
[ 20:28:51 ] [ Config ] Option <Seca-PPV> for device 0 (Phoenix on Com1) not pre
sent, defaulting to NO
[ 20:28:51 ] [ Config ] Pincode for device 0 (Phoenix on Com1): 0000
[ 20:28:51 ] [ Config ] Option <sid> for device 0 (Phoenix on Com1) not present,
no static sids added to filter
[ 20:28:51 ] [ Config ] /dev/ttyS0 ECM priority: round
[ 20:28:51 ] [ Chameleon2 ] Adding name myname on destination remote (Realm: myS
hares) on port 1234 - 0x1008bdd8 [ op ptr 0x1008cdf0 ]
[ 20:28:51 ] [ DNS ] Resolved Hostname localhost to: 127.0.0.1
[ 20:28:51 ] [ Newcamd ] Server name : newcs
[ 20:28:51 ] [ Newcamd ] Des key : 0102030405060708091011121314
[ 20:28:51 ] [ Config ] Option <hostname> or <port> not present for User: dummy,
DISABLING reverse login
[ 20:28:51 ] [ Config ] Option <readers> not present for User: dummy, NO reader
control enabled
[ 20:28:51 ] [ Newcamd ] User 2: dummy, Pass: dummy, Host none, Port: 0, Au: On,
Spider allowed: No, Sidoverride: No, level: 1
[ 20:28:51 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin
[ 20:28:51 ] [ EMM Cache ] Initialising dynamic Cache
[ 20:28:51 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 270
[ 20:28:51 ] Calibrating delay loops
[ 20:28:51 ] usleep(5) takes: 0 s 39 us
[ 20:28:51 ] usleep(10) takes: 0 s 38 us
[ 20:28:51 ] usleep(100) takes: 0 s 132 us
[ 20:28:51 ] usleep(500) takes: 0 s 529 us
[ 20:28:51 ] Allocation memory for 200 regular users
[ 20:28:51 ] [ Loader ] Starting Telnet on port 1001
[ 20:28:51 ] bind: error! 98: Address already in use
[ 20:28:51 ] [ SockSrv ] Could not Bind to port 1001 EXITING!
[ 20:28:51 ] [ SockSrv ] Stopping port 1001
[ 20:28:51 ] [ SockSrv ] Server thread started
Can't create server: Address already in use
[ 20:28:51 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 20:28:51 ] [ CardMan ] Reseting reader parameters
[ 20:28:51 ] [ Phoenix ] Opening device /dev/ttyS0
[ 20:28:51 ] [ Phoenix ] Could not get device /dev/ttyS0
[ 20:28:51 ] [ Loader ] Reset failed ...
[ 20:28:51 ] [ Card queue /dev/ttyS0 ] Starting...
[ 20:28:51 ] [ Loader ] Starting Newcamd Server on port 15050
[ 20:28:51 ] [ Newcamd ] Newcamd thread Server started on port 15050
[ 20:28:51 ] bind: error! 98: Address already in use
[ 20:28:51 ] [ Newcamd ] Stopping port 15050
[ 20:28:51 ] [ Loader ] Starting Radegast Server on port 10001
[ 20:28:51 ] bind: error! 98: Address already in use
[ 20:28:51 ] [ SockSrv ] Could not Bind to port 10001 EXITING!
[ 20:28:51 ] [ SockSrv ] Stopping port 10001
[ 20:28:51 ] [ SockSrv ] Server thread started
[ 20:28:51 ] [ NewCS ] Ready to GO!
/var/bin # Chameleon2 bind: Address already in use
/var/bin #
/var/bin #
Ich habe es hinbekomme man bin ich doof
DDZebraDem Image 3.51 - Sagem D-BOX2 - Kernel 2.4.37-dbox2 (20:27:56)...
dbox login: root
BusyBox v1.7.2 (2009-04-24 03:11:30 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/var # cd /var/emu
/var/emu # ls
CCcam camd2 newcs version.txt
/var/emu # cd /var/bin
/var/bin # ls
capmtserver input msgbox pcamd tuxdns
/var/bin # Newcs -df
-sh: Newcs: not found
/var/bin # newcs -df
This is NewCS 1.62 - the New CardServer by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is enabled, set to: NewCSpwd
level: internal
type: all
output: console,tcp
logger config: level 16777215 type 255 output 5
Console log options: level 16777215 type 255
TCP log options: level 1 type 255
[ 20:28:51 ] [ Box detect ] Box type 4 (Dbox2)
[ 20:28:51 ] [ Config ] Option <blockc0> for device 0 (Phoenix on Com1) not pres
ent, defaulting to NO
[ 20:28:51 ] [ Config ] Option <crypto-special> for device 0 (Phoenix on Com1) n
ot present, defaulting to NO
[ 20:28:51 ] [ Config ] Option <PTShandshake> for device 0 (Phoenix on Com1) not
present, defaulting to NO
[ 20:28:51 ] [ Config ] Option <Seca-PPV> for device 0 (Phoenix on Com1) not pre
sent, defaulting to NO
[ 20:28:51 ] [ Config ] Pincode for device 0 (Phoenix on Com1): 0000
[ 20:28:51 ] [ Config ] Option <sid> for device 0 (Phoenix on Com1) not present,
no static sids added to filter
[ 20:28:51 ] [ Config ] /dev/ttyS0 ECM priority: round
[ 20:28:51 ] [ Chameleon2 ] Adding name myname on destination remote (Realm: myS
hares) on port 1234 - 0x1008bdd8 [ op ptr 0x1008cdf0 ]
[ 20:28:51 ] [ DNS ] Resolved Hostname localhost to: 127.0.0.1
[ 20:28:51 ] [ Newcamd ] Server name : newcs
[ 20:28:51 ] [ Newcamd ] Des key : 0102030405060708091011121314
[ 20:28:51 ] [ Config ] Option <hostname> or <port> not present for User: dummy,
DISABLING reverse login
[ 20:28:51 ] [ Config ] Option <readers> not present for User: dummy, NO reader
control enabled
[ 20:28:51 ] [ Newcamd ] User 2: dummy, Pass: dummy, Host none, Port: 0, Au: On,
Spider allowed: No, Sidoverride: No, level: 1
[ 20:28:51 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin
[ 20:28:51 ] [ EMM Cache ] Initialising dynamic Cache
[ 20:28:51 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 270
[ 20:28:51 ] Calibrating delay loops
[ 20:28:51 ] usleep(5) takes: 0 s 39 us
[ 20:28:51 ] usleep(10) takes: 0 s 38 us
[ 20:28:51 ] usleep(100) takes: 0 s 132 us
[ 20:28:51 ] usleep(500) takes: 0 s 529 us
[ 20:28:51 ] Allocation memory for 200 regular users
[ 20:28:51 ] [ Loader ] Starting Telnet on port 1001
[ 20:28:51 ] bind: error! 98: Address already in use
[ 20:28:51 ] [ SockSrv ] Could not Bind to port 1001 EXITING!
[ 20:28:51 ] [ SockSrv ] Stopping port 1001
[ 20:28:51 ] [ SockSrv ] Server thread started
Can't create server: Address already in use
[ 20:28:51 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 20:28:51 ] [ CardMan ] Reseting reader parameters
[ 20:28:51 ] [ Phoenix ] Opening device /dev/ttyS0
[ 20:28:51 ] [ Phoenix ] Could not get device /dev/ttyS0
[ 20:28:51 ] [ Loader ] Reset failed ...
[ 20:28:51 ] [ Card queue /dev/ttyS0 ] Starting...
[ 20:28:51 ] [ Loader ] Starting Newcamd Server on port 15050
[ 20:28:51 ] [ Newcamd ] Newcamd thread Server started on port 15050
[ 20:28:51 ] bind: error! 98: Address already in use
[ 20:28:51 ] [ Newcamd ] Stopping port 15050
[ 20:28:51 ] [ Loader ] Starting Radegast Server on port 10001
[ 20:28:51 ] bind: error! 98: Address already in use
[ 20:28:51 ] [ SockSrv ] Could not Bind to port 10001 EXITING!
[ 20:28:51 ] [ SockSrv ] Stopping port 10001
[ 20:28:51 ] [ SockSrv ] Server thread started
[ 20:28:51 ] [ NewCS ] Ready to GO!
/var/bin # Chameleon2 bind: Address already in use
/var/bin #
/var/bin #
juventino3
Ist oft hier
- Registriert
- 11. April 2009
- Beiträge
- 100
- Reaktionspunkte
- 1
- Punkte
- 18
AW: CCam und UM I02
ZebraDem Image 3.51 - Sagem D-BOX2 - Kernel 2.4.37-dbox2 (21:20:17)...
dbox login: root
BusyBox v1.7.2 (2009-04-24 03:11:30 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/var # cd /var/emu
/var/emu # ls
CCcam camd2 newcs version.txt
/var/emu # bin
-sh: bin: not found
/var/emu # cd /var/bin
/var/bin # ls
capmtserver input msgbox pcamd tuxdns
/var/bin # killallnewcs -df
-sh: killallnewcs: not found
/var/bin # killall/newcs -df
-sh: killall/newcs: not found
/var/bin # killall
You need to specify whom to kill
/var/bin # newcs -df
This is NewCS 1.62 - the New CardServer by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is enabled, set to: NewCSpwd
level: internal
type: all
output: console,tcp
logger config: level 16777215 type 255 output 5
Console log options: level 16777215 type 255
TCP log options: level 1 type 255
[ 21:23:17 ] [ Box detect ] Box type 4 (Dbox2)
[ 21:23:17 ] [ Config ] Option <blockc0> for device 0 (Phoenix on Com1) not pres
ent, defaulting to NO
[ 21:23:17 ] [ Config ] Option <crypto-special> for device 0 (Phoenix on Com1) n
ot present, defaulting to NO
[ 21:23:17 ] [ Config ] Option <PTShandshake> for device 0 (Phoenix on Com1) not
present, defaulting to NO
[ 21:23:17 ] [ Config ] Option <Seca-PPV> for device 0 (Phoenix on Com1) not pre
sent, defaulting to NO
[ 21:23:17 ] [ Config ] Pincode for device 0 (Phoenix on Com1): 0000
[ 21:23:17 ] [ Config ] Option <sid> for device 0 (Phoenix on Com1) not present,
no static sids added to filter
[ 21:23:17 ] [ Config ] /dev/ttyS0 ECM priority: round
[ 21:23:17 ] [ Chameleon2 ] Adding name myname on destination remote (Realm: myS
hares) on port 1234 - 0x1008bdd8 [ op ptr 0x1008cdf0 ]
[ 21:23:17 ] [ DNS ] Resolved Hostname localhost to: 127.0.0.1
[ 21:23:17 ] [ Newcamd ] Server name : newcs
[ 21:23:17 ] [ Newcamd ] Des key : 0102030405060708091011121314
[ 21:23:17 ] [ Config ] Option <hostname> or <port> not present for User: dummy,
DISABLING reverse login
[ 21:23:17 ] [ Config ] Option <readers> not present for User: dummy, NO reader
control enabled
[ 21:23:17 ] [ Newcamd ] User 2: dummy, Pass: dummy, Host none, Port: 0, Au: On,
Spider allowed: No, Sidoverride: No, level: 1
[ 21:23:17 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin
[ 21:23:17 ] [ EMM Cache ] Initialising dynamic Cache
[ 21:23:17 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 299
[ 21:23:17 ] Calibrating delay loops
[ 21:23:17 ] usleep(5) takes: 0 s 38 us
[ 21:23:17 ] usleep(10) takes: 0 s 38 us
[ 21:23:17 ] usleep(100) takes: 0 s 132 us
[ 21:23:17 ] usleep(500) takes: 0 s 529 us
[ 21:23:17 ] Allocation memory for 200 regular users
[ 21:23:17 ] [ Loader ] Starting Telnet on port 1001
[ 21:23:17 ] [ SockSrv ] Server thread started
Can't create server: Address already in use
[ 21:23:17 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 21:23:17 ] [ CardMan ] Reseting reader parameters
[ 21:23:17 ] [ Phoenix ] Opening device /dev/ttyS0
[ 21:23:17 ] [ Phoenix ] Could not get device /dev/ttyS0
[ 21:23:17 ] [ Loader ] Reset failed ...
[ 21:23:17 ] bind: error! 98: Address already in use
[ 21:23:17 ] [ SockSrv ] Could not Bind to port 1001 EXITING!
[ 21:23:17 ] [ SockSrv ] Stopping port 1001
[ 21:23:17 ] [ Card queue /dev/ttyS0 ] Starting...
[ 21:23:17 ] [ Loader ] Starting Newcamd Server on port 15050
[ 21:23:17 ] [ Newcamd ] Newcamd thread Server started on port 15050
[ 21:23:17 ] bind: error! 98: Address already in use
[ 21:23:17 ] [ Newcamd ] Stopping port 15050
[ 21:23:17 ] [ Loader ] Starting Radegast Server on port 10001
[ 21:23:17 ] bind: error! 98: Address already in use
[ 21:23:17 ] [ SockSrv ] Could not Bind to port 10001 EXITING!
[ 21:23:17 ] [ SockSrv ] Stopping port 10001
[ 21:23:17 ] [ SockSrv ] Server thread started
[ 21:23:17 ] [ NewCS ] Ready to GO!
/var/bin # Chameleon2 bind: Address already in use
ZebraDem Image 3.51 - Sagem D-BOX2 - Kernel 2.4.37-dbox2 (21:20:17)...
dbox login: root
BusyBox v1.7.2 (2009-04-24 03:11:30 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/var # cd /var/emu
/var/emu # ls
CCcam camd2 newcs version.txt
/var/emu # bin
-sh: bin: not found
/var/emu # cd /var/bin
/var/bin # ls
capmtserver input msgbox pcamd tuxdns
/var/bin # killallnewcs -df
-sh: killallnewcs: not found
/var/bin # killall/newcs -df
-sh: killall/newcs: not found
/var/bin # killall
You need to specify whom to kill
/var/bin # newcs -df
This is NewCS 1.62 - the New CardServer by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is enabled, set to: NewCSpwd
level: internal
type: all
output: console,tcp
logger config: level 16777215 type 255 output 5
Console log options: level 16777215 type 255
TCP log options: level 1 type 255
[ 21:23:17 ] [ Box detect ] Box type 4 (Dbox2)
[ 21:23:17 ] [ Config ] Option <blockc0> for device 0 (Phoenix on Com1) not pres
ent, defaulting to NO
[ 21:23:17 ] [ Config ] Option <crypto-special> for device 0 (Phoenix on Com1) n
ot present, defaulting to NO
[ 21:23:17 ] [ Config ] Option <PTShandshake> for device 0 (Phoenix on Com1) not
present, defaulting to NO
[ 21:23:17 ] [ Config ] Option <Seca-PPV> for device 0 (Phoenix on Com1) not pre
sent, defaulting to NO
[ 21:23:17 ] [ Config ] Pincode for device 0 (Phoenix on Com1): 0000
[ 21:23:17 ] [ Config ] Option <sid> for device 0 (Phoenix on Com1) not present,
no static sids added to filter
[ 21:23:17 ] [ Config ] /dev/ttyS0 ECM priority: round
[ 21:23:17 ] [ Chameleon2 ] Adding name myname on destination remote (Realm: myS
hares) on port 1234 - 0x1008bdd8 [ op ptr 0x1008cdf0 ]
[ 21:23:17 ] [ DNS ] Resolved Hostname localhost to: 127.0.0.1
[ 21:23:17 ] [ Newcamd ] Server name : newcs
[ 21:23:17 ] [ Newcamd ] Des key : 0102030405060708091011121314
[ 21:23:17 ] [ Config ] Option <hostname> or <port> not present for User: dummy,
DISABLING reverse login
[ 21:23:17 ] [ Config ] Option <readers> not present for User: dummy, NO reader
control enabled
[ 21:23:17 ] [ Newcamd ] User 2: dummy, Pass: dummy, Host none, Port: 0, Au: On,
Spider allowed: No, Sidoverride: No, level: 1
[ 21:23:17 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin
[ 21:23:17 ] [ EMM Cache ] Initialising dynamic Cache
[ 21:23:17 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 299
[ 21:23:17 ] Calibrating delay loops
[ 21:23:17 ] usleep(5) takes: 0 s 38 us
[ 21:23:17 ] usleep(10) takes: 0 s 38 us
[ 21:23:17 ] usleep(100) takes: 0 s 132 us
[ 21:23:17 ] usleep(500) takes: 0 s 529 us
[ 21:23:17 ] Allocation memory for 200 regular users
[ 21:23:17 ] [ Loader ] Starting Telnet on port 1001
[ 21:23:17 ] [ SockSrv ] Server thread started
Can't create server: Address already in use
[ 21:23:17 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 21:23:17 ] [ CardMan ] Reseting reader parameters
[ 21:23:17 ] [ Phoenix ] Opening device /dev/ttyS0
[ 21:23:17 ] [ Phoenix ] Could not get device /dev/ttyS0
[ 21:23:17 ] [ Loader ] Reset failed ...
[ 21:23:17 ] bind: error! 98: Address already in use
[ 21:23:17 ] [ SockSrv ] Could not Bind to port 1001 EXITING!
[ 21:23:17 ] [ SockSrv ] Stopping port 1001
[ 21:23:17 ] [ Card queue /dev/ttyS0 ] Starting...
[ 21:23:17 ] [ Loader ] Starting Newcamd Server on port 15050
[ 21:23:17 ] [ Newcamd ] Newcamd thread Server started on port 15050
[ 21:23:17 ] bind: error! 98: Address already in use
[ 21:23:17 ] [ Newcamd ] Stopping port 15050
[ 21:23:17 ] [ Loader ] Starting Radegast Server on port 10001
[ 21:23:17 ] bind: error! 98: Address already in use
[ 21:23:17 ] [ SockSrv ] Could not Bind to port 10001 EXITING!
[ 21:23:17 ] [ SockSrv ] Stopping port 10001
[ 21:23:17 ] [ SockSrv ] Server thread started
[ 21:23:17 ] [ NewCS ] Ready to GO!
/var/bin # Chameleon2 bind: Address already in use
AW: CCam und UM I02
Teste doch mal das Bluepeer Image, von Boxcracker.us - ist eh' mein Favorit. Auf jeden Fall kann das standardmäßig einen Emu, also von Dir gewünscht CCcam, und die Cam2d parallel starten. Damit sollten ja Deine Probleme gelöst sein.
Teste doch mal das Bluepeer Image, von Boxcracker.us - ist eh' mein Favorit. Auf jeden Fall kann das standardmäßig einen Emu, also von Dir gewünscht CCcam, und die Cam2d parallel starten. Damit sollten ja Deine Probleme gelöst sein.
Zuletzt bearbeitet:
