1. Diese Seite verwendet Cookies. Wenn du dich weiterhin auf dieser Seite aufhältst, akzeptierst du unseren Einsatz von Cookies. Weitere Informationen

Talk Bekomme nach Update auf die freetz-devel-8888 den Cardreader nicht mehr ans laufen

Dieses Thema im Forum "Fritzbox Talk" wurde erstellt von funnymaus, 16. Mai 2012.

  1. funnymaus
    Offline

    funnymaus Ist gelegentlich hier

    Registriert:
    2. April 2011
    Beiträge:
    40
    Zustimmungen:
    2
    Punkte für Erfolge:
    8
    Hi, ich schon wieder.
    Nachdem ich gestern ja schmerzlich feststellen mußte dass ich die AutoUpdate Funktion in meiner Fritz 7270 V3 versehentlich noch aktiv stehen hatte und "nur " die normale Fritz Sicherung und keine Freetz Sicherung gespeichert hatte, mußte ich die Box neu freetzen und entsprechend einstellen. Das ganze hat mich bis 03:30 Uhr die Nacht und heute von 08:45 - 16:00 Uhr durchgehend von anderen Sachen abgehalten (z.B. schlafen - zum Glück habe ich Urlaub!)
    Ich dachte mir ich nehme dann direkt die aktuelle Version DEB_7270_v3_05.05-freetz-devel-8888 Stick Version, das hätte ich besser nicht getan!
    Nach etlichen Stunden habe ich mich dann entschieden die "alte" DEB_7270_v3_04.88freetz-devel-7014M wieder aufzuspielen (hört sich so leicht an) und den "alten Stick" mit der CCcam config, etc. zu nutzen. Auf jeden Fall hat es dann heute nachmittag endlich wieder geklappt und eigentlich könnte ich zufrieden sein......
    Aber ich habe zwischenzeitlich meine Ersatz Box 7270 V2 ausgegraben und dort parallel die DEB_7270_v2_05.05-freetz-devel-8888 aufgespielt weil ich auf der V3 den Cardreader (Easymouse 2 premium) nicht ans laufen bekam und die Box als Fehlerquelle ausschliessen wollte. Ich habe alles mögliche probiert, aber auch hier läuft der Cardreader nicht richtig, es wird einfach keine Karte eingelesen?! Ich habe eine S01 und wie gesagt ich habe sie unter der alten 04.88 Version am laufen, also stimmt irgendwas in der Konfiguration nicht. Ich möchte es aber hinbekommen und diese Box dann als Notfallbox auf Reserve liegen haben, wenn es bei anderen funzt, muß es bei mir auch funzen, da bin ich ehrgeizig und kenne keine Gnade gegen mich selber.
    Ich habe den Kartenleser nicht mehr angerührt seitdem er auf der einen Box läuft, die Karte ist also richtig gesteckt (2mm rausgezogen) nicht dass jemand auf diese Fehlermöglichkeit hinweisen möchte, die Schalter stehen 5V - SmartMouse - hoch - 6MHz.
    Ich habe sogar die funktionierende Config von der "alten" Version kopiert und in die neue eingtragen, es klappt einfach nicht.
    Hier mal meine CCcam Cfg von der funktionierenden 7270_v3_04.88:
    F: TONI .......... 0 1 1 { 0:0:1 }
    F: TONI_2 ...... 0 1 1 { 0:0:1 }
    F: Guido ........ 0 1 1 { 0:0:1 }
    #F: thomas ....... 0 1 1 { 0:0:1 }
    SERVER LISTEN PORT : 12000

    ALLOW WEBINFO: yes
    SHOW EXTENEDED CLIENT INFO : yes
    WEBINFO LISTEN PORT : 16001
    WEBINFO USERNAME : name
    WEBINFO PASSWORD : pass
    #ALLOW TELNETINFO: yes
    #TELNETINFO LISTEN PORT : 16000
    #TELNETINFO USERNAME : cccam
    #TELNETINFO PASSWORD : cccam
    SERIAL READER : /dev/ttyUSB0 phoenix
    EMM Blocker : no
    DISABLE EMM : yes
    EXTRA EMM LEVEL : yes
    SHOW TIMING : yes
    DEBUG : yes


    #SOFTKEY FILE : /var/media/ftp/uStor01/cs/cccam/SoftCam.Key
    #AUTOROLL FILE : /var/media/ftp/uStor01/cs/cccam/AutoRoll.Key
    #STATIC CW FILE : /var/media/ftp/uStor01/cs/cccam/constant.cw
    #CAID PRIO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.prio
    #PROVIDERINFO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.providers
    #CHANNELINFO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.channelinfo
    LOG WARNINGS : /var/media/ftp/uStor01/cs/cccam/warnings.txt
    cccam Log : /var/media/ftp/uStor01/etc/CCcamlog.log
    Softkey File : /var/etc/SoftCam.Key
    Autoroll File : /var/media/ftp/uStor01/etc/AutoRoll.Key
    Static Cw File : /var/etc/Constant.Cw
    Caid Prio File : /var/etc/CCcam.Prio
    Providerinfo File : /var/etc/CCcam.providers
    Channelinfo File : /var/etc/CCcam.channelinfo

    und hier die der neuen
    F: TONI ......... 0 1 1 { 0:0:1 }
    F: TONI_2 ...... 0 1 1 { 0:0:1 }
    F: Guido ........ 0 1 1 { 0:0:1 }
    #F: thomas ....... 0 1 1 { 0:0:1 }
    SERVER LISTEN PORT : 12000

    SERIAL READER : /dev/ttyUSB0 phoenix
    SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000


    WEBINFO LISTEN PORT : 16001
    TELNETINFO LISTEN PORT : 16000

    WEBINFO USERNAME : cccam
    WEBINFO PASSWORD : cccam
    SHOW TIMING : yes
    MINIMUM DOWNHOPS: 1
    ALLOW WEBINFO: yes
    SHOW TIMING : yes
    DEBUG : yes
    TRY ALL CHIDS : /dev/ttyUSB0
    #SMARTCARD SID REJECT: /dev/ttyUSB0 { e419 }
    #EMM Blocker : no
    #DISABLE EMM : no
    #EXTRA EMM LEVEL : yes
    #ALLOW TELNETINFO: yes
    #TELNETINFO USERNAME : cccam
    #TELNETINFO PASSWORD : cccam
    #SHOW EXTENEDED CLIENT INFO : yes




    SOFTKEY FILE : /var/media/ftp/uStor01/cs/cccam/SoftCam.Key
    AUTOROLL FILE : /var/media/ftp/uStor01/cs/cccam/AutoRoll.Key
    STATIC CW FILE : /var/media/ftp/uStor01/cs/cccam/constant.cw
    CAID PRIO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.prio
    PROVIDERINFO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.providers
    CHANNELINFO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.channelinfo
    LOG WARNINGS : /var/media/ftp/uStor01/cs/cccam/warnings.txt
    cccam Log : /var/media/ftp/uStor01/cs/cccam/cccamlog.txt
    habe den Eintrag für den Reader geändert da ich hier im Board gelesen habe dass die Einstellung so besser sein soll.
    So sieht es aus wenn ich 192.168.178.1:16001/ öffne:
    Current time 20:00:28
    NodeID: ba534282f95dda4b
    Uptime: 00d 00:50:30
    Connected clients: 2
    Active clients: 1
    Total handled client ecm's: 0
    Total handled client emm's: 0
    Peak load (max queued requests per workerthread): 1
    Connected clients: 2 1 ACTIVE CLIENT IN LAST 20 SECONDS +---------+---------------+------------+------------+--------+-----+--------+----------------------+----------+ | Username| Host | Connected | Idle time | ECM | EMM | Version| Last used share | Ecm time | +---------+---------------+------------+------------+--------+-----+--------+----------------------+----------+ |TONI |192.168.178.23 |00d 00:52:04|00d 00:00:00|4806 (0)|0 (0)|2.2.1 |1861:000000:001b (nok)| 0.001s | +---------+---------------+------------+------------+--------+-----+--------+----------------------+----------+ +---------+---------------------------------------+ | Username| Shareinfo | +---------+---------------------------------------+ | TONI|local 1702:000000 1602(0) | | |local 1722:000000 801(0) | | |local 1837:000000 801(0) | | |local 1834:000000 801(0) | | |local 1861:000000 801(0) | | TONI_2| | +---------+---------------------------------------+
    Connected clients: 2 +---------+---------------+------------+------------+--------+-----+--------+----------------------+----------+ | Username| Host | Connected | Idle time | ECM | EMM | Version| Last used share | Ecm time | +---------+---------------+------------+------------+--------+-----+--------+----------------------+----------+ |TONI |192.168.178.23 |00d 00:52:26|00d 00:00:00|4837 (0)|0 (0)|2.2.1 |1702:000000:001b (nok)| 0.000s | |TONI_2 |192.168.178.21 |00d 00:52:12|00d 00:52:12|0 (0) |0 (0)|2.2.1 | | | +---------+---------------+------------+------------+--------+-----+--------+----------------------+----------+ +---------+---------------------------------------+ | Username| Shareinfo | +---------+---------------------------------------+ | TONI|local 1702:000000 1613(0) | | |local 1722:000000 806(0) | | |local 1837:000000 806(0) | | |local 1834:000000 806(0) | | |local 1861:000000 806(0) | | TONI_2| | +---------+-----------------------
    card reader /dev/ttyUSB0 no or unknown card inserted

    USB Comport mit einem Treiber aktivieren ist Haken drin
    FTDI_SIO ist ausgewählt

    Im Treiber-Konfig-TOOL in der Toolbox sieht es so aus:

    STATUS: Running
    ftdi_sio aktivieren -- > Treiber geladen
    Aktivieren ----> kHz: 6000
    Modus: Phoenix



    hier noch das Syslog:
    May 16 22:08:30 fritz user.info kernel: SysRq : Changing Loglevel May 16 22:08:30 fritz user.warn kernel: Loglevel set to 4 May 16 22:08:30 fritz user.warn kernel: [4294945551]system-load 100 % 71 tasks:25 % curr:modreg(0 %) max:telefon(6 %, pid:2230), readytorun: 3, pgfault 6401/s (max 3 avg 1.0) May 16 22:08:30 fritz user.info kernel: usbcore: registered new interface driver usbserial May 16 22:08:30 fritz user.info kernel: USB Serial support registered for generic May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: [4294951335]system-load 3 77 tasks:2 % curr:usb2serial.cgi(0 %) max:extra(0 %, pid:5078), readytorun: 2, pgfault 1403/s (max 1 avg 1.0) May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 20:08:30 fritz daemon.debug CCcam: card detect fail May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:08:30 fritz user.warn kernel: [329556]system-load 1 72 tasks:1 % curr:mod.cgi(0 %) max:cccam(0 %, pid:3769), readytorun: 5, pgfault 18/s (max 1 avg 1.0) May 16 22:08:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:08:30 fritz user.warn kernel: [331279]system-load 1 73 tasks:3 % curr:klogd(1 %) max:klogd(1 %, pid:6495), readytorun: 4, pgfault 745/s (max 1 avg 1.0) May 16 20:08:30 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 1, ident: 0) no key May 16 20:08:30 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1834(0x0) sid 0x1b ok: 0 (took 0.001 seconds) May 16 20:08:30 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 1, ident: 0) no key May 16 20:08:30 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1861(0x0) sid 0x1b ok: 0 (took 0.001 seconds) May 16 20:08:31 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds) May 16 20:08:31 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1722(0x0) sid 0x1b ok: 0 (took 0.011 seconds) May 16 20:08:31 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key May 16 20:08:31 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1837(0x0) sid 0x1b ok: 0 (took 0.001 seconds) May 16 20:08:32 fritz daemon.debug CCcam: card detect fail May 16 20:08:32 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds) May 16 20:08:32 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 1, ident: 0) no key May 16 20:08:32 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1834(0x0) sid 0x1b ok: 0 (took 0.001 seconds) May 16 20:08:32 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 1, ident: 0) no key May 16 20:08:32 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1861(0x0) sid 0x1b ok: 0 (took 0.001 seconds) May 16 20:08:33 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds) May 16 20:08:33 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1722(0x0) sid 0x1b ok: 0 (took 0.000 seconds) May 16 20:08:33 fritz daemon.debug CCcam: card detect fail May 16 20:08:34 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key May 16 20:08:34 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1837(0x0) sid 0x1b ok: 0 (took 0.001 seconds) May 16 20:08:34 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds) May 16 20:08:34 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 1, ident: 0) no key May 16 20:08:34 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1834(0x0) sid 0x1b ok: 0 (took 0.001 seconds) May 16 20:08:35 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 1, ident: 0) no key May 16 20:08:35 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1861(0x0) sid 0x1b ok: 0 (took 0.001 seconds) May 16 20:08:35 fritz daemon.debug CCcam: card detect fail May 16 20:08:37 fritz daemon.debug CCcam: card detect fail May 16 20:08:39 fritz daemon.debug CCcam: card detect fail May 16 20:08:40 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds) May 16 22:08:40 fritz user.warn kernel: [332352]system-load 8 77 tasks:8 % curr:conf(0 %) max:conf(5 %, pid:6679), readytorun: 1, pgfault 8608/s (max 1 avg 1.0) May 16 20:08:41 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1722(0x0) sid 0x1b ok: 0 (took 0.011 seconds) May 16 20:08:41 fritz daemon.debug CCcam: card detect fail May 16 20:08:41 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key May 16 20:08:41 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1837(0x0) sid 0x1b ok: 0 (took 0.013 seconds) May 16 20:08:41 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds) May 16 20:08:42 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key May 16 20:08:42 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1834(0x0) sid 0x1b ok: 0 (took 0.002 seconds) May 16 20:08:42 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 1, ident: 0) no key May 16 20:08:42 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1861(0x0) sid 0x1b ok: 0 (took 0.001 seconds) May 16 20:08:42 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds) May 16 20:08:42 fritz daemon.debug CCcam: card detect fail May 16 20:08:43 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1722(0x0) sid 0x1b ok: 0 (took 0.000 seconds) May 16 20:08:43 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key May 16 20:08:43 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1837(0x0) sid 0x1b ok: 0 (took 0.001 seconds) May 16 20:08:43 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds) May 16 20:08:44 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key May 16 20:08:44 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1834(0x0) sid 0x1b ok: 0 (took 0.001 seconds) May 16 20:08:44 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key May 16 20:08:44 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1861(0x0) sid 0x1b ok: 0 (took 0.001 seconds) May 16 20:08:44 fritz daemon.debug CCcam: card detect fail May 16 20:08:44 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds) May 16 20:08:45 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1722(0x0) sid 0x1b ok: 0 (took 0.000 seconds) May 16 20:08:45 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key May 16 20:08:45 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1837(0x0) sid 0x1b ok: 0 (took 0.001 seconds) May 16 20:08:46 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds) May 16 20:08:46 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key May 16 20:08:46 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1834(0x0) sid 0x1b ok: 0 (took 0.001 seconds) May 16 20:08:46 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key May 16 20:08:46 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1861(0x0) sid 0x1b ok: 0 (took 0.001 seconds) May 16 20:08:46 fritz daemon.debug CCcam: card detect fail
    Kann mir jemand weiterhelfen was ich einstellen muß dass es läuft?
     
    #1
  2. phantom

    Nervigen User Advertisement

  3. Barbar67
    Offline

    Barbar67 Ist gelegentlich hier

    Registriert:
    10. Oktober 2008
    Beiträge:
    80
    Zustimmungen:
    28
    Punkte für Erfolge:
    18
    Beruf:
    Auftragskiller
    Ort:
    Planet Erde
    wenn du jetzt 05.05 drauf hast entferne phoenix, dann sollte dann alles laufen:
    SERIAL READER: /dev/ttyUSB0
    SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000
    Aber easymouse auf phoenix stellen( habs bei mir so). Wenn es immer noch nicht geht.
    MfG.
     
    Zuletzt bearbeitet: 16. Mai 2012
    #2
  4. funnymaus
    Offline

    funnymaus Ist gelegentlich hier

    Registriert:
    2. April 2011
    Beiträge:
    40
    Zustimmungen:
    2
    Punkte für Erfolge:
    8
    Hallo Barbar67,
    Danke für deine Hilfe, allerdings die Eintragänderung "Phoenix" entfernen behebt das Problem nicht, so sieht das Syslog nach dem entfernen des Phoenix Eintrags aus:
    May 16 22:52:06 fritz user.warn kernel: 62 5310n 20 HT40 1 0 0 Y May 16 22:52:06 fritz user.warn kernel: 64 5320n 20 HT20 1 1 0 Y May 16 22:52:06 fritz user.warn kernel: 100 5500n 27 HT20 1 0 1 Y May 16 22:52:06 fritz user.warn kernel: 102 5510n 27 HT40 1 0 0 Y May 16 22:52:06 fritz user.warn kernel: 104 5520n 27 HT20 1 1 0 Y May 16 22:52:06 fritz user.warn kernel: 108 5540n 27 HT20 1 0 1 Y May 16 22:52:06 fritz user.warn kernel: 110 5550n 27 HT40 1 0 0 Y May 16 22:52:06 fritz user.warn kernel: 112 5560n 27 HT20 1 1 0 Y May 16 22:52:06 fritz user.warn kernel: 116 5580n 27 HT20 1 0 1 Y May 16 22:52:06 fritz user.warn kernel: 118 5590n 27 HT40 1 0 0 Y May 16 22:52:06 fritz user.warn kernel: 120 5600n 27 HT20 1 1 0 Y May 16 22:52:06 fritz user.warn kernel: 124 5620n 27 HT20 1 0 1 Y May 16 22:52:06 fritz user.warn kernel: 126 5630n 27 HT40 1 0 0 Y May 16 22:52:06 fritz user.warn kernel: 128 5640n 27 HT20 1 1 0 Y May 16 22:52:06 fritz user.warn kernel: 132 5660n 27 HT20 1 0 1 Y May 16 22:52:06 fritz user.warn kernel: 134 5670n 27 HT40 1 0 0 Y May 16 22:52:06 fritz user.warn kernel: 136 5680n 27 HT20 1 1 0 Y May 16 22:52:06 fritz user.warn kernel: 140 5700n 27 HT20 1 0 0 Y May 16 22:52:06 fritz user.debug kernel: get_wlan_memory: (Rx) dd->dd_desc: b7fa3000, dd->dd_desc_paddr: 17fa3000, dd->dd_desc_len: 9000, *bf: 97fad000 May 16 22:52:06 fritz user.debug kernel: get_wlan_memory: (Tx) dd->dd_desc: b7f60000, dd->dd_desc_paddr: 17f60000, dd->dd_desc_len: 23280, *bf: 97f84000 May 16 22:52:06 fritz user.err kernel: ath_descdma_setup: beacon DMA map: b654a000 (1152) -> physical 1654a000 (1152) May 16 22:52:06 fritz user.warn kernel: dfs_init_radar_filters: dfs->dfs_rinfo.rn_numradars: 0 May 16 22:52:06 fritz user.warn kernel: DFS min filter rssiThresh = 21 May 16 22:52:06 fritz user.warn kernel: DFS max pulse dur = 131 ticks May 16 22:52:06 fritz user.err kernel: wifi%d: spectral scan functionality not supported May 16 22:52:06 fritz user.warn kernel: ic_chainmask=7x7 May 16 22:52:06 fritz user.warn kernel: wifi0: 11na rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps May 16 22:52:06 fritz user.warn kernel: wifi0: 11na MCS: 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 May 16 22:52:06 fritz user.warn kernel: wifi0: 11ng rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps May 16 22:52:06 fritz user.warn kernel: wifi0: 11ng MCS: 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 May 16 22:52:06 fritz user.warn kernel: wifi0: mac 13.2 phy 8.1 radio 12.0 May 16 22:52:06 fritz user.warn kernel: wifi0: Use hw queue 1 for WME_AC_BE traffic May 16 22:52:06 fritz user.warn kernel: wifi0: Use hw queue 0 for WME_AC_BK traffic May 16 22:52:06 fritz user.warn kernel: wifi0: Use hw queue 2 for WME_AC_VI traffic May 16 22:52:06 fritz user.warn kernel: wifi0: Use hw queue 3 for WME_AC_VO traffic May 16 22:52:06 fritz user.warn kernel: wifi0: Use hw queue 8 for CAB traffic May 16 22:52:06 fritz user.warn kernel: wifi0: Use hw queue 9 for beacons May 16 22:52:06 fritz user.warn kernel: wifi0: Use hw queue 7 for UAPSD May 16 22:52:06 fritz user.info kernel: avm_net_trace: New net trace device 'HW (2.4 + 5 GHz, wifi0)' registered with minor 128. May 16 22:52:06 fritz user.info kernel: wifi0: Atheros 5416 PCI: mem=0x40000000, irq=80 hw_base=0xc01c0000 May 16 22:52:06 fritz user.warn kernel: dect_uicp_from_dect, ignore 16 bytes, dect_manager not up: %B May 16 22:52:06 fritz user.warn kernel: [4294943529]system-load 100 % 54 tasks:19 % curr:rc.wlan(0 %) max:upnpd(9 %, pid:1138), readytorun: 1, pgfault 5728/s (max 2 avg 1.0) May 16 22:52:06 fritz user.info kernel: wlan: mac acl policy registered May 16 22:52:06 fritz user.info kernel: avm_net_trace: New net trace device 'AP (2.4 + 5 GHz, ath0)' registered with minor 130. May 16 22:52:06 fritz user.info kernel: avm_net_trace: New net trace device 'AP (2.4 + 5 GHz, ath0)' registered with minor 131. May 16 22:52:06 fritz user.warn kernel: dect_uicp_from_dect, ignore 16 bytes, dect_manager not up: %B May 16 20:52:06 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 1, ident: 0) no key May 16 20:52:06 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1861(0x0) sid 0x1b ok: 0 (took 0.001 seconds) May 16 22:52:06 fritz user.warn kernel: [dsl_ur8] Successfully opened vpi=1 vci=35 chan=0 May 16 22:52:06 fritz user.warn kernel: [dsl_ur8] activating vpi=1 vci=32 May 16 22:52:06 fritz user.warn kernel: [dsl_ur8] DDC_cpsarChOpen done:0: Ch=1, Dir=RX May 16 22:52:06 fritz user.warn kernel: [dsl_ur8] DDC_cpsarChOpen done:0: Ch=1, Dir=TX May 16 22:52:06 fritz user.warn kernel: [dsl_ur8] Successfully opened vpi=1 vci=32 chan=1 May 16 22:52:06 fritz user.info kernel: kdsld_token_thread: start May 16 22:52:06 fritz user.info kernel: sch_llq: Jul 1 2011 14:42:09 May 16 22:52:06 fritz user.warn kernel: AVM_WATCHDOG: System Init UEberwachung abgeschlossen (403880 ms noch verfuegbar) May 16 22:52:06 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_cpuclock: norm_power_rate=100 act_rate=100 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=0 mW May 16 22:52:06 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_systemclock: norm_power_rate=100 act_rate=100 mul=65 div=10 offset=1793 NormP=2443 mW -> SumNormP=2443 mW May 16 22:52:06 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_wlan: norm_power_rate=100 act_rate=100 mul=84 div=10 offset=100 NormP=940 mW -> SumNormP=3383 mW May 16 22:52:06 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_isdnnt: norm_power_rate=100 act_rate=0 mul=1 div=1 offset=0 NormP=100 mW -> SumNormP=3483 mW May 16 22:52:06 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_isdnte: norm_power_rate=100 act_rate=0 mul=1 div=1 offset=0 NormP=100 mW -> SumNormP=3583 mW May 16 22:52:06 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_analog: norm_power_rate=200 act_rate=0 mul=141 div=10 offset=100 NormP=2920 mW -> SumNormP=6503 mW May 16 22:52:06 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_dect: norm_power_rate=100 act_rate=0 mul=200 div=78 offset=150 NormP=406 mW -> SumNormP=6909 mW May 16 22:52:06 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_ethernet: norm_power_rate=467 act_rate=1174405494 mul=1 div=1 offset=50 NormP=517 mW -> SumNormP=7426 mW May 16 22:52:06 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_dsl: norm_power_rate=100 act_rate=100 mul=15 div=1 offset=0 NormP=1500 mW -> SumNormP=8926 mW May 16 22:52:06 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_usb_host: norm_power_rate=500 act_rate=100 mul=55 div=10 offset=0 NormP=2750 mW -> SumNormP=11676 mW May 16 22:52:06 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_usb_client: norm_power_rate=0 act_rate=0 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=11676 mW May 16 22:52:06 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_charge: norm_power_rate=446 act_rate=0 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=11676 mW May 16 22:52:06 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_loadrate: norm_power_rate=100 act_rate=95 mul=29 div=10 offset=-17 NormP=273 mW -> SumNormP=11949 mW May 16 22:52:06 fritz user.info kernel: SysRq : Changing Loglevel May 16 22:52:06 fritz user.warn kernel: Loglevel set to 4 May 16 22:52:06 fritz user.warn kernel: [4294945530]system-load 100 % 69 tasks:26 % curr:rc.S(0 %) max:telefon(6 %, pid:2227), readytorun: 1, pgfault 5930/s (max 3 avg 1.0) May 16 22:52:06 fritz user.warn kernel: [4294946530]system-load 100 % 72 tasks:8 % curr:rc.S(2 %) max:ctlmgr(2 %, pid:1114), readytorun: 2, pgfault 8399/s (max 2 avg 1.0) May 16 22:52:06 fritz user.info kernel: usbcore: registered new interface driver usbserial May 16 22:52:06 fritz user.info kernel: USB Serial support registered for generic May 16 22:52:06 fritz user.info kernel: usbcore: registered new interface driver usbserial_generic May 16 22:52:06 fritz user.info kernel: usbserial: USB Serial Driver core May 16 22:52:06 fritz user.info kernel: USB Serial support registered for FTDI USB Serial Device May 16 22:52:06 fritz user.info kernel: ftdi_sio 1-1.3.3:1.0: FTDI USB Serial Device converter detected May 16 22:52:06 fritz user.info kernel: usb 1-1.3.3: Detected FT232RL May 16 22:52:06 fritz user.info kernel: usb 1-1.3.3: Number of endpoints 2 May 16 22:52:06 fritz user.info kernel: usb 1-1.3.3: Endpoint 1 MaxPacketSize 64 May 16 22:52:06 fritz user.info kernel: usb 1-1.3.3: Endpoint 2 MaxPacketSize 64 May 16 22:52:06 fritz user.info kernel: usb 1-1.3.3: Setting MaxPacketSize 64 May 16 22:52:06 fritz user.info kernel: usb 1-1.3.3: FTDI USB Serial Device converter now attached to ttyUSB0 May 16 22:52:06 fritz user.info kernel: usbcore: registered new interface driver ftdi_sio May 16 22:52:06 fritz user.info kernel: ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver May 16 22:52:06 fritz user.warn kernel: Algorithmics/MIPS FPU Emulator v1.5 May 16 22:52:06 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:52:06 fritz user.warn kernel: [4294947719]system-load 2 83 tasks:9 % curr:conf(0 %) max:cccam(2 %, pid:3956), readytorun: 2, pgfault 4999/s (max 2 avg 1.0) May 16 22:52:06 fritz user.warn kernel: [4294948738]system-load 9 84 tasks:10 % curr:menu-update(0 %) max:menu-update(2 %, pid:4797), readytorun: 2, pgfault 9859/s (max 1 avg 1.0) May 16 22:52:06 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:52:06 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:52:06 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0 May 16 22:52:06 fritz user.warn kernel: [4294951571]system-load 100 % 76 tasks:3 % curr:conf(0 %) max:conf(0 %, pid:5798), readytorun: 1, pgfault 3528/s (max 2 avg 1.0) May 16 22:52:06 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 22:52:06 fritz user.warn kernel: [4294954256]system-load 6 75 tasks:2 % curr:rc.dsld(0 %) max:klogd(0 %, pid:6752), readytorun: 2, pgfault 3230/s (max 1 avg 1.0) May 16 20:52:06 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds) May 16 20:52:07 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1722(0x0) sid 0x1b ok: 0 (took 0.000 seconds) May 16 20:52:07 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key May 16 20:52:07 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1837(0x0) sid 0x1b ok: 0 (took 0.001 seconds) May 16 20:52:08 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds) May 16 20:52:08 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key May 16 20:52:08 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1834(0x0) sid 0x1b ok: 0 (took 0.001 seconds) May 16 20:52:08 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 1, ident: 0) no key May 16 20:52:08 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1861(0x0) sid 0x1b ok: 0 (took 0.001 seconds) May 16 20:52:09 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds) May 16 20:52:09 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1722(0x0) sid 0x1b ok: 0 (took 0.000 seconds) May 16 20:52:09 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key May 16 20:52:09 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1837(0x0) sid 0x1b ok: 0 (took 0.001 seconds) May 16 20:52:10 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds) May 16 20:52:10 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key May 16 20:52:10 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1834(0x0) sid 0x1b ok: 0 (took 0.001 seconds) May 16 20:52:10 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 1, ident: 0) no key May 16 20:52:10 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1861(0x0) sid 0x1b ok: 0 (took 0.001 seconds) May 16 20:52:16 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds) May 16 22:52:16 fritz user.warn kernel: [4294955265]system-load 7 79 tasks:9 % curr:conf(0 %) max:conf(4 %, pid:7092), readytorun: 1, pgfault 7299/s (max 1 avg 1.0) May 16 20:52:16 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1722(0x0) sid 0x1b ok: 0 (took 0.000 seconds) May 16 20:52:17 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key May 16 20:52:17 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1837(0x0) sid 0x1b ok: 0 (took 0.001 seconds) May 16 20:52:17 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds) May 16 20:52:17 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key May 16 20:52:17 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1834(0x0) sid 0x1b ok: 0 (took 0.001 seconds) May 16 20:52:18 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key May 16 20:52:18 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1861(0x0) sid 0x1b ok: 0 (took 0.001 seconds) May 16 20:52:18 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds) May 16 20:52:19 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1722(0x0) sid 0x1b ok: 0 (took 0.000 seconds) May 16 20:52:19 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key May 16 20:52:19 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1837(0x0) sid 0x1b ok: 0 (took 0.001 seconds) May 16 22:52:19 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200 May 16 20:52:19 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds)
    May 16 22:52:19 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200
    May 16 20:52:20 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key

    May 16 20:52:20 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1834(0x0) sid 0x1b ok: 0 (took 0.001 seconds)
    May 16 22:52:20 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200
    May 16 20:52:20 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
    May 16 20:52:20 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1861(0x0) sid 0x1b ok: 0 (took 0.001 seconds)
    May 16 20:52:20 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds)
    May 16 20:52:21 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1722(0x0) sid 0x1b ok: 0 (took 0.000 seconds)
    May 16 20:52:21 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
    May 16 20:52:21 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1837(0x0) sid 0x1b ok: 0 (took 0.001 seconds)
    May 16 20:52:22 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds)
    weiß jemand was die markierten Einträge zu heiße haben, denke mal damit könnte es zusammenhängen?

    und so sieht es dann nach dem ändern des Schalters an der Easymouse 2 "von SmartMouse auf Phoenix" aus - übrigens klappt es auch dann nicht:
    May 16 23:03:51 fritz user.warn kernel: wifi0: Use hw queue 1 for WME_AC_BE traffic
    May 16 23:03:51 fritz user.warn kernel: wifi0: Use hw queue 0 for WME_AC_BK traffic
    May 16 23:03:51 fritz user.warn kernel: wifi0: Use hw queue 2 for WME_AC_VI traffic
    May 16 23:03:51 fritz user.warn kernel: wifi0: Use hw queue 3 for WME_AC_VO traffic
    May 16 23:03:51 fritz user.warn kernel: wifi0: Use hw queue 8 for CAB traffic
    May 16 23:03:51 fritz user.warn kernel: wifi0: Use hw queue 9 for beacons
    May 16 23:03:51 fritz user.warn kernel: wifi0: Use hw queue 7 for UAPSD
    May 16 23:03:51 fritz user.info kernel: avm_net_trace: New net trace device 'HW (2.4 + 5 GHz, wifi0)' registered with minor 128.
    May 16 23:03:51 fritz user.info kernel: wifi0: Atheros 5416 PCI: mem=0x40000000, irq=80 hw_base=0xc01c0000
    May 16 23:03:51 fritz user.warn kernel: [4294943558]system-load 100 % 54 tasks:27 % curr:multid(1 %) max:busybox(10 %, pid:1992), readytorun: 4, pgfault 5716/s (max 2 avg 1.0)
    May 16 23:03:51 fritz user.info kernel: wlan: mac acl policy registered
    May 16 23:03:51 fritz user.info kernel: avm_net_trace: New net trace device 'AP (2.4 + 5 GHz, ath0)' registered with minor 130.
    May 16 23:03:51 fritz user.info kernel: avm_net_trace: New net trace device 'AP (2.4 + 5 GHz, ath0)' registered with minor 131.
    May 16 23:03:51 fritz user.warn kernel: dect_uicp_from_dect, ignore 16 bytes, dect_manager not up: %B
    May 16 23:03:51 fritz user.info kernel: device ath0 entered promiscuous mode
    May 16 23:03:51 fritz user.info kernel: lan: port 2(ath0) entering forwarding state
    May 16 23:03:51 fritz user.warn kernel: [dsl_ur8] ioctl set inventory invoked
    May 16 23:03:51 fritz user.warn kernel: [dsl_ur8] dsl serial number successfully set to "303031463346354135323743204621426f78373237302035342e30352e303500"
    May 16 23:03:51 fritz user.warn kernel: [dsl_ur8] ioctl set inventory invoked
    May 16 23:03:51 fritz user.warn kernel: [dsl_ur8] dsl serial number successfully set to "303031463346354135323743204621426f78373237302035342e30352e303500"
    May 16 23:03:51 fritz user.warn kernel: dect_uicp_from_dect, ignore 16 bytes, dect_manager not up: %B
    May 16 23:03:51 fritz user.warn kernel: [4294944559]system-load 100 % 61 tasks:19 % curr:wlancfgctl(0 %) max:hostapd(5 %, pid:2163), readytorun: 1, pgfault 5331/s (max 2 avg 1.0)
    May 16 23:03:51 fritz user.err kernel: [dsl_ur8] DSL in Sync
    May 16 23:03:51 fritz user.warn kernel: [dsl_ur8] dslhal_support_processMailBox: Received DSP_ATM_TC_SYNC at 4294944885
    May 16 23:03:51 fritz user.err kernel: [dsl_ur8] ATM TC in Sync
    May 16 23:03:51 fritz user.warn kernel: dect_uicp_from_dect, ignore 16 bytes, dect_manager not up: %B
    May 16 23:03:51 fritz user.warn kernel: [dsl_ur8] activating vpi=1 vci=35
    May 16 23:03:51 fritz user.warn kernel: [dsl_ur8] DDC_cpsarChOpen done:0: Ch=0, Dir=RX
    May 16 23:03:51 fritz user.warn kernel: [dsl_ur8] DDC_cpsarChOpen done:0: Ch=0, Dir=TX
    May 16 23:03:51 fritz user.warn kernel: [dsl_ur8] Successfully opened vpi=1 vci=35 chan=0
    May 16 23:03:51 fritz user.warn kernel: [dsl_ur8] activating vpi=1 vci=32
    May 16 23:03:51 fritz user.warn kernel: [dsl_ur8] DDC_cpsarChOpen done:0: Ch=1, Dir=RX
    May 16 23:03:51 fritz user.warn kernel: [dsl_ur8] DDC_cpsarChOpen done:0: Ch=1, Dir=TX
    May 16 23:03:51 fritz user.warn kernel: [dsl_ur8] Successfully opened vpi=1 vci=32 chan=1
    May 16 23:03:51 fritz user.info kernel: kdsld_token_thread: start
    May 16 23:03:51 fritz user.info kernel: sch_llq: Jul 1 2011 14:42:09
    May 16 23:03:51 fritz user.warn kernel: AVM_WATCHDOG: System Init UEberwachung abgeschlossen (403700 ms noch verfuegbar)
    May 16 21:03:51 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds)
    May 16 23:03:51 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_cpuclock: norm_power_rate=100 act_rate=100 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=0 mW
    May 16 23:03:51 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_systemclock: norm_power_rate=100 act_rate=100 mul=65 div=10 offset=1793 NormP=2443 mW -> SumNormP=2443 mW
    May 16 23:03:51 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_wlan: norm_power_rate=100 act_rate=100 mul=84 div=10 offset=100 NormP=940 mW -> SumNormP=3383 mW
    May 16 23:03:51 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_isdnnt: norm_power_rate=100 act_rate=-2147418012 mul=1 div=1 offset=0 NormP=100 mW -> SumNormP=3483 mW
    May 16 23:03:51 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_isdnte: norm_power_rate=100 act_rate=0 mul=1 div=1 offset=0 NormP=100 mW -> SumNormP=3583 mW
    May 16 23:03:51 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_analog: norm_power_rate=200 act_rate=0 mul=141 div=10 offset=100 NormP=2920 mW -> SumNormP=6503 mW
    May 16 23:03:51 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_dect: norm_power_rate=100 act_rate=0 mul=200 div=78 offset=150 NormP=406 mW -> SumNormP=6909 mW
    May 16 23:03:51 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_ethernet: norm_power_rate=467 act_rate=1174405494 mul=1 div=1 offset=50 NormP=517 mW -> SumNormP=7426 mW
    May 16 23:03:51 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_dsl: norm_power_rate=100 act_rate=100 mul=15 div=1 offset=0 NormP=1500 mW -> SumNormP=8926 mW
    May 16 23:03:51 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_usb_host: norm_power_rate=500 act_rate=100 mul=55 div=10 offset=0 NormP=2750 mW -> SumNormP=11676 mW
    May 16 23:03:51 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_usb_client: norm_power_rate=0 act_rate=0 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=11676 mW
    May 16 23:03:51 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_charge: norm_power_rate=446 act_rate=0 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=11676 mW
    May 16 23:03:51 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_loadrate: norm_power_rate=100 act_rate=95 mul=29 div=10 offset=-17 NormP=273 mW -> SumNormP=11949 mW
    May 16 23:03:51 fritz user.info kernel: SysRq : Changing Loglevel
    May 16 23:03:51 fritz user.warn kernel: Loglevel set to 4
    May 16 23:03:51 fritz user.warn kernel: [4294945559]system-load 100 % 73 tasks:30 % curr:ar7cfgctl(0 %) max:telefon(6 %, pid:2225), readytorun: 2, pgfault 5951/s (max 3 avg 1.0)
    May 16 23:03:51 fritz user.info kernel: usbcore: registered new interface driver usbserial
    May 16 23:03:51 fritz user.info kernel: USB Serial support registered for generic
    May 16 23:03:51 fritz user.info kernel: usbcore: registered new interface driver usbserial_generic
    May 16 23:03:51 fritz user.info kernel: usbserial: USB Serial Driver core
    May 16 23:03:51 fritz user.info kernel: USB Serial support registered for FTDI USB Serial Device
    May 16 23:03:51 fritz user.info kernel: ftdi_sio 1-1.3.3:1.0: FTDI USB Serial Device converter detected
    May 16 23:03:51 fritz user.info kernel: usb 1-1.3.3: Detected FT232RL
    May 16 23:03:51 fritz user.info kernel: usb 1-1.3.3: Number of endpoints 2
    May 16 23:03:51 fritz user.info kernel: usb 1-1.3.3: Endpoint 1 MaxPacketSize 64
    May 16 23:03:51 fritz user.info kernel: usb 1-1.3.3: Endpoint 2 MaxPacketSize 64
    May 16 23:03:51 fritz user.info kernel: usb 1-1.3.3: Setting MaxPacketSize 64
    May 16 23:03:51 fritz user.info kernel: usb 1-1.3.3: FTDI USB Serial Device converter now attached to ttyUSB0
    May 16 23:03:51 fritz user.info kernel: usbcore: registered new interface driver ftdi_sio
    May 16 23:03:51 fritz user.info kernel: ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
    May 16 23:03:51 fritz user.warn kernel: Algorithmics/MIPS FPU Emulator v1.5
    May 16 23:03:51 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    May 16 23:03:51 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    May 16 23:03:51 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    May 16 23:03:51 fritz user.warn kernel: [4294948069]system-load 9 76 tasks:5 % curr:modreg(0 %) max:cccam(1 %, pid:3759), readytorun: 1, pgfault 5353/s (max 2 avg 1.0)
    May 16 23:03:51 fritz user.warn kernel: [4294949160]system-load 100 % 79 tasks:10 % curr:modreg(0 %) max:menu-update(3 %, pid:4072), readytorun: 2, pgfault 10565/s (max 1 avg 1.0)
    May 16 23:03:51 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    May 16 23:03:51 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200
    May 16 23:03:51 fritz user.warn kernel: [4294951703]system-load 2 76 tasks:2 % curr:status.cgi(0 %) max:status.cgi(0 %, pid:5073), readytorun: 2, pgfault 1131/s (max 1 avg 1.0)
    May 16 23:03:51 fritz user.info kernel: /proc/tffs: info request: success
    May 16 23:03:51 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    May 16 23:03:51 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    May 16 23:03:51 fritz user.warn kernel: [4294953013]system-load 6 75 tasks:4 % curr:klogd(1 %) max:service(1 %, pid:5963), readytorun: 2, pgfault 6264/s (max 1 avg 1.0)
    May 16 23:03:51 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    May 16 21:03:52 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1722(0x0) sid 0x1b ok: 0 (took 0.003 seconds)
    May 16 21:03:52 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
    May 16 21:03:52 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1837(0x0) sid 0x1b ok: 0 (took 0.001 seconds)
    May 16 21:03:53 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds)
    May 16 21:03:53 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
    May 16 21:03:53 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1834(0x0) sid 0x1b ok: 0 (took 0.001 seconds)
    May 16 21:03:53 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 1, ident: 0) no key
    May 16 21:03:53 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1861(0x0) sid 0x1b ok: 0 (took 0.001 seconds)
    May 16 21:03:54 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds)
    May 16 21:03:54 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1722(0x0) sid 0x1b ok: 0 (took 0.000 seconds)
    May 16 21:03:54 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
    May 16 21:03:54 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1837(0x0) sid 0x1b ok: 0 (took 0.001 seconds)
    May 16 21:03:55 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds)
    May 16 21:03:55 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 1, ident: 0) no key
    May 16 21:03:55 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1834(0x0) sid 0x1b ok: 0 (took 0.001 seconds)
    May 16 21:03:55 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
    May 16 21:03:55 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1861(0x0) sid 0x1b ok: 0 (took 0.001 seconds)
    May 16 21:03:56 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds)
    May 16 21:03:56 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1722(0x0) sid 0x1b ok: 0 (took 0.000 seconds)
    May 16 21:03:57 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
    May 16 21:03:57 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1837(0x0) sid 0x1b ok: 0 (took 0.001 seconds)
    May 16 21:03:57 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds)
    May 16 21:03:57 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 1, ident: 0) no key
    May 16 21:03:57 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1834(0x0) sid 0x1b ok: 0 (took 0.001 seconds)
    May 16 21:03:58 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
    May 16 21:03:58 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1861(0x0) sid 0x1b ok: 0 (took 0.001 seconds)
    May 16 21:04:03 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds)
    May 16 21:04:04 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1722(0x0) sid 0x1b ok: 0 (took 0.000 seconds)
    May 16 21:04:04 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
    May 16 21:04:04 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1837(0x0) sid 0x1b ok: 0 (took 0.001 seconds)
    May 16 23:04:04 fritz user.warn kernel: [4294954294]system-load 4 78 tasks:3 % curr:conf(0 %) max:conf(1 %, pid:6273), readytorun: 1, pgfault 3064/s (max 1 avg 1.0)
    May 16 21:04:04 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds)
    May 16 21:04:05 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
    May 16 21:04:05 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1834(0x0) sid 0x1b ok: 0 (took 0.001 seconds)
    May 16 21:04:05 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
    May 16 21:04:05 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1861(0x0) sid 0x1b ok: 0 (took 0.026 seconds)
    May 16 21:04:05 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds)
    May 16 21:04:06 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1722(0x0) sid 0x1b ok: 0 (took 0.000 seconds)
    May 16 21:04:06 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
    May 16 21:04:06 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1837(0x0) sid 0x1b ok: 0 (took 0.001 seconds)
    May 16 21:04:07 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds)
    May 16 21:04:07 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
    May 16 21:04:07 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1834(0x0) sid 0x1b ok: 0 (took 0.001 seconds)
    May 16 21:04:07 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
    May 16 21:04:07 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1861(0x0) sid 0x1b ok: 0 (took 0.001 seconds)
    May 16 21:04:08 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds)
    May 16 21:04:08 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1722(0x0) sid 0x1b ok: 0 (took 0.000 seconds)
    May 16 21:04:08 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
    May 16 21:04:08 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1837(0x0) sid 0x1b ok: 0 (took 0.001 seconds)
    May 16 23:04:08 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200
    May 16 23:04:09 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200

    May 16 21:04:09 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x1b ok: 0 (took 0.000 seconds)
    May 16 21:04:09 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
    May 16 21:04:09 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1834(0x0) sid 0x1b ok: 0 (took 0.002 seconds)
    May 16 21:04:09 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
    May 16 21:04:09 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1861(0x0) sid 0x1b ok: 0 (took 0.001 seconds)
    auch hier sind die Einträge die mich stutzig machen drin. Ich sehe aber auch gar nuícht dass der Kartenleser angesprochen wird, die LED´s bleiben durchgehend aus?!
     
    Zuletzt bearbeitet: 16. Mai 2012
    #3
  5. Barbar67
    Offline

    Barbar67 Ist gelegentlich hier

    Registriert:
    10. Oktober 2008
    Beiträge:
    80
    Zustimmungen:
    28
    Punkte für Erfolge:
    18
    Beruf:
    Auftragskiller
    Ort:
    Planet Erde
    Das ist meine cccam.cfg mit S01 ging mit jeder fritz_freetz(unter chroot ccam2.2.1).Ab und an hab ich auch smargos getestet,deshalb die einträge.Ich hab jetzt 05.21 drauf und hier geht kein cccam, hab jetzt auf oscam umgestellt

    F: barbar 987654321

    SOFTKEY FILE : /var/etc/SoftCam.Key
    AUTOROLL FILE : /var/etc/AutoRoll.Key
    STATIC CW FILE : /var/etc/constant.cw
    CAID PRIO FILE : /var/etc/CCcam.prio
    PROVIDERINFO FILE : /var/etc/CCcam.providers
    CHANNELINFO FILE : /var/etc/CCcam.channelinfo
    CCcam Log : /var/etc/cccamlog.txt
    #LOG WARNINGS : /var/etc/warnings.txt



    #### Smargo+/Phoenix Einstellungen (Cardreader) ##########
    SERIAL READER: /dev/ttyUSB0
    SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000
    #SERIAL READER: /dev/ttyUSB0 smartreader+
    TRY ALL CHIDS: /dev/ttyUSB0
    #EMM Blocker : no
    #DISABLE EMM : yes
    #EXTRA EMM LEVEL : yes
    #######################################



    SERVER LISTEN PORT : 12000
    ALLOW TELNETINFO : yes
    ALLOW WEBINFO : yes
    WEBINFO USERNAME : xxxxxx
    WEBINFO PASSWORD : xxxxxx
    TELNETINFO USERNAME : xxxxxx
    TELNETINFO PASSWORD : xxxxxx
    TELNETINFO LISTEN PORT : 16000
    WEBINFO LISTEN PORT : 16001
    SHOW TIMING : yes
    DEBUG : yes
    #MINIMUM CLIENT VERSION : 2.0.11
    #MINIMUM DOWNHOPS: 1
     
    Zuletzt von einem Moderator bearbeitet: 17. Mai 2012
    #4
  6. funnymaus
    Offline

    funnymaus Ist gelegentlich hier

    Registriert:
    2. April 2011
    Beiträge:
    40
    Zustimmungen:
    2
    Punkte für Erfolge:
    8
    Ich Danke dir für deine Mühe, aber es klappt leider immer noch nicht (ganz), immerhin ist das Syslog nun aber anders und die Karte wird wohl erkannt, kann aber nicht entschlüsselt werden (wenn ich das richtig verstehe). Ich habe deine Config wie folgt verwendet:
    F: TONI xxxxxxxx 0 1 1 { 0:0:1 }
    F: TONI_2 xxxxxxxxx 0 1 1 { 0:0:1 }
    F: Guido xxxxxxxx 0 1 1 { 0:0:1 }
    #F: thomas xxxxxx 0 1 1 { 0:0:1 }

    SERIAL READER : /dev/ttyUSB0 phoenix
    SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000


    SOFTKEY FILE : /var/etc/SoftCam.Key
    AUTOROLL FILE : /var/etc/AutoRoll.Key
    STATIC CW FILE : /var/etc/constant.cw
    CAID PRIO FILE : /var/etc/CCcam.prio
    PROVIDERINFO FILE : /var/etc/CCcam.providers
    CHANNELINFO FILE : /var/etc/CCcam.channelinfo
    CCcam Log : /var/etc/cccamlog.txt
    #LOG WARNINGS : /var/etc/warnings.txt



    #### Smargo+/Phoenix Einstellungen (Cardreader) ##########
    SERIAL READER: /dev/ttyUSB0
    SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000
    #SERIAL READER: /dev/ttyUSB0 smartreader+
    TRY ALL CHIDS: /dev/ttyUSB0
    #EMM Blocker : no
    #DISABLE EMM : yes
    #EXTRA EMM LEVEL : yes
    #######################################



    SERVER LISTEN PORT : 12000
    ALLOW TELNETINFO : yes
    ALLOW WEBINFO : yes
    WEBINFO USERNAME : name
    WEBINFO PASSWORD : pass
    TELNETINFO USERNAME : test
    TELNETINFO PASSWORD : test
    TELNETINFO LISTEN PORT : 16000
    WEBINFO LISTEN PORT : 16001
    SHOW TIMING : yes
    DEBUG : yes
    #MINIMUM CLIENT VERSION : 2.0.11
    #MINIMUM DOWNHOPS: 1


    ich habe nur das Phoenix wieder hinter den Kartenleser gesetzt da es ohne auch nicht ging.

    Syslog:
    May 17 00:39:09 fritz user.warn kernel: [dsl_ur8] dsl serial number successfully set to "303031463346354135323743204621426f783732373020353 42e30352e303500"
    May 17 00:39:09 fritz user.warn kernel: eth: port 0 status 2 throttle 0
    May 17 00:39:09 fritz user.warn kernel: eth: port 1 status 1 throttle 1
    May 17 00:39:09 fritz user.warn kernel: eth: port 2 status 1 throttle 1
    May 17 00:39:09 fritz user.warn kernel: [dsl_ur8] dsl serial number successfully set to "303031463346354135323743204621426f783732373020353 42e30352e303500"
    May 17 00:39:09 fritz user.warn kernel: dect_uicp_from_dect, ignore 16 bytes, dect_manager not up: %B
    May 17 00:39:09 fritz user.warn kernel: [4294942491]system-load 100 % 51 tasks:36 % curr:rc.wlan(0 %) max:ctlmgr(26 %, pid:1112), readytorun: 2, pgfault 5054/s (max 2 avg 1.0)
    May 17 00:39:09 fritz user.info kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    May 17 00:39:09 fritz user.info kernel: lan: port 1(eth0) entering forwarding state
    May 17 00:39:09 fritz user.warn kernel: dect_uicp_from_dect, ignore 16 bytes, dect_manager not up: %B
    May 17 00:39:09 fritz user.warn kernel: [dsl_ur8] ioctl set inventory invoked
    May 17 00:39:09 fritz user.warn kernel: [dsl_ur8] dsl serial number successfully set to "303031463346354135323743204621426f783732373020353 42e30352e303500"
    May 17 00:39:09 fritz user.info kernel: [wlan_eeprom] calibration data blocks found = 1
    May 17 00:39:09 fritz user.info kernel: [wlan_eeprom] Got calibration data version 2 for instance #1
    May 17 00:39:09 fritz user.info kernel: [wlan_eeprom] Loading "/lib/modules/wlan_eeprom_hw0.bin"
    May 17 00:39:09 fritz user.info kernel: [wlan_eeprom] Patching calibration data into eeprom
    May 17 00:39:09 fritz user.info kernel: [wlan_eeprom] Patching MAC address to 00:1f:3f:14:9f:54
    May 17 00:39:09 fritz user.info kernel: [wlan_eeprom] Customer data="7270_V5B25_Dualband"
    May 16 22:39:09 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1722(0x0) sid 0x203 ok: 0 (took 0.000 seconds)
    May 17 00:39:09 fritz user.info kernel: wlanfw: Init.
    May 17 00:39:09 fritz user.info kernel: avm_wlan_memory: Init.
    May 17 00:39:09 fritz user.info kernel: ath_hal: 0.9.14.25 (AR5416, REGOPS_FUNC)
    May 17 00:39:09 fritz user.info kernel: ath_dfs: Version 2.0.0
    May 17 00:39:09 fritz user.info kernel: Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
    May 17 00:39:09 fritz user.info kernel: wlan: 0.8.4.2 (Atheros/multi-bss)
    May 17 00:39:09 fritz user.info kernel: Registered for AVM event source.
    May 17 00:39:09 fritz user.info kernel: ath_rate_atheros: Version 2.0.1
    May 17 00:39:09 fritz user.info kernel: Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved
    May 17 00:39:09 fritz user.info kernel: ath_spectral: Version 2.0.0
    May 17 00:39:09 fritz user.info kernel: Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
    May 17 00:39:09 fritz user.warn kernel: dect_uicp_from_dect, ignore 16 bytes, dect_manager not up: %B
    May 17 00:39:09 fritz user.info kernel: ath_pci: 0.9.4.5 (Atheros/multi-bss)
    May 17 00:39:09 fritz user.info kernel: ath_pci: CR-LSDK-1.3.1.146
    May 17 00:39:09 fritz user.err kernel: cache line size: 16
    May 17 00:39:09 fritz user.info kernel: No MBSSID aggregation supportChan Freq RegPwr HT CTL CTL_U CTL_L DFS
    May 17 00:39:09 fritz user.warn kernel: 1 2412n 20 HT20 1 0 1 N
    May 17 00:39:09 fritz user.warn kernel: 2 2417n 20 HT20 1 0 1 N
    May 17 00:39:09 fritz user.warn kernel: 3 2422n 20 HT40 1 0 1 N
    May 17 00:39:09 fritz user.warn kernel: 4 2427n 20 HT40 1 0 1 N
    May 17 00:39:09 fritz user.warn kernel: 5 2432n 20 HT40 1 1 1 N
    May 17 00:39:09 fritz user.warn kernel: 6 2437n 20 HT40 1 1 1 N
    May 17 00:39:09 fritz user.warn kernel: 7 2442n 20 HT40 1 1 1 N
    May 17 00:39:09 fritz user.warn kernel: 8 2447n 20 HT40 1 1 1 N
    May 17 00:39:09 fritz user.warn kernel: 9 2452n 20 HT40 1 1 1 N
    May 17 00:39:09 fritz user.warn kernel: 10 2457n 20 HT40 1 1 0 N
    May 17 00:39:09 fritz user.warn kernel: 11 2462n 20 HT40 1 1 0 N
    May 17 00:39:09 fritz user.warn kernel: 12 2467n 20 HT20 1 1 0 N
    May 17 00:39:09 fritz user.warn kernel: 13 2472n 20 HT20 1 1 0 N
    May 17 00:39:09 fritz user.warn kernel: 108 5540n 27 HT20 1 0 1 Y
    May 17 00:39:09 fritz user.warn kernel: 110 5550n 27 HT40 1 0 0 Y
    May 17 00:39:09 fritz user.warn kernel: 112 5560n 27 HT20 1 1 0 Y
    May 17 00:39:09 fritz user.warn kernel: 116 5580n 27 HT20 1 0 1 Y
    May 17 00:39:09 fritz user.warn kernel: 118 5590n 27 HT40 1 0 0 Y
    May 17 00:39:09 fritz user.warn kernel: 120 5600n 27 HT20 1 1 0 Y
    May 17 00:39:09 fritz user.warn kernel: 124 5620n 27 HT20 1 0 1 Y
    May 17 00:39:09 fritz user.warn kernel: 126 5630n 27 HT40 1 0 0 Y
    May 17 00:39:09 fritz user.warn kernel: 128 5640n 27 HT20 1 1 0 Y
    May 17 00:39:09 fritz user.warn kernel: 132 5660n 27 HT20 1 0 1 Y
    May 17 00:39:09 fritz user.warn kernel: 134 5670n 27 HT40 1 0 0 Y
    May 17 00:39:09 fritz user.warn kernel: 136 5680n 27 HT20 1 1 0 Y
    May 17 00:39:09 fritz user.warn kernel: 140 5700n 27 HT20 1 0 0 Y
    May 17 00:39:09 fritz user.debug kernel: get_wlan_memory: (Rx) dd->dd_desc: b7fa3000, dd->dd_desc_paddr: 17fa3000, dd->dd_desc_len: 9000, *bf: 97fad000
    May 17 00:39:09 fritz user.debug kernel: get_wlan_memory: (Tx) dd->dd_desc: b7f60000, dd->dd_desc_paddr: 17f60000, dd->dd_desc_len: 23280, *bf: 97f84000
    May 17 00:39:09 fritz user.err kernel: ath_descdma_setup: beacon DMA map: b6f82000 (1152) -> physical 16f82000 (1152)
    May 17 00:39:09 fritz user.warn kernel: dfs_init_radar_filters: dfs->dfs_rinfo.rn_numradars: 0
    May 17 00:39:09 fritz user.warn kernel: DFS min filter rssiThresh = 21
    May 17 00:39:09 fritz user.warn kernel: DFS max pulse dur = 131 ticks
    May 17 00:39:09 fritz user.err kernel: wifi%d: spectral scan functionality not supported
    May 17 00:39:09 fritz user.warn kernel: ic_chainmask=7x7
    May 17 00:39:09 fritz user.warn kernel: wifi0: 11na rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
    May 17 00:39:09 fritz user.warn kernel: wifi0: 11na MCS: 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
    May 17 00:39:09 fritz user.warn kernel: wifi0: 11ng rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
    May 17 00:39:09 fritz user.warn kernel: wifi0: 11ng MCS: 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
    May 17 00:39:09 fritz user.warn kernel: wifi0: mac 13.2 phy 8.1 radio 12.0
    May 17 00:39:09 fritz user.warn kernel: wifi0: Use hw queue 1 for WME_AC_BE traffic
    May 17 00:39:09 fritz user.warn kernel: wifi0: Use hw queue 0 for WME_AC_BK traffic
    May 17 00:39:09 fritz user.warn kernel: wifi0: Use hw queue 2 for WME_AC_VI traffic
    May 17 00:39:09 fritz user.warn kernel: wifi0: Use hw queue 3 for WME_AC_VO traffic
    May 17 00:39:09 fritz user.warn kernel: wifi0: Use hw queue 8 for CAB traffic
    May 17 00:39:09 fritz user.warn kernel: wifi0: Use hw queue 9 for beacons
    May 17 00:39:09 fritz user.warn kernel: wifi0: Use hw queue 7 for UAPSD
    May 17 00:39:09 fritz user.info kernel: avm_net_trace: New net trace device 'HW (2.4 + 5 GHz, wifi0)' registered with minor 128.
    May 17 00:39:09 fritz user.info kernel: wifi0: Atheros 5416 PCI: mem=0x40000000, irq=80 hw_base=0xc0180000
    May 17 00:39:09 fritz user.warn kernel: [4294943559]system-load 100 % 54 tasks:17 % curr:busybox(0 %) max:upnpd(8 %, pid:1130), readytorun: 1, pgfault 5880/s (max 2 avg 1.0)
    May 17 00:39:09 fritz user.info kernel: wlan: mac acl policy registered
    May 17 00:39:09 fritz user.info kernel: avm_net_trace: New net trace device 'AP (2.4 + 5 GHz, ath0)' registered with minor 130.
    May 17 00:39:09 fritz user.info kernel: avm_net_trace: New net trace device 'AP (2.4 + 5 GHz, ath0)' registered with minor 131.
    May 17 00:39:09 fritz user.warn kernel: dect_uicp_from_dect, ignore 16 bytes, dect_manager not up: %B
    May 17 00:39:09 fritz user.info kernel: device ath0 entered promiscuous mode
    May 17 00:39:09 fritz user.info kernel: lan: port 2(ath0) entering forwarding state
    May 17 00:39:09 fritz user.warn kernel: [dsl_ur8] ioctl set inventory invoked
    May 17 00:39:09 fritz user.warn kernel: [dsl_ur8] dsl serial number successfully set to "303031463346354135323743204621426f783732373020353 42e30352e303500"
    May 17 00:39:09 fritz user.warn kernel: [dsl_ur8] ioctl set inventory invoked
    May 17 00:39:09 fritz user.warn kernel: [dsl_ur8] dsl serial number successfully set to "303031463346354135323743204621426f783732373020353 42e30352e303500"
    May 17 00:39:09 fritz user.warn kernel: dect_uicp_from_dect, ignore 16 bytes, dect_manager not up: %B
    May 17 00:39:09 fritz user.warn kernel: [4294944561]system-load 100 % 62 tasks:18 % curr:busybox(0 %) max:hostapd(5 %, pid:2163), readytorun: 2, pgfault 5327/s (max 2 avg 1.0)
    May 17 00:39:09 fritz user.err kernel: [dsl_ur8] DSL in Sync
    May 17 00:39:09 fritz user.warn kernel: [dsl_ur8] dslhal_support_processMailBox: Received DSP_ATM_TC_SYNC at 4294944882
    May 17 00:39:09 fritz user.err kernel: [dsl_ur8] ATM TC in Sync
    May 17 00:39:09 fritz user.warn kernel: dect_uicp_from_dect, ignore 16 bytes, dect_manager not up: %B
    May 17 00:39:09 fritz user.warn kernel: [dsl_ur8] activating vpi=1 vci=35
    May 17 00:39:09 fritz user.warn kernel: [dsl_ur8] DDC_cpsarChOpen done:0: Ch=0, Dir=RX
    May 17 00:39:09 fritz user.warn kernel: [dsl_ur8] DDC_cpsarChOpen done:0: Ch=0, Dir=TX
    May 17 00:39:09 fritz user.warn kernel: [dsl_ur8] Successfully opened vpi=1 vci=35 chan=0
    May 17 00:39:09 fritz user.warn kernel: [dsl_ur8] activating vpi=1 vci=32
    May 17 00:39:09 fritz user.warn kernel: [dsl_ur8] DDC_cpsarChOpen done:0: Ch=1, Dir=RX
    May 17 00:39:09 fritz user.warn kernel: [dsl_ur8] DDC_cpsarChOpen done:0: Ch=1, Dir=TX
    May 17 00:39:09 fritz user.warn kernel: [dsl_ur8] Successfully opened vpi=1 vci=32 chan=1
    May 17 00:39:09 fritz user.warn kernel: [4294948486]system-load 100 % 74 tasks:64 % curr:busybox(0 %) max:cccam(62 %, pid:3759), readytorun: 2, pgfault 3730/s (max 1 avg 1.0)
    May 17 00:39:09 fritz user.warn kernel: [4294949487]system-load 100 % 81 tasks:42 % curr:modreg(0 %) max:cccam(33 %, pid:3759), readytorun: 5, pgfault 6486/s (max 4 avg 1.0)
    May 17 00:39:09 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200
    May 16 22:39:09 fritz daemon.debug CCcam: card init fail
    May 16 22:39:09 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
    May 16 22:39:09 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1834(0x0) sid 0x203 ok: 0 (took 0.001 seconds)
    May 16 22:39:10 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 1, ident: 0) no key
    May 16 22:39:10 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1861(0x0) sid 0x203 ok: 0 (took 0.001 seconds)
    May 16 22:39:10 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x203 ok: 0 (took 0.000 seconds)
    May 16 22:39:11 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x203 ok: 0 (took 0.000 seconds)
    May 16 22:39:11 fritz daemon.debug CCcam: /dev/ttyUSB0 configured clock frequency: 6000000 Hz
    May 16 22:39:11 fritz daemon.debug CCcam: calculated EGT: 0 us
    May 16 22:39:11 fritz daemon.debug CCcam: irdeto card found
    May 16 22:39:11 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1722(0x0) sid 0x203 ok: 0 (took 0.000 seconds)
    May 16 22:39:11 fritz daemon.debug CCcam: drecrypt card found
    May 16 22:39:11 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
    May 16 22:39:11 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1834(0x0) sid 0x203 ok: 0 (took 0.001 seconds)
    May 16 22:39:12 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
    May 16 22:39:12 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1861(0x0) sid 0x203 ok: 0 (took 0.001 seconds)
    May 16 22:39:14 fritz daemon.debug CCcam: card init fail
    May 16 22:39:16 fritz daemon.debug CCcam: /dev/ttyUSB0 configured clock frequency: 6000000 Hz
    May 16 22:39:16 fritz daemon.debug CCcam: calculated EGT: 0 us
    May 16 22:39:16 fritz daemon.debug CCcam: irdeto card found
    May 16 22:39:16 fritz daemon.debug CCcam: drecrypt card found

    May 16 22:39:18 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x203 ok: 0 (took 0.000 seconds)
    May 16 22:39:19 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x203 ok: 0 (took 0.000 seconds)
    May 16 22:39:19 fritz daemon.debug CCcam: card init fail
    May 16 22:39:19 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1722(0x0) sid 0x203 ok: 0 (took 0.000 seconds)
    May 16 22:39:20 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
    May 16 22:39:20 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1834(0x0) sid 0x203 ok: 0 (took 0.001 seconds)
    May 16 22:39:20 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 1, ident: 0) no key
    May 16 22:39:20 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1861(0x0) sid 0x203 ok: 0 (took 0.001 seconds)
    May 16 22:39:20 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x203 ok: 0 (took 0.000 seconds)
    May 17 00:39:20 fritz user.warn kernel: [19543]system-load 4 78 tasks:4 % curr:conf(1 %) max:conf(1 %, pid:6496), readytorun: 2, pgfault 3340/s (max 1 avg 1.0)
    May 16 22:39:20 fritz daemon.debug CCcam: /dev/ttyUSB0 configured clock frequency: 6000000 Hz
    May 16 22:39:20 fritz daemon.debug CCcam: calculated EGT: 0 us
    May 16 22:39:20 fritz daemon.debug CCcam: irdeto card found
    May 16 22:39:21 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x203 ok: 0 (took 0.000 seconds)
    May 16 22:39:21 fritz daemon.debug CCcam: drecrypt card found

    May 16 22:39:21 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1722(0x0) sid 0x203 ok: 0 (took 0.000 seconds)
    May 16 22:39:22 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
    May 16 22:39:22 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1834(0x0) sid 0x203 ok: 0 (took 0.001 seconds)
    May 16 22:39:22 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 1, ident: 0) no key
    May 16 22:39:22 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1861(0x0) sid 0x203 ok: 0 (took 0.001 seconds)
    May 16 22:39:22 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x203 ok: 0 (took 0.000 seconds)
    May 16 22:39:23 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x203 ok: 0 (took 0.000 seconds)
    May 16 22:39:23 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1722(0x0) sid 0x203 ok: 0 (took 0.000 seconds)
    May 16 22:39:24 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
    May 16 22:39:24 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1834(0x0) sid 0x203 ok: 0 (took 0.001 seconds)
    May 16 22:39:24 fritz daemon.debug CCcam: nagra2 emu can't decode ecm (key: 1, ident: 0) no key
    May 16 22:39:24 fritz daemon.debug CCcam: client TONI ecm request for handler 0x7 0x1861(0x0) sid 0x203 ok: 0 (took 0.001 seconds)
    May 16 22:39:24 fritz daemon.debug CCcam: card init fail
    May 16 22:39:25 fritz daemon.debug CCcam: /dev/ttyUSB0 configured clock frequency: 6000000 Hz
    May 16 22:39:25 fritz daemon.debug CCcam: calculated EGT: 0 us
    May 16 22:39:25 fritz daemon.debug CCcam: irdeto card found
    May 16 22:39:26 fritz daemon.debug CCcam: drecrypt card found
    May 16 22:39:29 fritz daemon.debug CCcam: card init fail

    May 16 22:39:29 fritz daemon.debug CCcam: client TONI ecm request for handler 0x4 0x1702(0x0) sid 0x203 ok: 0 (took 0.000 seconds)

    Uuuups,hatte die Nacht vergessen die Antwort hier zu posten - ist ja auch wieder spät geworden nämlich 02:45Uhr. Habe immer wieder die Einstellungen geändert, die Box neu gestartet und das Syslog mit der anderen Box mit der alten 04.88 Version verglichen. Obwohl es da eigentlich nichts zu vergleichen gibt, die ist nämlich nur ein paar Zeilen lang und völlig anders vom Inhalt her. Mittlerweile sihet das Syslog wieder so aus wie im ersten Postund ich bin mir sicher die Karte wird nicht angesprochen, LED´s bleiben durchgehend aus. So langsam glaube ich nicht mehr daran dass ich die Box mit der 05.05 Version ans laufen kriegen werde :emoticon-0106-cryin
     
    #5
  7. Barbar67
    Offline

    Barbar67 Ist gelegentlich hier

    Registriert:
    10. Oktober 2008
    Beiträge:
    80
    Zustimmungen:
    28
    Punkte für Erfolge:
    18
    Beruf:
    Auftragskiller
    Ort:
    Planet Erde
    Lösche erstmal SERIAL READER : /dev/ttyUSB0 phoenix und SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000,du hast das jetzt 2 mal drinn und phoenix dahinter brauchst du da wirklich nicht. Holt die Karte raus und schiebe sie ganz langsam wieder rein bis die erkannt wird.Ich habe auch von 04.88 auf 05.05 geflasht (mit recovery versteht sich) und musste nur phoenix weg machen,erst dann wurde meine Karte erkannt.

    MfG.
     
    Zuletzt bearbeitet: 17. Mai 2012
    #6
  8. rolu2
    Offline

    rolu2 Moderator Digital Eliteboard Team

    Registriert:
    16. November 2009
    Beiträge:
    6.332
    Zustimmungen:
    3.912
    Punkte für Erfolge:
    113
    Zeig uns mal den Inhalt von freetz-Info. Mach da mal ein bild von und lad es hoch
     
    #7
  9. funnymaus
    Offline

    funnymaus Ist gelegentlich hier

    Registriert:
    2. April 2011
    Beiträge:
    40
    Zustimmungen:
    2
    Punkte für Erfolge:
    8
    Hi Barbar67,
    beim 2. Eintrag habe ich übersehen dass keine Rauten davor sind. Habe aber heute morgen um 08:45Uhr wieder angefangen und bis 18:00Uhr wieder mal durchgehend an der Box gearbeitet. Habe zwischenzeitlich testweise einfach mal eine Nachtfalke 04.88freetz-devel-6540M draufgeworfen um zu sehen ob es damit klappt und siehe da, keine halbe Stunde später lief sie wie sie sollte?! Habe da folgende Einstellung benutzt:
    F: TONI xxxxx 0 1 1 { 0:0:1 }
    F: TONI_2 xxxxxxxx 0 1 1 { 0:0:1 }
    F: Guido xxxxxxxx 0 1 1 { 0:0:1 }
    #F: thomas test 0 1 1 { 0:0:1 }
    SERVER LISTEN PORT : 12000

    ALLOW WEBINFO: yes
    SHOW EXTENEDED CLIENT INFO : yes
    WEBINFO LISTEN PORT : 16001
    WEBINFO USERNAME : name
    WEBINFO PASSWORD : pass
    #ALLOW TELNETINFO: yes
    #TELNETINFO LISTEN PORT : 16000
    #TELNETINFO USERNAME : cccam
    #TELNETINFO PASSWORD : cccam
    SERIAL READER : /dev/ttyUSB0 phoenix
    EMM Blocker : no
    DISABLE EMM : yes
    EXTRA EMM LEVEL : yes
    SHOW TIMING : yes
    DEBUG : yes


    #SOFTKEY FILE : /var/media/ftp/uStor01/cs/cccam/SoftCam.Key
    #AUTOROLL FILE : /var/media/ftp/uStor01/cs/cccam/AutoRoll.Key
    #STATIC CW FILE : /var/media/ftp/uStor01/cs/cccam/constant.cw
    #CAID PRIO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.prio
    #PROVIDERINFO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.providers
    #CHANNELINFO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.channelinfo
    LOG WARNINGS : /var/media/ftp/uStor01/cs/cccam/warnings.txt
    cccam Log : /var/media/ftp/uStor01/etc/CCcamlog.log
    Softkey File : /var/etc/SoftCam.Key
    Autoroll File : /var/media/ftp/uStor01/etc/AutoRoll.Key
    Static Cw File : /var/etc/Constant.Cw
    Caid Prio File : /var/etc/CCcam.Prio
    Providerinfo File : /var/etc/CCcam.providers
    Channelinfo File : /var/etc/CCcam.channelinfo

    Anschließend habe ich versucht einfach die DEB 05.05-freetz-devel-8888 drüberzubügeln, Firmware ging drauf aber die Karte wurde wieder nicht gelesen/erkannt!
    Habe dann wieder Recovery Image draufgemacht und eine saubere Neuinstallation mit der selben CCcam Config versucht, wieder ohne Erfolg. Es war jedesmal das selbe, die Karte wurde nicht erkannt, bzw. wurde gar nicht angesprochen. Habe es mit und ohne Phoenix Eintrag probiert, mit und ohne Reader Frequenz. Habe ständig die Box komplett neu gestartet damit die Einstellungen auch sicher übernommen wurden, es hat nichts geholfen.
    Ich habe deine Config probiert, nichts half, es war einfach zum verzweifeln!
    Habe dann Nachtfalkes

    Dieser Link ist nur für Mitglieder!!! Jetzt kostenlos Registrieren ?

    versucht, komplett wieder Recovery etc, da ging die selbe Config auch nicht, weder mit dem Stick der funktionierenden 04.88freetz-devel-6540M, noch mit einem eigens dafür genommen nagelneuem Stick. Habe den Stick auch sicherheitshalber vorher schon ext2 formatiert, dann noch mal über die Toolbox, es half alles nichts. CCcam startet, aber die Karte wurde einfach nicht erkannt.
    Ich habe zu guter Letzt nach neuerlichem Recovery Image die 04.88freetz-devel-6540M[Toolbox_Camd3] vom Nachtfalken draufgemacht, mit der Konsequenz dass ich die "Export" Datei von der 05.05-freetz-devel-8888 nicht einlesen konnte (höhere Version) und mir die Zugangsdaten und sämtliche Einstellungen mühselig zusammensuchen mußte, prima wenn das Internet mit dieser Box ja nicht geht! Zum Glück habe ich ja noch die 7270 V3 und die läuft ja nun mit dem DEB 04.88freetz-devel-7014M Image prima, konnte da vieles auslesen, bzw. damit das Internet nutzen.
    Also egal welche Version von der 05.05 ich versucht habe damit läuft es bei mir nicht?! Nach 2,5 Tage von nur wenig Schlaf unterbrochen habe ich erst mal genug........
    Meine Erstazbox liegt jetzt fertig eingerichtet mit dem passenden Stick zusammen auf dem Regal und wartet auf den "Notfall"
    Ich habe allerdings noch eine "defekte" 7270 V1 hier liegen die ständig rebootet und sich seinerzeits auch durch etliche Versuche (und ich meine wirklich etliche!!!) mit dem Recovery Image nicht hat davon abbringen lassen, evtl. begebe ich mich noch mal daran. Oder ich hänge die Notfallbox ans Netz und beginne noch mal mit der 7270 V3 die ja auch nicht mit dem 05.05 Image die Karte lesen/erkennen wollte?
    Auf jeden Fall Danke für die Mühe und Geduld.
     
    #8
  10. funnymaus
    Offline

    funnymaus Ist gelegentlich hier

    Registriert:
    2. April 2011
    Beiträge:
    40
    Zustimmungen:
    2
    Punkte für Erfolge:
    8
    Danke rolu2, aber mittlerweile habe ich die Box (besser sie mich!) fertig gemacht, wenn auch mit einem alten Image, aber das läuft wenigstens problemlos.
     
    #9
  11. Barbar67
    Offline

    Barbar67 Ist gelegentlich hier

    Registriert:
    10. Oktober 2008
    Beiträge:
    80
    Zustimmungen:
    28
    Punkte für Erfolge:
    18
    Beruf:
    Auftragskiller
    Ort:
    Planet Erde
    An deiner stelle würde ich die 05.05 auslassen (gibts immer problemme mit z.B. DynDNS) und ein freetz mit 05.21 nehmen und auf OScam umsteigen.Läuft einfach besser(bessere Antwortzeiten usw.).USB-Stick immer im Toolbox formatieren/einrichten(Anleitung in pdf kannst du auch von mir kriegen,wie auch cfgs für Oscam ,da wir gleiche Hardware haben).Die Receiver kannst du mit cccam weiter laufen lassen.

    MfG.
     
    #10
  12. rolu2
    Offline

    rolu2 Moderator Digital Eliteboard Team

    Registriert:
    16. November 2009
    Beiträge:
    6.332
    Zustimmungen:
    3.912
    Punkte für Erfolge:
    113
    Schau mal nach, ob da wo ich gesagt habe. Die UMTS-Funktion entfernt wurde. Ist die nicht entfernt worden kann es zu Probs bei der Easymouse kommen
     
    #11
  13. funnymaus
    Offline

    funnymaus Ist gelegentlich hier

    Registriert:
    2. April 2011
    Beiträge:
    40
    Zustimmungen:
    2
    Punkte für Erfolge:
    8
    Hi rolu2,
    eigentlich hatte ich ja nicht mehr vor die Box wieder vom Schrank zu holen und erneut dran zu werkeln, aber wenn man Hilfe angeboten bekommt und einen die Neugier treibt..........
    Zudem könnte es ja auch anderen Betroffenen helfen.

    hier ist die FreetzInfo als Textdatei:

    FREETZ_HAVE_DOT_CONFIG=y
    FREETZ_AVM_VERSION_7270_05_05=y
    FREETZ_TYPE_FON_WLAN_7270_16=y
    FREETZ_TYPE_FON_WLAN_7270_V2=y
    FREETZ_TYPE_FON_WLAN_7270=y
    FREETZ_TYPE_LANG_DE=y
    FREETZ_TYPE_LANGUAGE="de"
    FREETZ_AVM_VERSION_STRING="7270_05.05"
    FREETZ_FILESYSTEM_MTD_SIZE=0
    FREETZ_TYPE_PREFIX="7270_v2"
    FREETZ_INSTALL_BASE=y
    FREETZ_REPLACE_BUSYBOX=y
    FREETZ_SHOW_ADVANCED=y
    FREETZ_REPLACE_KERNEL_AVAILABLE=y
    FREETZ_TARGET_IPV6_SUPPORT=y
    FREETZ_TARGET_REF_16MB=y
    FREETZ_TARGET_REF="16mb"
    FREETZ_KERNEL_REF_16MB=y
    FREETZ_KERNEL_REF="16mb"
    FREETZ_KERNEL_MTD_SIZE=246
    FREETZ_HAS_AVM_AURA_USB=y
    FREETZ_HAS_AVM_MINID=y
    FREETZ_HAS_AVM_NTFS=y
    FREETZ_HAS_AVM_IPV6=y
    FREETZ_HAS_AVM_WEBDAV=y
    FREETZ_HAS_AVM_INETD=y
    FREETZ_HAS_AVM_EXT3=y
    FREETZ_HAS_AVM_TR069=y
    FREETZ_HAS_AVM_CHRONYD=y
    FREETZ_HAS_AVM_DECT=y
    FREETZ_HAS_AVM_OPENSSL_LIBS=y
    FREETZ_HAS_AVM_LSOF=y
    FREETZ_HAS_AVM_NAS=y
    FREETZ_HAS_AVM_PHONE=y
    FREETZ_HAS_AVM_STRACE=y
    FREETZ_HAS_AVM_TAM=y
    FREETZ_HAS_AVM_UDEV=y
    FREETZ_HAS_AVM_USB_HOST=y
    FREETZ_HAS_AVM_E2FSPROGS=y
    FREETZ_HAS_AVM_WLAN=y
    FREETZ_HAS_AVM_UMTS=y
    FREETZ_HAS_AVM_JFFS2=y
    FREETZ_HAS_AVM_CTLMGR_STRUCT_V1=y
    FREETZ_LANG_DE=y
    FREETZ_LANG_STRING="de"
    FREETZ_PATCH_FREETZMOUNT=y
    FREETZ_USBSTORAGE_AUTOMOUNT=y
    FREETZ_AUTOMOUNT_EXT2=y
    FREETZ_AUTOMOUNT_EXT3=y
    FREETZ_AUTOMOUNT_FAT=y
    FREETZ_AUTOMOUNT_HFS_PLUS=y
    FREETZ_AUTOMOUNT_NTFS=y
    FREETZ_PATCH_MAXDEVCOUNT=y
    FREETZ_CUSTOM_UDEV_RULES=y
    FREETZ_REMOVE_CHRONYD=y
    FREETZ_REMOVE_DTRACE=y
    FREETZ_REMOVE_UMTSD=y
    FREETZ_AVMDAEMON_DISABLE_NTP=y
    FREETZ_AVMDAEMON_DISABLE_MULTIDPORTS=y
    FREETZ_AVMDAEMON_DISABLE_DNS=y
    FREETZ_AVMDAEMON_DISABLE_DHCP=y
    FREETZ_AVMDAEMON_DISABLE_LLMNR=y
    FREETZ_PACKAGE_USBUTILS=y
    FREETZ_PACKAGE_USBUTILS_IDS=y
    FREETZ_PACKAGE_USBUTILS_IDS_UPDATE=y
    FREETZ_PACKAGE_BRIDGE_UTILS=y
    FREETZ_PACKAGE_CALLMONITOR=y
    FREETZ_PACKAGE_CALLMONITOR_webif=y
    FREETZ_PACKAGE_CALLMONITOR_actions=y
    FREETZ_PACKAGE_CALLMONITOR_monitor=y
    FREETZ_PACKAGE_CALLMONITOR_phonebook=y
    FREETZ_PACKAGE_DNSMASQ=y
    FREETZ_PACKAGE_DNSMASQ_DISABLE_DNS=y
    FREETZ_PACKAGE_DNSMASQ_DISABLE_DHCP=y
    FREETZ_PACKAGE_DROPBEAR=y
    FREETZ_PACKAGE_DROPBEAR_DISABLE_HOST_LOOKUP=y
    FREETZ_PACKAGE_HASERL=y
    FREETZ_PACKAGE_INETD=y
    FREETZ_PACKAGE_MC=y
    FREETZ_PACKAGE_MC_WITH_NCURSES=y
    FREETZ_PACKAGE_MC_WITH_EDIT=y
    FREETZ_PACKAGE_MC_WITH_SUBSHELL=y
    FREETZ_PACKAGE_MC_WITH_HELP=y
    FREETZ_PACKAGE_MC_WITH_SYNTAX=y
    FREETZ_PACKAGE_NTFS=y
    FREETZ_PACKAGE_NTFS_mkntfs=y
    FREETZ_PACKAGE_NTFS_ntfsfix=y
    FREETZ_PACKAGE_NTFS_ntfsinfo=y
    FREETZ_PACKAGE_NTFS_ntfslabel=y
    FREETZ_PACKAGE_OPENNTPD=y
    FREETZ_PACKAGE_OPENVPN=y
    FREETZ_PACKAGE_OPENVPN_WITH_LZO=y
    FREETZ_PACKAGE_OPENVPN_ENABLE_SMALL=y
    FREETZ_PACKAGE_PRIVOXY=y
    FREETZ_PACKAGE_PRIVOXY_WITH_SHARED_PCRE=y
    FREETZ_PACKAGE_SAMBA=y
    FREETZ_PACKAGE_NMBD=y
    FREETZ_SAMBA_VERSION_3_0=y
    FREETZ_PACKAGE_SAMBA_MAX_DEBUG_LEVEL=-1
    FREETZ_PACKAGE_VSFTPD=y
    FREETZ_PACKAGE_APACHE2=y
    FREETZ_PACKAGE_APACHE2_DEFLATE=y
    FREETZ_PACKAGE_APACHE2_SSL=y
    FREETZ_PACKAGE_APACHE2_COMPILEINMODS=y
    FREETZ_PACKAGE_APACHE2_STATIC=y
    FREETZ_PACKAGE_DOSFSTOOLS=y
    FREETZ_PACKAGE_DOSFSTOOLS_DOSFSCK=y
    FREETZ_PACKAGE_DOSFSTOOLS_DOSFSLABEL=y
    FREETZ_PACKAGE_DOSFSTOOLS_MKDOSFS=y
    FREETZ_PACKAGE_E2FSPROGS=y
    FREETZ_PACKAGE_E2FSPROGS_STATIC=y
    FREETZ_PACKAGE_E2FSPROGS_E2FSCK=y
    FREETZ_PACKAGE_E2FSPROGS_E2MAKING=y
    FREETZ_PACKAGE_E2FSPROGS_E2TUNING=y
    FREETZ_PACKAGE_IGMPPROXY=y
    FREETZ_PACKAGE_INADYN_MT=y
    FREETZ_PACKAGE_OPENDD=y
    FREETZ_PACKAGE_OPENDD_WITH_SSL=y
    FREETZ_PACKAGE_WGET=y
    FREETZ_PACKAGE_WGET_WITH_SSL=y
    FREETZ_PACKAGE_WGET_USE_GNUTLS=y
    FREETZ_PACKAGE_WGET_STATIC=y
    FREETZ_PACKAGE_WOL=y
    FREETZ_PACKAGE_AUTHORIZED_KEYS=y
    FREETZ_PACKAGE_AVM_FIREWALL=y
    FREETZ_PACKAGE_SYSLOGD_CGI=y
    FREETZ_PACKAGE_WOL_CGI=y
    FREETZ_PACKAGE_MOD=y
    FREETZ_PACKAGE_MOD_ETCSERVICES=y
    FREETZ_PACKAGE_MODCGI=y
    FREETZ_DL_KERNEL_SITE="@AVM/fritzbox.fon_wlan_7270_v3/x_misc/opensrc"
    FREETZ_DL_KERNEL_SOURCE="fritzbox-source-files-05.05.tar.gz"
    FREETZ_DL_KERNEL_SOURCE_MD5="19280ad861a7e88698d41211996c5ac6"
    FREETZ_DL_SITE="@AVM/fritzbox.fon_wlan_7270_v2/firmware/deutsch"
    FREETZ_DL_SOURCE="FRITZ.Box_Fon_WLAN_7270_v2.54.05.05.image"
    FREETZ_DL_SOURCE_MD5="093fa1daf5443fc876b25d6478fd8f2a"
    FREETZ_VERBOSITY_LEVEL=2
    FREETZ_SIZEINFO_COMPRESSED=y
    FREETZ_JLEVEL=2
    FREETZ_CHECK_CHANGED=y
    FREETZ_DL_SITE_USER=""
    FREETZ_OPTIONS_ETCSERVICES=y
    FREETZ_SECURITY_LEVEL=1
    FREETZ_STYLE_COLORED=y
    FREETZ_STYLE="colored"
    FREETZ_SKIN_legacy=y
    FREETZ_FAVICON_DSL123=y
    FREETZ_FAVICON_STRING="dsl123"
    FREETZ_TAGGING_NONE=y
    FREETZ_TAGGING_STRING="none"
    FREETZ_DEVELOPER_VERSION_STRING=y
    FREETZ_USER_DEFINED_COMMENT="Digital Eliteboard"
    FREETZ_CUSTOM_IMAGE_NAME=y
    FREETZ_CREATE_SEPARATE_OPTIONS_CFG=y
    FREETZ_SQUASHFS_BLOCKSIZE_65536=y
    FREETZ_SQUASHFS_BLOCKSIZE=65536
    FREETZ_KERNEL_VERSION_2_6_32=y
    FREETZ_KERNEL_VERSION_2_6_32_21=y
    FREETZ_KERNEL_VERSION="2.6.32"
    FREETZ_KERNEL_VERSION_2_6_13_MIN=y
    FREETZ_KERNEL_VERSION_2_6_19_MIN=y
    FREETZ_KERNEL_VERSION_2_6_28_MIN=y
    FREETZ_KERNEL_VERSION_2_6_32_MIN=y
    FREETZ_KERNEL_VERSION_2_6_32_MAX=y
    FREETZ_KERNEL_LAYOUT_UR8=y
    FREETZ_KERNEL_LAYOUT="ur8"
    FREETZ_MODULES_KVER="2.6.32.21"
    FREETZ_MODULE_usbserial=y
    FREETZ_MODULE_pl2303=y
    FREETZ_MODULE_ftdi_sio=y
    FREETZ_MODULE_ext2=y
    FREETZ_MODULE_hfsplus=y
    FREETZ_MODULE_fuse=y
    FREETZ_MODULE_nls_utf8=y
    FREETZ_MODULE_mbcache=y
    FREETZ_BUSYBOX_BLKID=y
    FREETZ_BUSYBOX_BLKID_TYPE=y
    FREETZ_BUSYBOX_ETHER_WAKE=y
    FREETZ_BUSYBOX_INETD=y
    FREETZ_BUSYBOX_IP=y
    FREETZ_BUSYBOX_FEATURE_IP_ADDRESS=y
    FREETZ_BUSYBOX_FEATURE_IP_LINK=y
    FREETZ_BUSYBOX_FEATURE_IP_ROUTE=y
    FREETZ_BUSYBOX_FEATURE_IP_TUNNEL=y
    FREETZ_BUSYBOX_MD5SUM=y
    FREETZ_BUSYBOX_REALPATH=y
    FREETZ_BUSYBOX_STUN_IP=y
    FREETZ_BUSYBOX_TAR_OLDGNU_COMPATIBILITY=y
    FREETZ_BUSYBOX_VOLUMEID=y
    FREETZ_BUSYBOX_VOLUMEID_EXT=y
    FREETZ_BUSYBOX_VOLUMEID_FAT=y
    FREETZ_BUSYBOX_VOLUMEID_HFS=y
    FREETZ_BUSYBOX_VOLUMEID_NTFS=y
    FREETZ_BUSYBOX_WGET=y
    FREETZ_BUSYBOX_FEATURE_PREFER_IPV4_ADDRESS=y
    FREETZ_LIB_libapr_WITH_DSO=y
    FREETZ_LIB_libcrypto=y
    FREETZ_LIB_libssl=y
    FREETZ_LIB_liblzo2=y
    FREETZ_LIB_libntfs=y
    FREETZ_LIB_libglib_2=y
    FREETZ_LIB_libncurses=y
    FREETZ_SHARE_terminfo=y
    FREETZ_SHARE_terminfo_ansi=y
    FREETZ_SHARE_terminfo_gnome=y
    FREETZ_SHARE_terminfo_konsole=y
    FREETZ_SHARE_terminfo_linux=y
    FREETZ_SHARE_terminfo_putty=y
    FREETZ_SHARE_terminfo_rxvt=y
    FREETZ_SHARE_terminfo_screen=y
    FREETZ_SHARE_terminfo_screenMINUSw=y
    FREETZ_SHARE_terminfo_sun=y
    FREETZ_SHARE_terminfo_vt100=y
    FREETZ_SHARE_terminfo_vt102=y
    FREETZ_SHARE_terminfo_vt102MINUSnsgr=y
    FREETZ_SHARE_terminfo_vt102MINUSw=y
    FREETZ_SHARE_terminfo_vt200=y
    FREETZ_SHARE_terminfo_vt220=y
    FREETZ_SHARE_terminfo_vt52=y
    FREETZ_SHARE_terminfo_xterm=y
    FREETZ_SHARE_terminfo_xtermMINUScolor=y
    FREETZ_SHARE_terminfo_xtermMINUSxfree86=y
    FREETZ_LIB_libpcre=y
    FREETZ_LIB_libpcreposix=y
    FREETZ_LIB_ld_uClibc=y
    FREETZ_LIB_libcrypt=y
    FREETZ_LIB_libdl=y
    FREETZ_LIB_libm=y
    FREETZ_LIB_libnsl=y
    FREETZ_LIB_libpthread=y
    FREETZ_LIB_libresolv=y
    FREETZ_LIB_librt=y
    FREETZ_LIB_libuClibc=y
    FREETZ_LIB_libutil=y
    FREETZ_LIB_libusb=y
    FREETZ_LIB_libusb_1=y
    FREETZ_LIB_libftdi=y
    FREETZ_LIB_libgcc_s=y
    FREETZ_LIB_libctlmgr=y
    FREETZ_LIB_libctlmgr_WITH_STRUCT_V1=y
    FREETZ_LIB_libmultid=y
    FREETZ_LIB_libmultid_WITH_ANYIP=y
    FREETZ_LIB_libmultid_WITH_DNS=y
    FREETZ_LIB_libmultid_WITH_DHCP=y
    FREETZ_LIB_libmultid_WITH_LLMNR=y
    FREETZ_LIB_libpopt=y
    FREETZ_STRIP_BINARIES=y
    FREETZ_STRIP_MODULES_FREETZ=y
    FREETZ_STRIP_SCRIPTS=y
    EXTERNAL_ENABLED=y
    EXTERNAL_LINKS=y
    EXTERNAL_SUBDIRS=y
    EXTERNAL_CREATEPAK=y
    EXTERNAL_OWN_FILES=""
    EXTERNAL_FREETZ_PACKAGE_APACHE2=y
    EXTERNAL_FREETZ_PACKAGE_IGMPPROXY=y
    EXTERNAL_FREETZ_PACKAGE_MC=y
    EXTERNAL_FREETZ_PACKAGE_WGET=y
    EXTERNAL_FREETZ_PACKAGE_WOL=y
    EXTERNAL_FREETZ_PACKAGE_OPENDD=y
    EXTERNAL_FREETZ_PACKAGE_OPENVPN=y
    EXTERNAL_FREETZ_PACKAGE_PRIVOXY=y
    EXTERNAL_FREETZ_PACKAGE_SAMBA=y
    EXTERNAL_FREETZ_PACKAGE_VSFTPD=y
    FREETZ_TARGET_ARCH_LE=y
    FREETZ_TARGET_ARCH="mipsel"
    FREETZ_TARGET_CROSS="mipsel-linux-uclibc-"
    FREETZ_TARGET_MAKE_PATH="toolchain/target/bin"
    FREETZ_KERNEL_CROSS="mipsel-unknown-linux-gnu-"
    FREETZ_KERNEL_MAKE_PATH="toolchain/kernel/bin"
    FREETZ_DOWNLOAD_TOOLCHAIN=y
    FREETZ_UCLIBC_0_9_31_BASED_BOX=y
    FREETZ_KERNEL_COMPILER_GCC_4_4=y
    FREETZ_KERNEL_GCC_VERSION="4.4.7"
    FREETZ_KERNEL_BINUTILS_VERSION="2.22"
    FREETZ_TARGET_UCLIBC_VERSION_0_9_31=y
    FREETZ_TARGET_COMPILER_GCC_4_5=y
    FREETZ_STDCXXLIB_USE_UCLIBCXX=y
    FREETZ_TARGET_UCLIBC_VERSION="0.9.31.1"
    FREETZ_TARGET_GCC_VERSION="4.5.3"
    FREETZ_GNULIBSTDCXX_VERSION="6.0.14"
    FREETZ_STDCXXLIB="uclibcxx"
    FREETZ_TARGET_BINUTILS_VERSION="2.22"
    FREETZ_TARGET_UCLIBC_REF="mod"
    FREETZ_TARGET_CFLAGS="-Os -pipe -Wa,--trap"
    FREETZ_TARGET_LFS=y
    FREETZ_TOOLCHAIN_MINIMIZE_REQUIRED_GLIBC_VERSION=y
    Habe 2 zeilen markiert in den UMTS bzw UMTSD erwähnt wird. Kannst Du damit was anfangen?

    Sooooo, habe mal in der 04.88freetz-devel-7014M nachgeschaut, dort steht nichts von UMTS drin. Sollte das der Grund sein dass diese läuft und die andere nicht und viel wichtiger kann man das irgendwie selber entfernen?
     
    Zuletzt bearbeitet: 18. Mai 2012
    #12
  14. rolu2
    Offline

    rolu2 Moderator Digital Eliteboard Team

    Registriert:
    16. November 2009
    Beiträge:
    6.332
    Zustimmungen:
    3.912
    Punkte für Erfolge:
    113
    Das FREETZ_REMOVE_UMTSD=y
    sagt aus, das die UMTS-Funktion entfernt wurde

    Hast du noch andere Image getestet?
     
    #13
  15. funnymaus
    Offline

    funnymaus Ist gelegentlich hier

    Registriert:
    2. April 2011
    Beiträge:
    40
    Zustimmungen:
    2
    Punkte für Erfolge:
    8
    wie gesagt, die gleiche Version vom Nachtfalken ging auch nicht. Hatt noch 2 andere Versionen versucht aber leider schon von der Platte gelöscht (weiß nicht mehr welche). Bei einem kam gar nicht erst das Freetz Menü unten links in der Fritz Oberfläche und bei der anderen Version ging auch die Karte nicht.

    hier mal wieder das Syslog:
    freetz-devel-8888
    Freetz – Syslog



    Status
    Dienste
    Box-Info
    Freetz-Info
    Logdateien
    Syslog
    System
    Freetz
    AVM-Dienste
    AVM-Firewall
    Callmonitor
    camd3
    CCcam
    Dnsmasq
    Dropbear
    gbox
    Inadyn-mt
    Inetd
    lcd4linux
    newcs
    OpenDD
    OpenNTPD
    OpenVPN
    oscam
    Privoxy
    Samba
    scam
    SSH
    Syslogd
    Toolbox
    Vsftpd
    Wake on LAN
    Watchdog

    Ringpuffer
    Filter:

    May 18 20:31:31 fritz user.info kernel: usb 1-1.3.3: Product: FT232R USB UART
    May 18 20:31:31 fritz user.info kernel: usb 1-1.3.3: Manufacturer: FTDI
    May 18 20:31:32 fritz user.info kernel: usb 1-1.3.3: SerialNumber: A400fREk
    May 18 20:31:32 fritz user.info kernel: usb 1-1.3.3: configuration #1 chosen from 1 choice
    May 18 20:31:32 fritz user.warn kernel: dect_uicp_from_dect, ignore 16 bytes, dect_manager not up: %B
    May 18 20:31:32 fritz user.warn kernel: [4294939434]system-load 7 36 tasks:10 % curr:modload(0 %) max:khubd(3 %, pid:11), readytorun: 1, pgfault 2944/s (max 1 avg 1.0)
    May 18 20:31:32 fritz user.info kernel: ramzswap: /dev/ramzswap0 initialized: disksize_kb=8192
    May 18 20:31:32 fritz user.info kernel: Adding 8184k swap on /dev/ramzswap0. Priority:-1 extents:1 across:8184k SS
    May 18 20:31:32 fritz user.debug kernel: usb-storage: device scan complete
    May 18 20:31:32 fritz user.notice kernel: scsi 0:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4
    May 18 20:31:32 fritz user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
    May 18 20:31:32 fritz user.notice kernel: sd 0:0:0:0: [sda] 31277056 512-byte logical blocks: (16.0 GB/14.9 GiB)
    May 18 20:31:32 fritz user.notice kernel: sd 0:0:0:0: [sda] Write Protect is off
    May 18 20:31:32 fritz user.err kernel: [dsl_ur8] shim_osLoadFWImage: Completed
    May 18 20:31:32 fritz user.err kernel: [dsl_ur8] DSP image page address: (96700000)
    May 18 20:31:32 fritz user.warn kernel: [4294940438]system-load 9 64 tasks:38 % curr:busybox(28 %) max:busybox(28 %, pid:823), readytorun: 10, pgfault 4295/s (max 2 avg 1.0)
    May 18 20:31:32 fritz user.err kernel: [dsl_ur8] PM2EMIF=06700000 DM2EMIF=06700000 at DSLSS Start Time. PM2EMIF changes when DSL DP runs
    May 18 20:31:32 fritz user.err kernel: [dsl_ur8] dslhal_support_hostDspCodeDownload: Done. Datapump version: 01.52.51.33
    May 18 20:31:32 fritz user.warn kernel: dect_uicp_from_dect, ignore 16 bytes, dect_manager not up: %B
    May 18 20:31:32 fritz user.warn kernel: [dsl_ur8] dsl serial number successfully set to "465249545a21426f78466f6e574c414e37323730093030314633463541353237"
    May 18 20:31:32 fritz user.warn kernel: [dsl_ur8] AVM Fw Version successfully set into EOC Stuct 54.05.05
    May 18 20:31:32 fritz user.err kernel: [dsl_ur8] DDC_dsl_init: Done
    May 18 20:31:32 fritz user.err kernel: [dsl_ur8] DDC_atm_init: Done priv = 96f4b800
    May 18 20:31:32 fritz user.err kernel: [dsl_ur8] DDA_atm_irq_request: SAR Interrupt registered
    May 18 20:31:32 fritz user.err kernel: [dsl_ur8] AVM Datapump
    May 18 20:31:32 fritz user.err kernel: [dsl_ur8] DDA_atm_irq_request: DSL Interrupt registered
    May 18 20:31:32 fritz user.warn kernel: [dsl_ur8] Powermanagment (States => 1,10) supported!
    May 18 20:31:32 fritz user.err kernel: [dsl_ur8] Loading Linux DSL Driver done
    May 18 18:31:32 fritz daemon.debug CCcam: card detect fail
    May 18 20:31:32 fritz user.info kernel: kdsldmod: init start (Jul 1 2011 14:38:12) sizeof(struct sk_buff)=176
    May 18 20:31:32 fritz user.info kernel: kdsldmod: init done
    May 18 20:31:32 fritz user.warn kernel: dect_uicp_from_dect, ignore 16 bytes, dect_manager not up: %B
    May 18 20:31:32 fritz user.warn kernel: EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
    May 18 20:31:32 fritz user.warn kernel: dect_uicp_from_dect, ignore 16 bytes, dect_manager not up: %B
    May 18 20:31:32 fritz user.warn kernel: [4294941438]system-load 100 % 76 tasks:11 % curr:usbcfgctl(0 %) max:ctlmgr(2 %, pid:1103), readytorun: 2, pgfault 3174/s (max 2 avg 1.0)
    May 18 20:31:32 fritz user.warn kernel: [dsl_ur8] ioctl set inventory invoked
    May 18 20:31:32 fritz user.warn kernel: [dsl_ur8] dsl serial number successfully set to "303031463346354135323743204621426f78373237302035342e30352e303500"
    May 18 20:31:32 fritz user.warn kernel: eth: port 0 status 2 throttle 0
    May 18 20:31:32 fritz user.warn kernel: eth: port 1 status 1 throttle 1
    May 18 20:31:32 fritz user.warn kernel: eth: port 2 status 1 throttle 1
    May 18 20:31:32 fritz user.warn kernel: eth: port 3 status 1 throttle 1
    May 18 20:31:32 fritz user.warn kernel: dect_uicp_from_dect, ignore 16 bytes, dect_manager not up: %B
    May 18 20:31:32 fritz user.err kernel: [cpmac] [cpphy_tantos_get_vid_group] Error! No free VLAN groups! Using 0 anyway!
    May 18 20:31:32 fritz user.err kernel: [cpmac] [cpphy_tantos_get_vid_group] Error! No free VLAN groups! Using 0 anyway!
    May 18 20:31:32 fritz user.err kernel: [cpmac] [cpphy_tantos_get_vid_group] Error! No free VLAN groups! Using 0 anyway!
    May 18 20:31:32 fritz user.info kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
    May 18 20:31:32 fritz user.info kernel: device eth0 entered promiscuous mode
    May 18 20:31:32 fritz user.info kernel: device cpmac0 entered promiscuous mode
    May 18 20:31:32 fritz user.err kernel: [dsl_ur8] hwrev=139.1.0.6 is_ATA_Ld_Hw=0
    May 18 20:31:32 fritz user.err kernel: [dsl_ur8] from DSL to ATA Mode
    May 18 20:31:32 fritz user.err kernel: [dsl_ur8] DSP in IDLE Mode
    May 18 20:31:32 fritz user.err kernel: [dsl_ur8] SARAS PWDREG = 0x8000
    May 18 20:31:32 fritz user.warn kernel: dect_uicp_from_dect, ignore 16 bytes, dect_manager not up: %B
    May 18 20:31:32 fritz user.warn kernel: [4294942475]system-load 9 54 tasks:35 % curr:rc.wlan(0 %) max:ctlmgr(24 %, pid:1103), readytorun: 4, pgfault 5001/s (max 2 avg 1.0)
    May 18 20:31:32 fritz user.info kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    May 18 20:31:32 fritz user.info kernel: lan: port 1(eth0) entering forwarding state
    May 18 20:31:32 fritz user.warn kernel: dect_uicp_from_dect, ignore 16 bytes, dect_manager not up: %B
    May 18 20:31:32 fritz user.info kernel: [wlan_eeprom] calibration data blocks found = 1
    May 18 20:31:32 fritz user.info kernel: Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved
    May 18 20:31:32 fritz user.info kernel: ath_spectral: Version 2.0.0
    May 18 20:31:32 fritz user.info kernel: Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
    May 18 20:31:32 fritz user.warn kernel: dect_uicp_from_dect, ignore 16 bytes, dect_manager not up: %B
    May 18 20:31:32 fritz user.info kernel: ath_pci: 0.9.4.5 (Atheros/multi-bss)
    May 18 20:31:32 fritz user.info kernel: ath_pci: CR-LSDK-1.3.1.146
    May 18 20:31:32 fritz user.err kernel: cache line size: 16
    May 18 20:31:32 fritz user.info kernel: No MBSSID aggregation supportChan Freq RegPwr HT CTL CTL_U CTL_L DFS
    May 18 20:31:32 fritz user.warn kernel: 1 2412n 20 HT20 1 0 1 N
    May 18 20:31:32 fritz user.warn kernel: 2 2417n 20 HT20 1 0 1 N
    May 18 20:31:32 fritz user.warn kernel: 3 2422n 20 HT40 1 0 1 N
    May 18 20:31:32 fritz user.warn kernel: 4 2427n 20 HT40 1 0 1 N
    May 18 20:31:32 fritz user.warn kernel: 5 2432n 20 HT40 1 1 1 N
    May 18 20:31:32 fritz user.warn kernel: 6 2437n 20 HT40 1 1 1 N
    May 18 20:31:32 fritz user.warn kernel: 7 2442n 20 HT40 1 1 1 N
    May 18 20:31:32 fritz user.warn kernel: 8 2447n 20 HT40 1 1 1 N
    May 18 20:31:32 fritz user.warn kernel: 9 2452n 20 HT40 1 1 1 N
    May 18 20:31:32 fritz user.warn kernel: 10 2457n 20 HT40 1 1 0 N
    May 18 20:31:32 fritz user.warn kernel: 11 2462n 20 HT40 1 1 0 N
    May 18 20:31:32 fritz user.warn kernel: 12 2467n 20 HT20 1 1 0 N
    May 18 20:31:32 fritz user.warn kernel: 13 2472n 20 HT20 1 1 0 N
    May 18 20:31:32 fritz user.warn kernel: 36 5180n 30 HT20 1 0 1 N
    May 18 20:31:32 fritz user.warn kernel: 38 5190n 20 HT40 1 0 0 N
    May 18 20:31:32 fritz user.warn kernel: 40 5200n 30 HT20 1 1 0 N
    May 18 20:31:32 fritz user.warn kernel: 44 5220n 30 HT20 1 0 1 N
    May 18 20:31:32 fritz user.warn kernel: 120 5600n 27 HT20 1 1 0 Y
    May 18 20:31:32 fritz user.warn kernel: 124 5620n 27 HT20 1 0 1 Y
    May 18 20:31:32 fritz user.warn kernel: 126 5630n 27 HT40 1 0 0 Y
    May 18 20:31:32 fritz user.warn kernel: 128 5640n 27 HT20 1 1 0 Y
    May 18 20:31:32 fritz user.warn kernel: 132 5660n 27 HT20 1 0 1 Y
    May 18 20:31:32 fritz user.warn kernel: 134 5670n 27 HT40 1 0 0 Y
    May 18 20:31:32 fritz user.warn kernel: 136 5680n 27 HT20 1 1 0 Y
    May 18 20:31:32 fritz user.warn kernel: 140 5700n 27 HT20 1 0 0 Y
    May 18 20:31:32 fritz user.debug kernel: get_wlan_memory: (Rx) dd->dd_desc: b7fa3000, dd->dd_desc_paddr: 17fa3000, dd->dd_desc_len: 9000, *bf: 97fad000
    May 18 20:31:32 fritz user.debug kernel: get_wlan_memory: (Tx) dd->dd_desc: b7f60000, dd->dd_desc_paddr: 17f60000, dd->dd_desc_len: 23280, *bf: 97f84000
    May 18 20:31:32 fritz user.err kernel: ath_descdma_setup: beacon DMA map: b6ef9000 (1152) -> physical 16ef9000 (1152)
    May 18 20:31:32 fritz user.warn kernel: dfs_init_radar_filters: dfs->dfs_rinfo.rn_numradars: 0
    May 18 20:31:32 fritz user.warn kernel: DFS min filter rssiThresh = 21
    May 18 20:31:32 fritz user.warn kernel: DFS max pulse dur = 131 ticks
    May 18 20:31:32 fritz user.err kernel: wifi%d: spectral scan functionality not supported
    May 18 20:31:32 fritz user.warn kernel: ic_chainmask=7x7
    May 18 20:31:32 fritz user.warn kernel: wifi0: 11na rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
    May 18 20:31:32 fritz user.warn kernel: wifi0: 11na MCS: 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
    May 18 20:31:32 fritz user.warn kernel: wifi0: 11ng rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
    May 18 20:31:32 fritz user.warn kernel: wifi0: 11ng MCS: 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
    May 18 20:31:32 fritz user.warn kernel: wifi0: mac 13.2 phy 8.1 radio 12.0
    May 18 20:31:32 fritz user.warn kernel: wifi0: Use hw queue 1 for WME_AC_BE traffic
    May 18 20:31:32 fritz user.warn kernel: wifi0: Use hw queue 0 for WME_AC_BK traffic
    May 18 20:31:32 fritz user.warn kernel: wifi0: Use hw queue 2 for WME_AC_VI traffic
    May 18 20:31:32 fritz user.warn kernel: wifi0: Use hw queue 3 for WME_AC_VO traffic
    May 18 20:31:32 fritz user.warn kernel: wifi0: Use hw queue 8 for CAB traffic
    May 18 20:31:32 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_cpuclock: norm_power_rate=100 act_rate=100 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=0 mW
    May 18 20:31:32 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_systemclock: norm_power_rate=100 act_rate=100 mul=65 div=10 offset=1793 NormP=2443 mW -> SumNormP=2443 mW
    May 18 20:31:32 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_wlan: norm_power_rate=100 act_rate=100 mul=84 div=10 offset=100 NormP=940 mW -> SumNormP=3383 mW
    May 18 20:31:32 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_isdnnt: norm_power_rate=100 act_rate=0 mul=1 div=1 offset=0 NormP=100 mW -> SumNormP=3483 mW
    May 18 20:31:32 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_isdnte: norm_power_rate=100 act_rate=0 mul=1 div=1 offset=0 NormP=100 mW -> SumNormP=3583 mW
    May 18 20:31:32 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_analog: norm_power_rate=200 act_rate=0 mul=141 div=10 offset=100 NormP=2920 mW -> SumNormP=6503 mW
    May 18 20:31:32 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_dect: norm_power_rate=100 act_rate=0 mul=200 div=78 offset=150 NormP=406 mW -> SumNormP=6909 mW
    May 18 20:31:32 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_ethernet: norm_power_rate=467 act_rate=1090519357 mul=1 div=1 offset=50 NormP=517 mW -> SumNormP=7426 mW
    May 18 20:31:32 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_dsl: norm_power_rate=100 act_rate=50 mul=15 div=1 offset=0 NormP=1500 mW -> SumNormP=8926 mW
    May 18 20:31:32 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_usb_host: norm_power_rate=500 act_rate=100 mul=55 div=10 offset=0 NormP=2750 mW -> SumNormP=11676 mW
    May 18 20:31:32 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_usb_client: norm_power_rate=0 act_rate=0 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=11676 mW
    May 18 20:31:32 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_charge: norm_power_rate=446 act_rate=0 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=11676 mW
    May 18 20:31:32 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_loadrate: norm_power_rate=100 act_rate=92 mul=29 div=10 offset=-17 NormP=273 mW -> SumNormP=11949 mW
    May 18 20:31:32 fritz user.info kernel: SysRq : Changing Loglevel
    May 18 20:31:32 fritz user.warn kernel: Loglevel set to 4
    May 18 20:31:32 fritz user.warn kernel: [4294945561]system-load 100 % 69 tasks:20 % curr:rc.S(0 %) max:telefon(6 %, pid:2242), readytorun: 1, pgfault 6827/s (max 2 avg 1.0)
    May 18 20:31:32 fritz user.info kernel: /proc/tffs: info request: success
    May 18 20:31:32 fritz user.warn kernel: [4294946623]system-load 100 % 82 tasks:7 % curr:service(0 %) max:service(1 %, pid:3686), readytorun: 3, pgfault 10059/s (max 2 avg 1.0)
    May 18 20:31:32 fritz user.info kernel: usbcore: registered new interface driver usbserial
    May 18 20:31:32 fritz user.info kernel: USB Serial support registered for generic
    May 18 20:31:32 fritz user.info kernel: usbcore: registered new interface driver usbserial_generic
    May 18 20:31:32 fritz user.info kernel: usbserial: USB Serial Driver core
    May 18 20:31:32 fritz user.info kernel: USB Serial support registered for FTDI USB Serial Device
    May 18 20:31:32 fritz user.info kernel: ftdi_sio 1-1.3.3:1.0: FTDI USB Serial Device converter detected
    May 18 20:31:32 fritz user.info kernel: usb 1-1.3.3: Detected FT232RL
    May 18 20:31:32 fritz user.info kernel: usb 1-1.3.3: Number of endpoints 2
    May 18 20:31:32 fritz user.info kernel: usb 1-1.3.3: Endpoint 1 MaxPacketSize 64
    May 18 20:31:32 fritz user.info kernel: usb 1-1.3.3: Endpoint 2 MaxPacketSize 64
    May 18 20:31:32 fritz user.info kernel: usb 1-1.3.3: Setting MaxPacketSize 64
    May 18 20:31:32 fritz user.info kernel: usb 1-1.3.3: FTDI USB Serial Device converter now attached to ttyUSB0
    May 18 20:31:32 fritz user.info kernel: usbcore: registered new interface driver ftdi_sio
    May 18 20:31:32 fritz user.info kernel: ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
    May 18 20:31:32 fritz user.warn kernel: Algorithmics/MIPS FPU Emulator v1.5
    May 18 20:31:32 fritz user.warn kernel: [4294948034]system-load 6 75 tasks:10 % curr:modreg(0 %) max:cccam(7 %, pid:4411), readytorun: 3, pgfault 4733/s (max 2 avg 1.0)
    May 18 20:31:32 fritz user.warn kernel: [4294949034]system-load 100 % 79 tasks:47 % curr:cccam(42 %) max:cccam(42 %, pid:4411), readytorun: 2, pgfault 7107/s (max 1 avg 1.0)
    May 18 20:31:32 fritz user.warn kernel: [4294950035]system-load 100 % 79 tasks:66 % curr:conf(0 %) max:cccam(63 %, pid:4411), readytorun: 2, pgfault 3593/s (max 1 avg 1.0)
    May 18 20:31:32 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    May 18 20:31:32 fritz user.warn kernel: [4294953666]system-load 6 77 tasks:3 % curr:modreg(0 %) max:cccam(1 %, pid:4411), readytorun: 2, pgfault 2614/s (max 1 avg 1.0)
    May 18 20:31:32 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200
    May 18 20:31:32 fritz user.warn kernel: [4294954695]system-load 100 % 79 tasks:8 % curr:modreg(0 %) max:menu-update(4 %, pid:6406), readytorun: 2, pgfault 9792/s (max 1 avg 1.0)
    May 18 20:31:32 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200
    May 18 18:31:33 fritz daemon.debug CCcam: card detect fail
    May 18 18:31:35 fritz daemon.debug CCcam: card detect fail
    May 18 18:31:37 fritz daemon.debug CCcam: card detect fail
    May 18 18:31:39 fritz daemon.debug CCcam: card detect fail
    May 18 18:31:41 fritz daemon.debug CCcam: card detect fail
    May 18 18:31:42 fritz daemon.debug CCcam: card detect fail
    May 18 18:31:44 fritz daemon.debug CCcam: card detect fail
    May 18 18:31:46 fritz daemon.debug CCcam: card detect fail
    May 18 18:31:48 fritz daemon.debug CCcam: card detect fail
    May 18 18:31:50 fritz daemon.debug CCcam: card detect fail
    May 18 18:31:52 fritz daemon.debug CCcam: card detect fail
    May 18 18:31:53 fritz daemon.debug CCcam: card detect fail
    May 18 18:31:55 fritz daemon.debug CCcam: card detect fail
    May 18 18:31:57 fritz daemon.debug CCcam: card detect fail
    May 18 18:31:59 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:01 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:02 fritz daemon.debug CCcam: card detect fail
    May 18 20:32:03 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200
    May 18 20:32:04 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200
    May 18 18:32:04 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:06 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:08 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:10 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:12 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:13 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:15 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:17 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:19 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:21 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:22 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:24 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:26 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:28 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:30 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:32 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:33 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:35 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:37 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:39 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:41 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:42 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:44 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:46 fritz daemon.debug CCcam: card detect fail
    May 18 20:32:47 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    May 18 20:32:47 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    May 18 18:32:48 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:50 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:52 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:53 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:55 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:57 fritz daemon.debug CCcam: card detect fail
    May 18 18:32:59 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:01 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:03 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:04 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:06 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:08 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:10 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:12 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:13 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:15 fritz daemon.debug CCcam: card detect fail
    May 18 20:33:17 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    May 18 18:33:17 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:19 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:21 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:23 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:24 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:26 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:28 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:30 fritz daemon.debug CCcam: card detect fail
    May 18 20:33:31 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200
    May 18 20:33:31 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200
    May 18 18:33:32 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:33 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:35 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:37 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:39 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:41 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:43 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:44 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:46 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:48 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:50 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:52 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:53 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:55 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:57 fritz daemon.debug CCcam: card detect fail
    May 18 18:33:59 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:01 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:03 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:04 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:06 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:08 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:10 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:12 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:13 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:15 fritz daemon.debug CCcam: card detect fail
    May 18 20:34:16 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    May 18 20:34:16 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    May 18 20:34:16 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    May 18 20:34:16 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    May 18 18:34:17 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:19 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:21 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:23 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:24 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:26 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:28 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:30 fritz daemon.debug CCcam: card detect fail
    May 18 20:34:31 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200
    May 18 18:34:32 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:34 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:35 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:37 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:39 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:41 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:43 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:44 fritz daemon.debug CCcam: card detect fail
    May 18 20:34:45 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    May 18 18:34:46 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:48 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:50 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:52 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:54 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:55 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:57 fritz daemon.debug CCcam: card detect fail
    May 18 18:34:59 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:01 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:03 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:04 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:06 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:08 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:10 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:12 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:14 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:15 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:17 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:19 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:21 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:23 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:24 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:26 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:28 fritz daemon.debug CCcam: card detect fail
    May 18 20:35:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200
    May 18 18:35:30 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:32 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:34 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:35 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:37 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:39 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:41 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:43 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:44 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:46 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:48 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:50 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:52 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:54 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:55 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:57 fritz daemon.debug CCcam: card detect fail
    May 18 18:35:59 fritz daemon.debug CCcam: card detect fail
    May 18 18:36:01 fritz daemon.debug CCcam: card detect fail
    May 18 18:36:03 fritz daemon.debug CCcam: card detect fail
    May 18 18:36:05 fritz daemon.debug CCcam: card detect fail
    May 18 18:36:06 fritz daemon.debug CCcam: card detect fail
    May 18 18:36:08 fritz daemon.debug CCcam: card detect fail
    May 18 18:36:10 fritz daemon.debug CCcam: card detect fail
    May 18 18:36:12 fritz daemon.debug CCcam: card detect fail
    May 18 18:36:14 fritz daemon.debug CCcam: card detect fail
    May 18 18:36:15 fritz daemon.debug CCcam: card detect fail
    May 18 20:36:16 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    May 18 18:36:17 fritz daemon.debug CCcam: card detect fail
    May 18 18:36:19 fritz daemon.debug CCcam: card detect fail
    May 18 18:36:21 fritz daemon.debug CCcam: card detect fail
    May 18 18:36:23 fritz daemon.debug CCcam: card detect fail
    May 18 18:36:25 fritz daemon.debug CCcam: card detect fail
    May 18 18:36:26 fritz daemon.debug CCcam: card detect fail
    May 18 18:36:28 fritz daemon.debug CCcam: card detect fail
    May 18 18:36:30 fritz daemon.debug CCcam: card detect fail
    May 18 20:36:30 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 200
    May 18 18:36:32 fritz daemon.debug CCcam: card detect fail
    May 18 18:36:34 fritz daemon.debug CCcam: card detect fail
    May 18 18:36:35 fritz daemon.debug CCcam: card detect fail
    May 18 18:36:37 fritz daemon.debug CCcam: card detect fail
    May 18 18:36:39 fritz daemon.debug CCcam: card detect fail
    May 18 18:36:41 fritz daemon.debug CCcam: card detect fail
    May 18 18:36:43 fritz daemon.debug CCcam: card detect fail
    May 18 18:36:45 fritz daemon.debug CCcam: card detect fail
    May 18 20:36:45 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    May 18 20:36:46 fritz user.warn kernel: musb_mux_helper_func 233: BOGUS NAK Timeout#4 urb (null) qh (null) csr 0
    May 18 18:36:46 fritz daemon.debug CCcam: card detect fail
    May 18 18:36:48 fritz daemon.debug CCcam: card detect fail
    May 18 18:36:50 fritz daemon.debug CCcam: card detect fail
    May 18 18:36:52 fritz daemon.debug CCcam: card detect fail


    18.05.2012 20:31 – up 4 min – optimiert für Mozilla Firefox
     
    #14
  16. rolu2
    Offline

    rolu2 Moderator Digital Eliteboard Team

    Registriert:
    16. November 2009
    Beiträge:
    6.332
    Zustimmungen:
    3.912
    Punkte für Erfolge:
    113
    Habe dir mal ein

    Dieser Link ist nur für Mitglieder!!! Jetzt kostenlos Registrieren ?

    mit der neuen AVM-Firmeware gebaut. Kannst ja mal testen

    Normal baue ich hier nicht, sondern auf einem andern Board
     
    Zuletzt bearbeitet: 19. Mai 2012
    #15
    funnymaus gefällt das.

Diese Seite empfehlen