Nozzy
Ist gelegentlich hier
Ich habe nun schon Stunden damit verbracht meine Serverbox so einzurichten, daß ich im Homenetz sharen kann und im I-Net.
Allerdings habe ich immer das Problem, daß sobald sich ein User connected der Server nach 5 Sekunden stehen bleibt. Sprich ich habe ein Standbild.
Einmal hoch und runter gezappt und schon läuft alles wieder.
Ich nutze als Server eine Dbox mit Ahab Multicam ud einer I02 Karte.
folgende newcs.xml habe ich auf dieser Box
<newCSconfig>
<readers name="Dbox">
<device>
<name>Multicam</name>
<type>dbox</type>
<mhz>600</mhz>
<node>/dev/tts/1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<boxkey>00000000</boxkey>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<priority>round</priority>
</device>
</readers>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp,udp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<logfile></logfile>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>newcsuser</name>
<password>newcspasswort</password>
<hostname>localhost</hostname>
<port>34000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<rate>2</rate>
</user>
</newcamdserver>
<httpd>
<server>
<port>8088</port>
<enabled>yes</enabled>
</server>
<user>
<name>test</name>
<password>test</password>
<accesslevel>admin</accesslevel>
</user></httpd></newCSconfig>
</newcamdserver>
<enabled>Yes</enabled>
</newCSconfig>
Wenn ich mich mit telnet verbinde kommtfolgendes newcs log
ZebraDem Image 3.0 - Sagem D-BOX2 - Kernel 2.4.36.6-dbox2 (17:42:00)...
dbox login: root
BusyBox v1.7.2 (2008-10-24 03:50:00 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/var # newcs
This is NewCS 1.61 - the New CardServer by the Butter-team..
Compiled on Aug 17 2008 at 21:41:15
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is enabled, set to: NewCSpwd
TCP-log set to simple mode
level: normal
type: init
output: console,tcp,udp
logger config: level 1 type 3 output 7
Console log options: level 1 type 3
logger: no udp host defined, udp log disabled
TCP log options: level 1 type 3
[ 17:42:05 ] [ Box detect ] Box type 4 (Dbox2)
[ 17:42:05 ] [ Config ] Option <blockc0> for device 0 (Multicam) not present, de
faulting to NO
[ 17:42:05 ] [ Config ] Value in <ipk> for device 0 (Multicam) is INVALID, skipp
ing...
[ 17:42:05 ] [ Config ] Value in <ucpk> for device 0 (Multicam) is INVALID, skip
ping...
[ 17:42:05 ] [ Config ] /dev/tts/1 ECM priority: round
[ 17:42:06 ] [ Config ] Option <spider> not present for User: newcsuser, default
ing to NO
[ 17:42:06 ] [ httpd ] httpd-user: tom, password: kiosk, accesslevel: admin
[ 17:42:06 ] [ EMM Cache ] Initialising dynamic Cache
[ 17:42:06 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 1523
[ 17:42:06 ] [ Loader ] Starting Telnet on port 1001
[ 17:42:06 ] bind: error! 98: Address already in use
Can't create server: Address already in use
[ 17:42:06 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 17:42:06 ] [ Dbox ] Opening device /dev/tts/1
[ 17:42:07 ] [ Loader ] Unknown card
[ 17:42:07 ] [ Loader ] Trying Irdeto (T=14)
[ 17:42:07 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 17:42:07 ] [ Dbox ] Opening device /dev/tts/1
[ 17:42:09 ] [ ATR ] T=14 1etu=104.17us Guardtime:17etu WWT:9600etu
[ 17:42:09 ] [ ATR ] Historical bytes: I R D E T O A C S [03] [84] U [FF] [80]
[ 17:42:09 ] [ Loader ] Init Irdeto card
[ 17:42:15 ] [ Keyman ] Adding key 6D15F type 0 on Provider 000000 for caid 1722
ID=0
[ 17:42:17 ] [ Keyman ] Adding key 495244 type 1 on Provider 000000 for caid 172
2 ID=0
[ 17:42:17 ] [ Keyman ] Skipping duplicate irdeto
[ 17:42:17 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 000001 for caid 172
2 ID=1
[ 17:42:17 ] [ Keyman ] Skipping duplicate irdeto
[ 17:42:17 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 000002 for caid 172
2 ID=2
[ 17:42:17 ] [ Keyman ] Skipping duplicate irdeto
[ 17:42:17 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 000003 for caid 172
2 ID=3
[ 17:42:22 ] [ Loader ] Card 1722 on port /dev/tts/1 ready
[ 17:42:22 ] [ Loader ] Starting Newcamd Server on port 34000
[ 17:42:22 ] [ Newcamd ] Newcamd thread Server started on port 34000
[ 17:42:22 ] bind: error! 98: Address already in use
[ 17:42:22 ] [ NewCS ] Ready to GO!
/var #
Habe aber bei diesem log ein Standbild. Der Homeclient ist dabei auch gerade stehengeblieben.
Ich weiß einfach nicht mehr weiter.... wenn ich CCcam und Newcs alleine laufen lasse sprich ohne Clienten hängt es nicht ein einziges mal.
Auch habe ich extra drauf geachtet, daß niemand den gleichen Namen als Client hat.
Bitte um Hilfe!!
THX Nozzy
Allerdings habe ich immer das Problem, daß sobald sich ein User connected der Server nach 5 Sekunden stehen bleibt. Sprich ich habe ein Standbild.
Einmal hoch und runter gezappt und schon läuft alles wieder.
Ich nutze als Server eine Dbox mit Ahab Multicam ud einer I02 Karte.
folgende newcs.xml habe ich auf dieser Box
<newCSconfig>
<readers name="Dbox">
<device>
<name>Multicam</name>
<type>dbox</type>
<mhz>600</mhz>
<node>/dev/tts/1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<boxkey>00000000</boxkey>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<priority>round</priority>
</device>
</readers>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp,udp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<logfile></logfile>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>newcsuser</name>
<password>newcspasswort</password>
<hostname>localhost</hostname>
<port>34000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<rate>2</rate>
</user>
</newcamdserver>
<httpd>
<server>
<port>8088</port>
<enabled>yes</enabled>
</server>
<user>
<name>test</name>
<password>test</password>
<accesslevel>admin</accesslevel>
</user></httpd></newCSconfig>
</newcamdserver>
<enabled>Yes</enabled>
</newCSconfig>
Wenn ich mich mit telnet verbinde kommtfolgendes newcs log
ZebraDem Image 3.0 - Sagem D-BOX2 - Kernel 2.4.36.6-dbox2 (17:42:00)...
dbox login: root
BusyBox v1.7.2 (2008-10-24 03:50:00 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/var # newcs
This is NewCS 1.61 - the New CardServer by the Butter-team..
Compiled on Aug 17 2008 at 21:41:15
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is enabled, set to: NewCSpwd
TCP-log set to simple mode
level: normal
type: init
output: console,tcp,udp
logger config: level 1 type 3 output 7
Console log options: level 1 type 3
logger: no udp host defined, udp log disabled
TCP log options: level 1 type 3
[ 17:42:05 ] [ Box detect ] Box type 4 (Dbox2)
[ 17:42:05 ] [ Config ] Option <blockc0> for device 0 (Multicam) not present, de
faulting to NO
[ 17:42:05 ] [ Config ] Value in <ipk> for device 0 (Multicam) is INVALID, skipp
ing...
[ 17:42:05 ] [ Config ] Value in <ucpk> for device 0 (Multicam) is INVALID, skip
ping...
[ 17:42:05 ] [ Config ] /dev/tts/1 ECM priority: round
[ 17:42:06 ] [ Config ] Option <spider> not present for User: newcsuser, default
ing to NO
[ 17:42:06 ] [ httpd ] httpd-user: tom, password: kiosk, accesslevel: admin
[ 17:42:06 ] [ EMM Cache ] Initialising dynamic Cache
[ 17:42:06 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 1523
[ 17:42:06 ] [ Loader ] Starting Telnet on port 1001
[ 17:42:06 ] bind: error! 98: Address already in use
Can't create server: Address already in use
[ 17:42:06 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 17:42:06 ] [ Dbox ] Opening device /dev/tts/1
[ 17:42:07 ] [ Loader ] Unknown card
[ 17:42:07 ] [ Loader ] Trying Irdeto (T=14)
[ 17:42:07 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 17:42:07 ] [ Dbox ] Opening device /dev/tts/1
[ 17:42:09 ] [ ATR ] T=14 1etu=104.17us Guardtime:17etu WWT:9600etu
[ 17:42:09 ] [ ATR ] Historical bytes: I R D E T O A C S [03] [84] U [FF] [80]
[ 17:42:09 ] [ Loader ] Init Irdeto card
[ 17:42:15 ] [ Keyman ] Adding key 6D15F type 0 on Provider 000000 for caid 1722
ID=0
[ 17:42:17 ] [ Keyman ] Adding key 495244 type 1 on Provider 000000 for caid 172
2 ID=0
[ 17:42:17 ] [ Keyman ] Skipping duplicate irdeto
[ 17:42:17 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 000001 for caid 172
2 ID=1
[ 17:42:17 ] [ Keyman ] Skipping duplicate irdeto
[ 17:42:17 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 000002 for caid 172
2 ID=2
[ 17:42:17 ] [ Keyman ] Skipping duplicate irdeto
[ 17:42:17 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 000003 for caid 172
2 ID=3
[ 17:42:22 ] [ Loader ] Card 1722 on port /dev/tts/1 ready
[ 17:42:22 ] [ Loader ] Starting Newcamd Server on port 34000
[ 17:42:22 ] [ Newcamd ] Newcamd thread Server started on port 34000
[ 17:42:22 ] bind: error! 98: Address already in use
[ 17:42:22 ] [ NewCS ] Ready to GO!
/var #
Habe aber bei diesem log ein Standbild. Der Homeclient ist dabei auch gerade stehengeblieben.
Ich weiß einfach nicht mehr weiter.... wenn ich CCcam und Newcs alleine laufen lasse sprich ohne Clienten hängt es nicht ein einziges mal.
Auch habe ich extra drauf geachtet, daß niemand den gleichen Namen als Client hat.
Bitte um Hilfe!!
THX Nozzy
