1. Diese Seite verwendet Cookies. Wenn du dich weiterhin auf dieser Seite aufhältst, akzeptierst du unseren Einsatz von Cookies. Weitere Informationen

Talk bekomme meine Easymouse 2 nicht dauerhaft zum laufen

Dieses Thema im Forum "Fritzbox Talk" wurde erstellt von gottschi, 16. Februar 2013.

  1. gottschi
    Offline

    gottschi Newbie

    Registriert:
    2. März 2011
    Beiträge:
    12
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    Hallo Zusammen,

    bekomme meine Easymouse 2 nicht dauerhaft zum laufen.
    Wenn ich die Karte (V14) langsam bis kurz vor Anschlag rein schiebe fangen beide LEDs (die grüne und rote) an zu leuchten und die Karte wird von oscam erkannt. Dauert aber leider nur wenige sekunden dann gehen die Lichter wieder aus.

    Was kann das sein?

    2013/02/16 19:58:49 59B9A8 r skyv14 [mouse] card detected
    2013/02/16 19:58:50 59B9A8 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
    2013/02/16 19:58:50 59B9A8 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
    2013/02/16 19:58:50 59B9A8 r skyv14 [mouse] Setting baudrate to 38400 bps
    2013/02/16 19:58:50 59B9A8 r skyv14 [mouse] Calculated work ETU is 26.05 us
    2013/02/16 19:58:50 59B9A8 r skyv14 [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
    2013/02/16 19:58:51 59B9A8 r skyv14 [mouse] Card type: P1TV
    2013/02/16 19:58:51 59B9A8 r skyv14 [mouse] Rom version: 20AA
    2013/02/16 19:58:52 59B9A8 r skyv14 [mouse] parental lock setting: FF FF FF FF
    2013/02/16 19:58:52 59B9A8 r skyv14 [mouse] type: VideoGuard Sky Germany (098C), caid: 098C
    2013/02/16 19:58:52 59B9A8 r skyv14 [mouse] serial: ########, BoxID: ########, baseyear: 2004
    2013/02/16 19:58:52 59B9A8 r skyv14 [mouse] ready for requests
    2013/02/16 19:58:52 59B9A8 r skyv14 [mouse] found card system videoguard2
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] card detected
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] type: VideoGuard Sky Germany (098C)
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] tier: 0046, expiry date: 2013/05/28-01:00:00
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] tier: 0056, expiry date: 2013/05/28-01:00:00
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] tier: 0057, expiry date: 2013/05/28-01:00:00
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] tier: 0058, expiry date: 2013/05/28-01:00:00
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] tier: 005a, expiry date: 2013/05/28-01:00:00
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] tier: 0065, expiry date: 2013/05/28-01:00:00
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] tier: 0066, expiry date: 2013/05/28-01:00:00
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] tier: 0067, expiry date: 2013/05/28-01:00:00
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] tier: 0068, expiry date: 2013/05/28-01:00:00
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] tier: 0069, expiry date: 2013/05/28-01:00:00
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] tier: 006a, expiry date: 2013/05/28-01:00:00
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] tier: 006b, expiry date: 2013/05/28-01:00:00
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] tier: 006c, expiry date: 2013/05/28-01:00:00
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] tier: 006d, expiry date: 2013/05/28-01:00:00
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] tier: 006e, expiry date: 2013/05/28-01:00:00
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] tier: 006f, expiry date: 2013/05/28-01:00:00
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] tier: 007b, expiry date: 2013/05/28-01:00:00
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] tier: 007d, expiry date: 2013/05/28-01:00:00
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] tier: 0081, expiry date: 2013/05/28-01:00:00
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] tier: 008e, expiry date: 2013/05/28-01:00:00
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] tier: 00c0, expiry date: 2013/05/28-01:00:00
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] tier: 00c7, expiry date: 2013/05/28-01:00:00
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] tier: 00c8, expiry date: 2013/05/28-01:00:00
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] tier: 00c9, expiry date: 2013/05/28-01:00:00
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] tier: 00ca, expiry date: 2013/05/28-01:00:00
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] tier: 00cb, expiry date: 2013/05/28-01:00:00
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] tier: 00f3, expiry date: 2013/05/28-01:00:00
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] tier: 00fa, expiry date: 2013/05/28-01:00:00
    2013/02/16 19:58:52 59B9A8 r skyv14 [videoguard2] tier: 00ff, expiry date: 2013/05/28-01:00:00
     
    Zuletzt von einem Moderator bearbeitet: 17. Februar 2013
    #1
  2. phantom

    Nervigen User Advertisement

  3. Kermit
    Offline

    Kermit Guest

    AW: bekomme meine Easymouse 2 nicht dauerhaft zum laufen

    Hi,

    die V14 muß bis zum Anschlag rein geschoben werden und die LEDs blinken danach auch nur auf, wenn auf die Karte zugegriffen wird.

    Grüße

    Kermit
     
    #2
  4. gottschi
    Offline

    gottschi Newbie

    Registriert:
    2. März 2011
    Beiträge:
    12
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    AW: bekomme meine Easymouse 2 nicht dauerhaft zum laufen

    Hi Kermit,

    danke für die Info.
    Ggf. scheit es dann daran zu liegen, dass niocht richtig auf die Karte zugegriffen wird?

    Mein Logfile sieht so aus:
    -------------------------------------------------------------------------------
    >> OSCam << cardserver started at Sat Feb 16 21:16:42 2013
    -------------------------------------------------------------------------------
    2013/02/16 21:16:42 0 s starting thread log_list_thread
    2013/02/16 21:16:42 0 s log_list_thread thread started
    2013/02/16 21:16:42 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7936 (mipsel-linux-uclibc-ssl-libusb-pcsc)
    2013/02/16 21:16:42 0 s version=1.20-unstable_svn, build #7936, system=mipsel-linux-uclibc-ssl-libusb-pcsc, nice=-1
    2013/02/16 21:16:42 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
    2013/02/16 21:16:42 0 s max. logsize=1000 Kb, loghistorysize=4096 bytes
    2013/02/16 21:16:42 0 s client timeout=5000 ms, fallback timeout=4900 ms, cache delay=120 ms
    2013/02/16 21:16:42 0 s services reloaded: 0 services freed, 3 services loaded, rejected 0
    2013/02/16 21:16:42 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
    2013/02/16 21:16:42 0 s signal handling initialized (type=sysv)
    2013/02/16 21:16:42 0 s 116 service-id's loaded in 5ms
    2013/02/16 21:16:42 0 s 116 tier-id's loaded
    2013/02/16 21:16:42 0 s 3 provid's loaded
    2013/02/16 21:16:42 0 s 22 lengths for caid guessing loaded
    2013/02/16 21:16:42 0 s ERROR: Cannot open file "/var/media/ftp/uStor01/service/oscam//oscam.whitelist" (errno=2 No such file or directory)
    2013/02/16 21:16:42 0 s ERROR: Cannot open file "/var/media/ftp/uStor01/service/oscam//oscam.cacheex" (errno=2 No such file or directory)
    2013/02/16 21:16:42 0 s Starting listener 0
    2013/02/16 21:16:42 0 s monitor: initialized (fd=8, port=988)
    2013/02/16 21:16:42 0 s Starting listener 0
    2013/02/16 21:16:42 0 s camd33: disabled
    2013/02/16 21:16:42 0 s Starting listener 0
    2013/02/16 21:16:42 0 s camd35: disabled
    2013/02/16 21:16:42 0 s Starting listener 0
    2013/02/16 21:16:42 0 s cs378x: disabled
    2013/02/16 21:16:42 0 s Starting listener 0
    2013/02/16 21:16:42 0 s newcamd: disabled
    2013/02/16 21:16:42 0 s Starting listener 0
    2013/02/16 21:16:42 0 s cccam: initialized (fd=9, port=12000, crypted)
    2013/02/16 21:16:42 0 s Starting listener 0
    2013/02/16 21:16:42 0 s pandora: disabled
    2013/02/16 21:16:42 0 s Starting listener 0
    2013/02/16 21:16:42 0 s csp: disabled
    2013/02/16 21:16:42 0 s Starting listener 0
    2013/02/16 21:16:42 0 s radegast: disabled
    2013/02/16 21:16:42 0 s starting thread http
    2013/02/16 21:16:42 0 s http thread started
    2013/02/16 21:16:42 0 s starting thread reader check
    2013/02/16 21:16:42 0 s reader check thread started
    2013/02/16 21:16:42 0 s starting thread check
    2013/02/16 21:16:42 59B850 h HTTP Server listening on port 83
    2013/02/16 21:16:42 0 s check thread started
    2013/02/16 21:16:42 0 s skyv14 [mouse] creating thread for device /dev/ttyUSB0
    2013/02/16 21:16:42 0 s loadbalancer: can't read from file /tmp/.oscam/stat
    2013/02/16 21:16:42 0 s waiting for local card init
    2013/02/16 21:16:42 5A3C80 r skyv14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
    2013/02/16 21:16:43 5A3C80 r skyv14 [mouse] card detected
    2013/02/16 21:16:44 5A3C80 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
    2013/02/16 21:16:44 5A3C80 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
    2013/02/16 21:16:44 5A3C80 r skyv14 [mouse] Setting baudrate to 38400 bps
    2013/02/16 21:16:44 5A3C80 r skyv14 [mouse] Calculated work ETU is 26.05 us
    2013/02/16 21:16:44 5A3C80 r skyv14 [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
    2013/02/16 21:16:46 5A3C80 r skyv14 [mouse] Card type: P1TV
    2013/02/16 21:16:46 5A3C80 r skyv14 [mouse] Rom version: 20AA
    2013/02/16 21:16:46 5A3C80 r skyv14 [mouse] parental lock setting: FF FF FF FF
    2013/02/16 21:16:46 5A3C80 r skyv14 [mouse] type: VideoGuard Sky Germany (098C), caid: 098C
    2013/02/16 21:16:46 5A3C80 r skyv14 [mouse] serial: ########, BoxID: ########, baseyear: 2004
    2013/02/16 21:16:46 5A3C80 r skyv14 [mouse] ready for requests
    2013/02/16 21:16:46 5A3C80 r skyv14 [mouse] found card system videoguard2
    2013/02/16 21:16:46 5A3C80 r skyv14 [videoguard2] card detected
    2013/02/16 21:16:46 5A3C80 r skyv14 [videoguard2] type: VideoGuard Sky Germany (098C)
    2013/02/16 21:16:47 5A3C80 r skyv14 [videoguard2] tier: 0046, expiry date: 2013/05/28-01:00:00
    2013/02/16 21:16:47 5A3C80 r skyv14 [videoguard2] tier: 0056, expiry date: 2013/05/28-01:00:00
    2013/02/16 21:16:47 5A3C80 r skyv14 [videoguard2] tier: 0057, expiry date: 2013/05/28-01:00:00
    2013/02/16 21:16:47 5A3C80 r skyv14 [videoguard2] tier: 0058, expiry date: 2013/05/28-01:00:00
    2013/02/16 21:16:47 5A3C80 r skyv14 [videoguard2] tier: 005a, expiry date: 2013/05/28-01:00:00
    2013/02/16 21:16:47 5A3C80 r skyv14 [videoguard2] tier: 0065, expiry date: 2013/05/28-01:00:00
    2013/02/16 21:16:47 5A3C80 r skyv14 [videoguard2] tier: 0066, expiry date: 2013/05/28-01:00:00
    2013/02/16 21:16:47 5A3C80 r skyv14 [videoguard2] tier: 0067, expiry date: 2013/05/28-01:00:00
    2013/02/16 21:16:47 5A3C80 r skyv14 [videoguard2] tier: 0068, expiry date: 2013/05/28-01:00:00
    2013/02/16 21:16:47 5A3C80 r skyv14 [videoguard2] tier: 0069, expiry date: 2013/05/28-01:00:00
    2013/02/16 21:16:47 5A3C80 r skyv14 [videoguard2] tier: 006a, expiry date: 2013/05/28-01:00:00
    2013/02/16 21:16:47 5A3C80 r skyv14 [videoguard2] tier: 006b, expiry date: 2013/05/28-01:00:00
    2013/02/16 21:16:47 5A3C80 r skyv14 [videoguard2] tier: 006c, expiry date: 2013/05/28-01:00:00
    2013/02/16 21:16:47 5A3C80 r skyv14 [videoguard2] tier: 006d, expiry date: 2013/05/28-01:00:00
    2013/02/16 21:16:47 5A3C80 r skyv14 [videoguard2] tier: 006e, expiry date: 2013/05/28-01:00:00
    2013/02/16 21:16:47 5A3C80 r skyv14 [videoguard2] tier: 006f, expiry date: 2013/05/28-01:00:00
    2013/02/16 21:16:47 5A3C80 r skyv14 [videoguard2] tier: 007b, expiry date: 2013/05/28-01:00:00
    2013/02/16 21:16:48 5A3C80 r skyv14 [videoguard2] tier: 007d, expiry date: 2013/05/28-01:00:00
    2013/02/16 21:16:48 5A3C80 r skyv14 [videoguard2] tier: 0081, expiry date: 2013/05/28-01:00:00
    2013/02/16 21:16:48 5A3C80 r skyv14 [videoguard2] tier: 008e, expiry date: 2013/05/28-01:00:00
    2013/02/16 21:16:48 5A3C80 r skyv14 [videoguard2] tier: 00c0, expiry date: 2013/05/28-01:00:00
    2013/02/16 21:16:48 5A3C80 r skyv14 [videoguard2] tier: 00c7, expiry date: 2013/05/28-01:00:00
    2013/02/16 21:16:48 5A3C80 r skyv14 [videoguard2] tier: 00c8, expiry date: 2013/05/28-01:00:00
    2013/02/16 21:16:48 5A3C80 r skyv14 [videoguard2] tier: 00c9, expiry date: 2013/05/28-01:00:00
    2013/02/16 21:16:48 5A3C80 r skyv14 [videoguard2] tier: 00ca, expiry date: 2013/05/28-01:00:00
    2013/02/16 21:16:48 5A3C80 r skyv14 [videoguard2] tier: 00cb, expiry date: 2013/05/28-01:00:00
    2013/02/16 21:16:48 5A3C80 r skyv14 [videoguard2] tier: 00f3, expiry date: 2013/05/28-01:00:00
    2013/02/16 21:16:48 5A3C80 r skyv14 [videoguard2] tier: 00fa, expiry date: 2013/05/28-01:00:00
    2013/02/16 21:16:48 5A3C80 r skyv14 [videoguard2] tier: 00ff, expiry date: 2013/05/28-01:00:00
    2013/02/16 21:17:02 0 s init for all local cards done
    2013/02/16 21:17:02 0 s anti cascading disabled
    2013/02/16 21:17:02 5A8830 c anonymous disconnected from 192.168.178.2
    2013/02/16 21:17:02 5AA040 c encrypted cccam-client 192.168.178.2 granted (XXX, au=auto (1 reader))
    Kannst Du etwas erkennen?
    Client ist eine DM800se mit cccam.
     
    Zuletzt von einem Moderator bearbeitet: 17. Februar 2013
    #3
  5. Kermit
    Offline

    Kermit Guest

    AW: bekomme meine Easymouse 2 nicht dauerhaft zum laufen

    Hi,

    laut deinem Logfile wird die Karte sauber erkannt, der Client meldet sich an und dann hört das Logfile auf.
    Es ist nicht zu sehen ob eine Anfrage kommt und wie diese beantwortet wird.

    Grüße

    Kermit
     
    #4
  6. gottschi
    Offline

    gottschi Newbie

    Registriert:
    2. März 2011
    Beiträge:
    12
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    AW: bekomme meine Easymouse 2 nicht dauerhaft zum laufen

    mmh.....

    was kann cih wohl noch versuchen?
    Kann es ggf.sein, dass ich an der Dreambox noch etwas umstellen muss?
    Habe in den cccam.conf der Dreambox ausschließlich die c.line enthalten.
     
    #5
  7. Kermit
    Offline

    Kermit Guest

    AW: bekomme meine Easymouse 2 nicht dauerhaft zum laufen

    Hi,

    ein Anfang wäre mal damit gemacht, wenn du uns auch deine restlichen Konfigs zuer Verfügung stellst. Alles andere ist im Moment Kaffeesatzleserei,

    Grüße

    Kermit
     
    #6
  8. gottschi
    Offline

    gottschi Newbie

    Registriert:
    2. März 2011
    Beiträge:
    12
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    AW: bekomme meine Easymouse 2 nicht dauerhaft zum laufen

    ok anbei meine konfigs:

    OsCam.conf:

    # oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7936
    # Read more:

    Dieser Link ist nur für Mitglieder!!! Jetzt kostenlos Registrieren ?


    [global]
    logfile = /var/media/ftp/uStor01/logs/oscam.log
    disablelog = 0
    disableuserfile = 0
    usrfileflag = 0
    clienttimeout = 5000
    fallbacktimeout = 20
    clientmaxidle = 120
    cachedelay = 120
    bindwait = 120
    netprio = 0
    clientdyndns = 0
    resolvedelay = 30
    unlockparental = 0
    nice = -1
    serialreadertimeout = 1500
    maxlogsize = 1000
    waitforcards = 1
    preferlocalcards = 1
    saveinithistory = 1
    readerrestartseconds = 5

    [monitor]
    port = 988
    nocrypt = 192.168.0.0-192.168.255.255
    aulow = 120
    hideclient_to = 30
    monlevel = 1
    appendchaninfo = 0

    [webif]
    httpport = 83
    httpcss = /var/media/ftp/uStor01/service/oscam/style.css
    httprefresh = 10
    httpallowed = 192.168.0.0-192.168.255.255
    httphideidleclients = 1
    httpreadonly = 0
    httpuser= dirk
    httppwd= dirk

    [cccam]
    Port = 12000
    Reshare = 2
    Ignorereshare = 1
    Version = 2.3.0
    Stealth = 0

    [dvbapi]
    Enabled = 1
    Boxtype = Fritzbox
    User = DVBApi
    decodeforever = 1
    AU = 1


    OsCam.server:

    # oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7936
    # Read more:

    Dieser Link ist nur für Mitglieder!!! Jetzt kostenlos Registrieren ?


    [reader]
    label = skyv14
    protocol = mouse
    device = /dev/ttyUSB0
    services = sky_de,hd+
    caid = 098C
    boxid = 12345678
    detect = cd
    mhz = 357
    cardmhz = 357
    group = 1
    emmcache = 1,1,2
    blockemm-unknown = 1


    OsCam.user:

    [account]
    user = gottschi
    pwd = wohnzimmer
    group = 1
    uniq = 0
    sleep = 0
    monlevel = 1
    au = 1
    caid = 1830
    cccmaxhops = 1
    cccreshare = 1

    cccam.conf der Dreambox:

    C: 192.168.178.1 12000 gottschi wohnzimmer

    Logfile oscam auf der Fritzbox:

    -------------------------------------------------------------------------------
    >> OSCam << cardserver started at Sun Feb 17 09:46:13 2013
    -------------------------------------------------------------------------------
    2013/02/17 09:46:13 0 s starting thread log_list_thread
    2013/02/17 09:46:13 0 s log_list_thread thread started
    2013/02/17 09:46:13 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7936 (mipsel-linux-uclibc-ssl-libusb-pcsc)
    2013/02/17 09:46:13 0 s version=1.20-unstable_svn, build #7936, system=mipsel-linux-uclibc-ssl-libusb-pcsc, nice=-1
    2013/02/17 09:46:13 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
    2013/02/17 09:46:13 0 s max. logsize=1000 Kb, loghistorysize=4096 bytes
    2013/02/17 09:46:13 0 s client timeout=5000 ms, fallback timeout=4900 ms, cache delay=120 ms
    2013/02/17 09:46:13 0 s services reloaded: 0 services freed, 3 services loaded, rejected 0
    2013/02/17 09:46:13 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
    2013/02/17 09:46:13 0 s signal handling initialized (type=sysv)
    2013/02/17 09:46:13 0 s 116 service-id's loaded in 5ms
    2013/02/17 09:46:13 0 s 116 tier-id's loaded
    2013/02/17 09:46:13 0 s 3 provid's loaded
    2013/02/17 09:46:13 0 s 22 lengths for caid guessing loaded
    2013/02/17 09:46:13 0 s ERROR: Cannot open file "/var/media/ftp/uStor01/service/oscam//oscam.whitelist" (errno=2 No such file or directory)
    2013/02/17 09:46:13 0 s ERROR: Cannot open file "/var/media/ftp/uStor01/service/oscam//oscam.cacheex" (errno=2 No such file or directory)
    2013/02/17 09:46:13 0 s Starting listener 0
    2013/02/17 09:46:13 0 s monitor: initialized (fd=8, port=988)
    2013/02/17 09:46:13 0 s Starting listener 0
    2013/02/17 09:46:13 0 s camd33: disabled
    2013/02/17 09:46:13 0 s Starting listener 0
    2013/02/17 09:46:13 0 s camd35: disabled
    2013/02/17 09:46:13 0 s Starting listener 0
    2013/02/17 09:46:13 0 s cs378x: disabled
    2013/02/17 09:46:13 0 s Starting listener 0
    2013/02/17 09:46:13 0 s newcamd: disabled
    2013/02/17 09:46:13 0 s Starting listener 0
    2013/02/17 09:46:13 0 s cccam: initialized (fd=9, port=12000, crypted)
    2013/02/17 09:46:13 0 s Starting listener 0
    2013/02/17 09:46:13 0 s pandora: disabled
    2013/02/17 09:46:13 0 s Starting listener 0
    2013/02/17 09:46:13 0 s csp: disabled
    2013/02/17 09:46:13 0 s Starting listener 0
    2013/02/17 09:46:13 0 s radegast: disabled
    2013/02/17 09:46:13 0 s starting thread http
    2013/02/17 09:46:13 0 s http thread started
    2013/02/17 09:46:13 0 s starting thread reader check
    2013/02/17 09:46:13 0 s reader check thread started
    2013/02/17 09:46:13 0 s starting thread check
    2013/02/17 09:46:13 0 s check thread started
    2013/02/17 09:46:13 0 s skyv14 [mouse] creating thread for device /dev/ttyUSB0
    2013/02/17 09:46:13 5A3C78 h HTTP Server listening on port 83
    2013/02/17 09:46:13 0 s loadbalancer: can't read from file /tmp/.oscam/stat
    2013/02/17 09:46:13 0 s waiting for local card init
    2013/02/17 09:46:13 59A0A8 r skyv14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
    2013/02/17 09:46:14 59A0A8 r skyv14 [mouse] card detected
    2013/02/17 09:46:15 59A0A8 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
    2013/02/17 09:46:15 59A0A8 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
    2013/02/17 09:46:15 59A0A8 r skyv14 [mouse] Setting baudrate to 38400 bps
    2013/02/17 09:46:15 59A0A8 r skyv14 [mouse] Calculated work ETU is 26.05 us
    2013/02/17 09:46:15 59A0A8 r skyv14 [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
    2013/02/17 09:46:16 59A0A8 r skyv14 [mouse] Card type: P1TV
    2013/02/17 09:46:16 59A0A8 r skyv14 [mouse] Rom version: 20AA
    2013/02/17 09:46:17 59A0A8 r skyv14 [mouse] parental lock setting: FF FF FF FF
    2013/02/17 09:46:17 59A0A8 r skyv14 [mouse] type: VideoGuard Sky Germany (098C), caid: 098C
    2013/02/17 09:46:17 59A0A8 r skyv14 [mouse] serial: ########, BoxID: ########, baseyear: 2004
    2013/02/17 09:46:17 59A0A8 r skyv14 [mouse] ready for requests
    2013/02/17 09:46:17 59A0A8 r skyv14 [mouse] found card system videoguard2
    2013/02/17 09:46:17 59A0A8 r skyv14 [videoguard2] card detected
    2013/02/17 09:46:17 59A0A8 r skyv14 [videoguard2] type: VideoGuard Sky Germany (098C)
    2013/02/17 09:46:17 59A0A8 r skyv14 [videoguard2] tier: 0046, expiry date: 2013/05/28-01:00:00
    2013/02/17 09:46:18 59A0A8 r skyv14 [videoguard2] tier: 0056, expiry date: 2013/05/28-01:00:00
    2013/02/17 09:46:18 59A0A8 r skyv14 [videoguard2] tier: 0057, expiry date: 2013/05/28-01:00:00
    2013/02/17 09:46:18 59A0A8 r skyv14 [videoguard2] tier: 0058, expiry date: 2013/05/28-01:00:00
    2013/02/17 09:46:18 59A0A8 r skyv14 [videoguard2] tier: 005a, expiry date: 2013/05/28-01:00:00
    2013/02/17 09:46:18 59A0A8 r skyv14 [videoguard2] tier: 0065, expiry date: 2013/05/28-01:00:00
    2013/02/17 09:46:18 59A0A8 r skyv14 [videoguard2] tier: 0066, expiry date: 2013/05/28-01:00:00
    2013/02/17 09:46:18 59A0A8 r skyv14 [videoguard2] tier: 0067, expiry date: 2013/05/28-01:00:00
    2013/02/17 09:46:18 59A0A8 r skyv14 [videoguard2] tier: 0068, expiry date: 2013/05/28-01:00:00
    2013/02/17 09:46:18 59A0A8 r skyv14 [videoguard2] tier: 0069, expiry date: 2013/05/28-01:00:00
    2013/02/17 09:46:18 59A0A8 r skyv14 [videoguard2] tier: 006a, expiry date: 2013/05/28-01:00:00
    2013/02/17 09:46:18 59A0A8 r skyv14 [videoguard2] tier: 006b, expiry date: 2013/05/28-01:00:00
    2013/02/17 09:46:18 59A0A8 r skyv14 [videoguard2] tier: 006c, expiry date: 2013/05/28-01:00:00
    2013/02/17 09:46:18 59A0A8 r skyv14 [videoguard2] tier: 006d, expiry date: 2013/05/28-01:00:00
    2013/02/17 09:46:18 59A0A8 r skyv14 [videoguard2] tier: 006e, expiry date: 2013/05/28-01:00:00
    2013/02/17 09:46:18 59A0A8 r skyv14 [videoguard2] tier: 006f, expiry date: 2013/05/28-01:00:00
    2013/02/17 09:46:18 59A0A8 r skyv14 [videoguard2] tier: 007b, expiry date: 2013/05/28-01:00:00
    2013/02/17 09:46:18 59A0A8 r skyv14 [videoguard2] tier: 007d, expiry date: 2013/05/28-01:00:00
    2013/02/17 09:46:18 59A0A8 r skyv14 [videoguard2] tier: 0081, expiry date: 2013/05/28-01:00:00
    2013/02/17 09:46:19 59A0A8 r skyv14 [videoguard2] tier: 008e, expiry date: 2013/05/28-01:00:00
    2013/02/17 09:46:19 59A0A8 r skyv14 [videoguard2] tier: 00c0, expiry date: 2013/05/28-01:00:00
    2013/02/17 09:46:19 59A0A8 r skyv14 [videoguard2] tier: 00c7, expiry date: 2013/05/28-01:00:00
    2013/02/17 09:46:19 59A0A8 r skyv14 [videoguard2] tier: 00c8, expiry date: 2013/05/28-01:00:00
    2013/02/17 09:46:19 59A0A8 r skyv14 [videoguard2] tier: 00c9, expiry date: 2013/05/28-01:00:00
    2013/02/17 09:46:19 59A0A8 r skyv14 [videoguard2] tier: 00ca, expiry date: 2013/05/28-01:00:00
    2013/02/17 09:46:19 59A0A8 r skyv14 [videoguard2] tier: 00cb, expiry date: 2013/05/28-01:00:00
    2013/02/17 09:46:19 59A0A8 r skyv14 [videoguard2] tier: 00f3, expiry date: 2013/05/28-01:00:00
    2013/02/17 09:46:19 59A0A8 r skyv14 [videoguard2] tier: 00fa, expiry date: 2013/05/28-01:00:00
    2013/02/17 09:46:19 59A0A8 r skyv14 [videoguard2] tier: 00ff, expiry date: 2013/05/28-01:00:00
    2013/02/17 09:46:33 0 s init for all local cards done
    2013/02/17 09:46:33 0 s anti cascading disabled
    2013/02/17 09:46:33 5A9E18 c anonymous disconnected from 192.168.178.2
    2013/02/17 09:46:33 5AB628 c encrypted cccam-client 192.168.178.2 granted (gottschi, au=auto (1 reader))
     
    Zuletzt von einem Moderator bearbeitet: 17. Februar 2013
    #7
  9. Kermit
    Offline

    Kermit Guest

    AW: bekomme meine Easymouse 2 nicht dauerhaft zum laufen

    Hi,

    den Teil in der oscam.conf
    [dvbapi]
    Enabled = 1
    Boxtype = Fritzbox
    User = DVBApi
    decodeforever = 1
    AU = 1
    kannst du wieder entfernen. DVBAPI wird dazu benötigt um auf einem Receiver lokal das Bild zu entschlüsseln. Da die Fritte nicht selber ein Bild entschlüsseln und wiedergeben kann ist es fehl am Platze.

    In der oscam.user gibst du nur die Caid 1830 an und somit darf der Client auch nur Sender mit dieser einen Caid abfragen. Du hast aber eine V14 und diese arbeitet mit der 098C. Entweder gar nicht mit der Caid arbeiten in der oscam.user oder halt die richtige(n) angeben.

    Grüße

    Kermit
     
    #8
  10. gottschi
    Offline

    gottschi Newbie

    Registriert:
    2. März 2011
    Beiträge:
    12
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    AW: bekomme meine Easymouse 2 nicht dauerhaft zum laufen

    Gar nicht mit der Caid arbeiten....meinst Du einfach leer lassen oder #davor?
     
    #9
  11. Kermit
    Offline

    Kermit Guest

    AW: bekomme meine Easymouse 2 nicht dauerhaft zum laufen

    Hi,

    du kannst es dir aussuchen *g*
    Wenn hinter dem dem Parameter nichts kommt, so ist dies der default Wert und alle vorhandenen Caids können abgefragt werden. Mit einer # davor wird es als Kommentar in der Konfig gewertet und die Defaulteinstellungen kommen zum Tragen, womit wir wieder beim Anfang wären.

    Grüße

    Kermit
     
    #10
  12. gottschi
    Offline

    gottschi Newbie

    Registriert:
    2. März 2011
    Beiträge:
    12
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    na dann werd ich gleich mal testen....:)

    Hat leider nicht funktioniert

    config sieht nun so aus:
    # oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7936
    # Read more:

    Dieser Link ist nur für Mitglieder!!! Jetzt kostenlos Registrieren ?


    [global]
    logfile = /var/media/ftp/uStor01/logs/oscam.log
    disablelog = 0
    disableuserfile = 0
    usrfileflag = 0
    clienttimeout = 5000
    fallbacktimeout = 20
    clientmaxidle = 120
    cachedelay = 120
    bindwait = 120
    netprio = 0
    clientdyndns = 0
    resolvedelay = 30
    unlockparental = 0
    nice = -1
    serialreadertimeout = 1500
    maxlogsize = 1000
    waitforcards = 1
    preferlocalcards = 1
    saveinithistory = 1
    readerrestartseconds = 5

    [monitor]
    port = 988
    nocrypt = 192.168.0.0-192.168.255.255
    aulow = 120
    hideclient_to = 30
    monlevel = 1
    appendchaninfo = 0

    [webif]
    httpport = 83
    httpcss = /var/media/ftp/uStor01/service/oscam/style.css
    httprefresh = 10
    httpallowed = 192.168.0.0-192.168.255.255
    httphideidleclients = 1
    httpreadonly = 0
    httpuser= dirk
    httppwd= dirk

    [cccam]
    Port = 12000
    Reshare = 2
    Ignorereshare = 1
    Version = 2.3.0
    Stealth = 0

    user sieht nun so aus:
    # oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7936
    # Read more:

    Dieser Link ist nur für Mitglieder!!! Jetzt kostenlos Registrieren ?


    [account]
    user = gottschi
    pwd = wohnzimmer
    caid =
    monlevel = 1
    au = 1
    group = 1
    services = sky_de,hd+
    cccmaxhops = 1
    cccreshare = 1
    und log so:
    -------------------------------------------------------------------------------
    >> OSCam << cardserver started at Sun Feb 17 16:47:49 2013
    -------------------------------------------------------------------------------
    2013/02/17 16:47:49 0 s starting thread log_list_thread
    2013/02/17 16:47:49 0 s log_list_thread thread started
    2013/02/17 16:47:49 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7936 (mipsel-linux-uclibc-ssl-libusb-pcsc)
    2013/02/17 16:47:49 0 s version=1.20-unstable_svn, build #7936, system=mipsel-linux-uclibc-ssl-libusb-pcsc, nice=-1
    2013/02/17 16:47:49 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
    2013/02/17 16:47:49 0 s max. logsize=1000 Kb, loghistorysize=4096 bytes
    2013/02/17 16:47:49 0 s client timeout=5000 ms, fallback timeout=4900 ms, cache delay=120 ms
    2013/02/17 16:47:49 0 s services reloaded: 0 services freed, 3 services loaded, rejected 0
    2013/02/17 16:47:49 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
    2013/02/17 16:47:49 0 s signal handling initialized (type=sysv)
    2013/02/17 16:47:49 0 s 116 service-id's loaded in 6ms
    2013/02/17 16:47:49 0 s 116 tier-id's loaded
    2013/02/17 16:47:50 0 s 3 provid's loaded
    2013/02/17 16:47:50 0 s 22 lengths for caid guessing loaded
    2013/02/17 16:47:50 0 s ERROR: Cannot open file "/var/media/ftp/uStor01/service/oscam//oscam.whitelist" (errno=2 No such file or directory)
    2013/02/17 16:47:50 0 s ERROR: Cannot open file "/var/media/ftp/uStor01/service/oscam//oscam.cacheex" (errno=2 No such file or directory)
    2013/02/17 16:47:50 0 s Starting listener 0
    2013/02/17 16:47:50 0 s monitor: initialized (fd=8, port=988)
    2013/02/17 16:47:50 0 s Starting listener 0
    2013/02/17 16:47:50 0 s camd33: disabled
    2013/02/17 16:47:50 0 s Starting listener 0
    2013/02/17 16:47:50 0 s camd35: disabled
    2013/02/17 16:47:50 0 s Starting listener 0
    2013/02/17 16:47:50 0 s cs378x: disabled
    2013/02/17 16:47:50 0 s Starting listener 0
    2013/02/17 16:47:50 0 s newcamd: disabled
    2013/02/17 16:47:50 0 s Starting listener 0
    2013/02/17 16:47:50 0 s cccam: initialized (fd=9, port=12000, crypted)
    2013/02/17 16:47:50 0 s Starting listener 0
    2013/02/17 16:47:50 0 s pandora: disabled
    2013/02/17 16:47:50 0 s Starting listener 0
    2013/02/17 16:47:50 0 s csp: disabled
    2013/02/17 16:47:50 0 s Starting listener 0
    2013/02/17 16:47:50 0 s radegast: disabled
    2013/02/17 16:47:50 0 s starting thread http
    2013/02/17 16:47:50 0 s http thread started
    2013/02/17 16:47:50 599EF0 h HTTP Server listening on port 83
    2013/02/17 16:47:50 0 s starting thread reader check
    2013/02/17 16:47:50 0 s reader check thread started
    2013/02/17 16:47:50 0 s starting thread check
    2013/02/17 16:47:50 0 s check thread started
    2013/02/17 16:47:50 0 s skyv14 [mouse] creating thread for device /dev/ttyUSB0
    2013/02/17 16:47:50 0 s loadbalancer: can't read from file /tmp/.oscam/stat
    2013/02/17 16:47:50 0 s waiting for local card init
    2013/02/17 16:47:50 59BAB8 r skyv14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
    2013/02/17 16:47:51 59BAB8 r skyv14 [mouse] card detected
    2013/02/17 16:47:52 59BAB8 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
    2013/02/17 16:47:52 59BAB8 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
    2013/02/17 16:47:52 59BAB8 r skyv14 [mouse] Setting baudrate to 38400 bps
    2013/02/17 16:47:52 59BAB8 r skyv14 [mouse] Calculated work ETU is 26.05 us
    2013/02/17 16:47:52 59BAB8 r skyv14 [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
    2013/02/17 16:47:53 59BAB8 r skyv14 [mouse] Card type: P1TV
    2013/02/17 16:47:53 59BAB8 r skyv14 [mouse] Rom version: 20AA
    2013/02/17 16:47:54 59BAB8 r skyv14 [mouse] parental lock setting: FF FF FF FF
    2013/02/17 16:47:54 59BAB8 r skyv14 [mouse] type: VideoGuard Sky Germany (098C), caid: 098C
    2013/02/17 16:47:54 59BAB8 r skyv14 [mouse] serial: ########, BoxID: ########, baseyear: 2004
    2013/02/17 16:47:54 59BAB8 r skyv14 [mouse] ready for requests
    2013/02/17 16:47:54 59BAB8 r skyv14 [mouse] found card system videoguard2
    2013/02/17 16:47:54 59BAB8 r skyv14 [videoguard2] card detected
    2013/02/17 16:47:54 59BAB8 r skyv14 [videoguard2] type: VideoGuard Sky Germany (098C)
    2013/02/17 16:47:54 59BAB8 r skyv14 [videoguard2] tier: 0046, expiry date: 2013/05/28-01:00:00
    2013/02/17 16:47:54 59BAB8 r skyv14 [videoguard2] tier: 0056, expiry date: 2013/05/28-01:00:00
    2013/02/17 16:47:54 59BAB8 r skyv14 [videoguard2] tier: 0057, expiry date: 2013/05/28-01:00:00
    2013/02/17 16:47:55 59BAB8 r skyv14 [videoguard2] tier: 0058, expiry date: 2013/05/28-01:00:00
    2013/02/17 16:47:55 59BAB8 r skyv14 [videoguard2] tier: 005a, expiry date: 2013/05/28-01:00:00
    2013/02/17 16:47:55 59BAB8 r skyv14 [videoguard2] tier: 0065, expiry date: 2013/05/28-01:00:00
    2013/02/17 16:47:55 59BAB8 r skyv14 [videoguard2] tier: 0066, expiry date: 2013/05/28-01:00:00
    2013/02/17 16:47:55 59BAB8 r skyv14 [videoguard2] tier: 0067, expiry date: 2013/05/28-01:00:00
    2013/02/17 16:47:55 59BAB8 r skyv14 [videoguard2] tier: 0068, expiry date: 2013/05/28-01:00:00
    2013/02/17 16:47:55 59BAB8 r skyv14 [videoguard2] tier: 0069, expiry date: 2013/05/28-01:00:00
    2013/02/17 16:47:55 59BAB8 r skyv14 [videoguard2] tier: 006a, expiry date: 2013/05/28-01:00:00
    2013/02/17 16:47:55 59BAB8 r skyv14 [videoguard2] tier: 006b, expiry date: 2013/05/28-01:00:00
    2013/02/17 16:47:55 59BAB8 r skyv14 [videoguard2] tier: 006c, expiry date: 2013/05/28-01:00:00
    2013/02/17 16:47:55 59BAB8 r skyv14 [videoguard2] tier: 006d, expiry date: 2013/05/28-01:00:00
    2013/02/17 16:47:55 59BAB8 r skyv14 [videoguard2] tier: 006e, expiry date: 2013/05/28-01:00:00
    2013/02/17 16:47:55 59BAB8 r skyv14 [videoguard2] tier: 006f, expiry date: 2013/05/28-01:00:00
    2013/02/17 16:47:55 59BAB8 r skyv14 [videoguard2] tier: 007b, expiry date: 2013/05/28-01:00:00
    2013/02/17 16:47:55 59BAB8 r skyv14 [videoguard2] tier: 007d, expiry date: 2013/05/28-01:00:00
    2013/02/17 16:47:55 59BAB8 r skyv14 [videoguard2] tier: 0081, expiry date: 2013/05/28-01:00:00
    2013/02/17 16:47:55 59BAB8 r skyv14 [videoguard2] tier: 008e, expiry date: 2013/05/28-01:00:00
    2013/02/17 16:47:55 59BAB8 r skyv14 [videoguard2] tier: 00c0, expiry date: 2013/05/28-01:00:00
    2013/02/17 16:47:56 59BAB8 r skyv14 [videoguard2] tier: 00c7, expiry date: 2013/05/28-01:00:00
    2013/02/17 16:47:56 59BAB8 r skyv14 [videoguard2] tier: 00c8, expiry date: 2013/05/28-01:00:00
    2013/02/17 16:47:56 59BAB8 r skyv14 [videoguard2] tier: 00c9, expiry date: 2013/05/28-01:00:00
    2013/02/17 16:47:56 59BAB8 r skyv14 [videoguard2] tier: 00ca, expiry date: 2013/05/28-01:00:00
    2013/02/17 16:47:56 59BAB8 r skyv14 [videoguard2] tier: 00cb, expiry date: 2013/05/28-01:00:00
    2013/02/17 16:47:56 59BAB8 r skyv14 [videoguard2] tier: 00f3, expiry date: 2013/05/28-01:00:00
    2013/02/17 16:47:56 59BAB8 r skyv14 [videoguard2] tier: 00fa, expiry date: 2013/05/28-01:00:00
    2013/02/17 16:47:56 59BAB8 r skyv14 [videoguard2] tier: 00ff, expiry date: 2013/05/28-01:00:00
    2013/02/17 16:48:10 0 s init for all local cards done
    2013/02/17 16:48:10 0 s anti cascading disabled
    2013/02/17 16:48:10 5A77D8 c anonymous disconnected from 192.168.178.2
    2013/02/17 16:48:10 5A8FE8 c encrypted cccam-client 192.168.178.2 granted (gottschi, au=auto (1 reader))
    2013/02/17 16:48:22 5A8FE8 c gottschi disconnected from 192.168.178.2
    2013/02/17 16:48:25 5A77D8 c encrypted cccam-client 192.168.178.2 granted (gottschi, au=auto (1 reader))
    langsam verzweifel ich....:-((
     
    Zuletzt von einem Moderator bearbeitet: 17. Februar 2013
    #11
  13. Kermit
    Offline

    Kermit Guest

    AW: bekomme meine Easymouse 2 nicht dauerhaft zum laufen

    Hi,

    ich nehme an auf dem Client läuft CCcam. Gibt es dort eine CCcam.prio (zu finden im selben Verzeichnis wie die CCcam.cfg)?
    Wenn ja diese mal übreprüfen und ansonsten auf dem Server mal ohne Services testen.

    Grüße

    Kermit
     
    #12
  14. gottschi
    Offline

    gottschi Newbie

    Registriert:
    2. März 2011
    Beiträge:
    12
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    AW: bekomme meine Easymouse 2 nicht dauerhaft zum laufen

    cccam.prio auf dem client sieht so aus:
    # in this file you can configure what CAIDs CCcam should prefer or ignore
    # defaults to /var/etc/CCcam.prio
    # file content can have ignores (I) and prio lists (P)
    #
    # situation 1: ignore allways this caid, all idents, on all channels
    # I: caid
    #
    # situation 2: ignore allways this caid/ident pair
    # I: caid:ident
    #
    # situation 3: ignore this caid/ident pair, on channel 'sid'
    # I: caid:ident:sid
    #
    # situation 4: when both caid1 and caid2 exist for a channel, prefer caid1 over caid2
    # P: caid1, caid2
    #
    # situation 5: when caid1:ident1 till caidN:identN exist for a channel, use them in order of this list.
    # P: caid1:ident1, caid2:ident2, .., caidN:identN
    #
    # situation 6: when caid1:ident1 till caidN:identN exist for channel 'sid', use them in order of this list.
    # Sid on first caid/ident pair identifies sid for which list is used. All other sids ignore this list.
    # P: caid1:ident1:sid, caid2:ident2, .., caidN:identN
    #
    #CAID PRIO FILE : /var/etc/CCcam.prio
    was soll ich da prüfen und was meinst du mit "auf dem Server mal ohne Services testen"?
     
    Zuletzt von einem Moderator bearbeitet: 17. Februar 2013
    #13
  15. Kermit
    Offline

    Kermit Guest

    AW: bekomme meine Easymouse 2 nicht dauerhaft zum laufen

    Hi,

    es hätte sein können, dass über die CCcam.prio einzelne Caids gesperrt sind und das wollte ich ausschließen. Ist bei dir aber nicht der Fall.
    Ohne Services testen bedeute du sollst auf dem Server mal die Einstellungen bzgl Services heraus nehmen.

    Grüße

    Kermit
     
    #14
  16. gottschi
    Offline

    gottschi Newbie

    Registriert:
    2. März 2011
    Beiträge:
    12
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    wie mache ich das?

    logfile sieht nun so aus....
    ---------------------------------------------------------------------------
    >> OSCam << cardserver started at Sun Feb 17 17:39:26 2013
    -------------------------------------------------------------------------------
    2013/02/17 17:39:26 0 s starting thread log_list_thread
    2013/02/17 17:39:26 0 s log_list_thread thread started
    2013/02/17 17:39:26 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7936 (mipsel-linux-uclibc-ssl-libusb-pcsc)
    2013/02/17 17:39:26 0 s version=1.20-unstable_svn, build #7936, system=mipsel-linux-uclibc-ssl-libusb-pcsc, nice=-1
    2013/02/17 17:39:26 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
    2013/02/17 17:39:26 0 s max. logsize=1000 Kb, loghistorysize=4096 bytes
    2013/02/17 17:39:26 0 s client timeout=5000 ms, fallback timeout=4900 ms, cache delay=120 ms
    2013/02/17 17:39:26 0 s services reloaded: 0 services freed, 3 services loaded, rejected 0
    2013/02/17 17:39:26 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
    2013/02/17 17:39:26 0 s signal handling initialized (type=sysv)
    2013/02/17 17:39:26 0 s 116 service-id's loaded in 5ms
    2013/02/17 17:39:26 0 s 116 tier-id's loaded
    2013/02/17 17:39:26 0 s 3 provid's loaded
    2013/02/17 17:39:26 0 s 22 lengths for caid guessing loaded
    2013/02/17 17:39:26 0 s ERROR: Cannot open file "/var/media/ftp/uStor01/service/oscam//oscam.whitelist" (errno=2 No such file or directory)
    2013/02/17 17:39:26 0 s ERROR: Cannot open file "/var/media/ftp/uStor01/service/oscam//oscam.cacheex" (errno=2 No such file or directory)
    2013/02/17 17:39:26 0 s Starting listener 0
    2013/02/17 17:39:26 0 s monitor: initialized (fd=8, port=988)
    2013/02/17 17:39:26 0 s Starting listener 0
    2013/02/17 17:39:26 0 s camd33: disabled
    2013/02/17 17:39:26 0 s Starting listener 0
    2013/02/17 17:39:26 0 s camd35: disabled
    2013/02/17 17:39:26 0 s Starting listener 0
    2013/02/17 17:39:26 0 s cs378x: disabled
    2013/02/17 17:39:26 0 s Starting listener 0
    2013/02/17 17:39:26 0 s newcamd: disabled
    2013/02/17 17:39:26 0 s Starting listener 0
    2013/02/17 17:39:26 0 s cccam: initialized (fd=9, port=12000, crypted)
    2013/02/17 17:39:26 0 s Starting listener 0
    2013/02/17 17:39:26 0 s pandora: disabled
    2013/02/17 17:39:26 0 s Starting listener 0
    2013/02/17 17:39:26 0 s csp: disabled
    2013/02/17 17:39:26 0 s Starting listener 0
    2013/02/17 17:39:26 0 s radegast: disabled
    2013/02/17 17:39:26 0 s starting thread http
    2013/02/17 17:39:26 0 s http thread started
    2013/02/17 17:39:26 0 s starting thread reader check
    2013/02/17 17:39:26 0 s reader check thread started
    2013/02/17 17:39:26 0 s starting thread check
    2013/02/17 17:39:26 599FD0 h HTTP Server listening on port 83
    2013/02/17 17:39:26 0 s check thread started
    2013/02/17 17:39:26 0 s skyv14 [mouse] creating thread for device /dev/ttyUSB0
    2013/02/17 17:39:26 0 s loadbalancer: can't read from file /tmp/.oscam/stat
    2013/02/17 17:39:26 0 s waiting for local card init
    2013/02/17 17:39:27 59BA50 r skyv14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
    2013/02/17 17:39:27 59BA50 r skyv14 [mouse] card detected
    2013/02/17 17:39:29 59BA50 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
    2013/02/17 17:39:29 59BA50 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
    2013/02/17 17:39:29 59BA50 r skyv14 [mouse] Setting baudrate to 38400 bps
    2013/02/17 17:39:29 59BA50 r skyv14 [mouse] Calculated work ETU is 26.05 us
    2013/02/17 17:39:29 59BA50 r skyv14 [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
    2013/02/17 17:39:30 59BA50 r skyv14 [mouse] Card type: P1TV
    2013/02/17 17:39:30 59BA50 r skyv14 [mouse] Rom version: 20AA
    2013/02/17 17:39:31 59BA50 r skyv14 [mouse] parental lock setting: FF FF FF FF
    2013/02/17 17:39:31 59BA50 r skyv14 [mouse] type: VideoGuard Sky Germany (098C), caid: 098C
    2013/02/17 17:39:31 59BA50 r skyv14 [mouse] serial: ########, BoxID: ########, baseyear: 2004
    2013/02/17 17:39:31 59BA50 r skyv14 [mouse] ready for requests
    2013/02/17 17:39:31 59BA50 r skyv14 [mouse] found card system videoguard2
    2013/02/17 17:39:31 59BA50 r skyv14 [videoguard2] card detected
    2013/02/17 17:39:31 59BA50 r skyv14 [videoguard2] type: VideoGuard Sky Germany (098C)
    2013/02/17 17:39:31 59BA50 r skyv14 [videoguard2] tier: 0046, expiry date: 2013/05/28-01:00:00
    2013/02/17 17:39:31 59BA50 r skyv14 [videoguard2] tier: 0056, expiry date: 2013/05/28-01:00:00
    2013/02/17 17:39:31 59BA50 r skyv14 [videoguard2] tier: 0057, expiry date: 2013/05/28-01:00:00
    2013/02/17 17:39:31 59BA50 r skyv14 [videoguard2] tier: 0058, expiry date: 2013/05/28-01:00:00
    2013/02/17 17:39:31 59BA50 r skyv14 [videoguard2] tier: 005a, expiry date: 2013/05/28-01:00:00
    2013/02/17 17:39:31 59BA50 r skyv14 [videoguard2] tier: 0065, expiry date: 2013/05/28-01:00:00
    2013/02/17 17:39:32 59BA50 r skyv14 [videoguard2] tier: 0066, expiry date: 2013/05/28-01:00:00
    2013/02/17 17:39:32 59BA50 r skyv14 [videoguard2] tier: 0067, expiry date: 2013/05/28-01:00:00
    2013/02/17 17:39:32 59BA50 r skyv14 [videoguard2] tier: 0068, expiry date: 2013/05/28-01:00:00
    2013/02/17 17:39:32 59BA50 r skyv14 [videoguard2] tier: 0069, expiry date: 2013/05/28-01:00:00
    2013/02/17 17:39:32 59BA50 r skyv14 [videoguard2] tier: 006a, expiry date: 2013/05/28-01:00:00
    2013/02/17 17:39:32 59BA50 r skyv14 [videoguard2] tier: 006b, expiry date: 2013/05/28-01:00:00
    2013/02/17 17:39:32 59BA50 r skyv14 [videoguard2] tier: 006c, expiry date: 2013/05/28-01:00:00
    2013/02/17 17:39:32 59BA50 r skyv14 [videoguard2] tier: 006d, expiry date: 2013/05/28-01:00:00
    2013/02/17 17:39:32 59BA50 r skyv14 [videoguard2] tier: 006e, expiry date: 2013/05/28-01:00:00
    2013/02/17 17:39:32 59BA50 r skyv14 [videoguard2] tier: 006f, expiry date: 2013/05/28-01:00:00
    2013/02/17 17:39:32 59BA50 r skyv14 [videoguard2] tier: 007b, expiry date: 2013/05/28-01:00:00
    2013/02/17 17:39:32 59BA50 r skyv14 [videoguard2] tier: 007d, expiry date: 2013/05/28-01:00:00
    2013/02/17 17:39:32 59BA50 r skyv14 [videoguard2] tier: 0081, expiry date: 2013/05/28-01:00:00
    2013/02/17 17:39:32 59BA50 r skyv14 [videoguard2] tier: 008e, expiry date: 2013/05/28-01:00:00
    2013/02/17 17:39:32 59BA50 r skyv14 [videoguard2] tier: 00c0, expiry date: 2013/05/28-01:00:00
    2013/02/17 17:39:32 59BA50 r skyv14 [videoguard2] tier: 00c7, expiry date: 2013/05/28-01:00:00
    2013/02/17 17:39:32 59BA50 r skyv14 [videoguard2] tier: 00c8, expiry date: 2013/05/28-01:00:00
    2013/02/17 17:39:33 59BA50 r skyv14 [videoguard2] tier: 00c9, expiry date: 2013/05/28-01:00:00
    2013/02/17 17:39:33 59BA50 r skyv14 [videoguard2] tier: 00ca, expiry date: 2013/05/28-01:00:00
    2013/02/17 17:39:33 59BA50 r skyv14 [videoguard2] tier: 00cb, expiry date: 2013/05/28-01:00:00
    2013/02/17 17:39:33 59BA50 r skyv14 [videoguard2] tier: 00f3, expiry date: 2013/05/28-01:00:00
    2013/02/17 17:39:33 59BA50 r skyv14 [videoguard2] tier: 00fa, expiry date: 2013/05/28-01:00:00
    2013/02/17 17:39:33 59BA50 r skyv14 [videoguard2] tier: 00ff, expiry date: 2013/05/28-01:00:00
    2013/02/17 17:39:46 0 s init for all local cards done
    2013/02/17 17:39:46 0 s anti cascading disabled
    2013/02/17 17:39:46 5A7758 c anonymous disconnected from 192.168.178.2
    2013/02/17 17:39:47 5AA928 c encrypted cccam-client 192.168.178.2 granted (gottschi, au=auto (1 reader))
    2013/02/17 18:08:41 5AA928 c gottschi (098C&000000/0000/EF10/98:E662): rejected group (121 ms) (0/0/0/0) (no matching reader)
    2013/02/17 18:08:47 5AA928 c gottschi (098C&000000/0000/EF10/98:0598): rejected group (120 ms) (0/0/0/0) (no matching reader)
    2013/02/17 18:08:51 5AA928 c gottschi disconnected from 192.168.178.2
    2013/02/17 18:08:53 5A7690 c encrypted cccam-client 192.168.178.2 granted (gottschi, au=auto (1 reader))
    2013/02/17 18:08:57 5A7690 c gottschi (098C&000000/0000/EF10/98:8896): rejected group (121 ms) (0/0/0/0) (no matching reader)
    2013/02/17 18:08:59 5A7690 c gottschi (098C&000000/0000/0083/98:3590): rejected group (121 ms) (0/0/0/0) (no matching reader)
    2013/02/17 18:09:01 5A7690 c gottschi (098C&000000/0000/0083/98:CCB4): rejected group (120 ms) (0/0/0/0) (no matching reader)
    2013/02/17 18:09:05 5A7690 c gottschi (098C&000000/0000/006B/98:31CE): rejected group (120 ms) (0/0/0/0) (no matching reader)
    2013/02/17 18:09:13 5A7690 c gottschi (098C&000000/0000/006B/98:FD13): rejected group (120 ms) (0/0/0/0) (no matching reader)
    2013/02/17 18:09:15 5A7690 c gottschi (098C&000000/0000/EF11/98:47EF): rejected group (120 ms) (0/0/0/0) (no matching reader)
    was kann das jetzt sein?

    Hab es hinbekommen.
    Habe auch aus der oscam.Server die services raus genommen.
    Jetzt läuft es einwandfrei.

    Kermit danke fürDeine Hilfe.

    Ohne Deine Tips wäre ich nie soweit gekommen!!!!!!

    Danke
     
    Zuletzt von einem Moderator bearbeitet: 17. Februar 2013
    #15

Diese Seite empfehlen